Shop By Product Matching "Cadillac"
Choose your Engine for your 2025 Cadillac XT5
Image
Product
Price
- Aeroskin Hood Protector; Smoke
- Aeroskin Hood Protector - Smoke
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Low Profile
- WEB: Color: Smoke
- WEB: Material: Modified Acrylic
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Available in nail-tough acrylic or impact-resistant ABS plastic (depending on finish).
- Choose dark smoke, matte black, or chrome finish.
- The lowest profile protection available for that sleek, custom touch.
- Custom-molded to match the contours of your hood. Instantly adds a custom look to your ride.
- Mounts in minutes with 3M automotive grade adhesive mounting tape (included).
- Made in the USA with global materials.
- Put the first name in low-profile hood protection to work at the front of your rig. The AVS Aeroskin® keeps bugs, dirt and debris off your paint and out of your way while adding that better-than-factory custom touch. Built from high-quality ABS impact-resistant acrylic available in dark smoke finish, matte black or chrome. Custom molded to the contours of your vehicle to fit better and last longer. Its simple, no-drill installation with 3M automotive-grade adhesive tape gets your car, truck, van or SUV fully protected, looking good, and back on the road in no time. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2025 - Cadillac XT5 | United States |
- Raybestos R-Line
- Product Attributes:
- Pad Shims Included: Yes
- Friction Material Attachment: Integrally Molded
- FMSI Number: D2303-9539
- Friction Material Slot Type: Slotted
- Mounting Hardware Included: Yes
- Chamfered Edges: No
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Attached: Yes
- Pad Wear Sensor Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
84794110, 84881071, 84881072
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2025 - Cadillac XT5 | Rear |
- Raybestos Element 3
- Product Attributes:
- Pad Shims Included: Yes
- Friction Material Attachment: Integrally Molded
- FMSI Number: D2303-9539
- Friction Material Slot Type: Slotted
- Mounting Hardware Included: Yes
- Chamfered Edges: No
- Friction Material Composition: Hybrid
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Attached: Yes
- Pad Wear Sensor Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
21-2303, 84794110, 84881071, 84881072
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2025 - Cadillac XT5 | Rear |
- Plastic Oil Drain Plug
- Package Quantity: 1 Dorman - AutoGrade - Oil-Tite! Packaging Type: Clamshell
- Product Attributes:
- Método de drenaje: Tradicional
- SAE or Metric: Sae
- Magnetic:
- No
- Non
- Thread Type:
- Coarse
- Grueso
- Oversized Thread:
- No
- Non
- Describir el tipo: Tapón De Drenaje De Aceite
- Special Tool Required:
- Oui
- Sí
- Yes
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- O-ring
- Sello Tipo O
- Color:
- Black
- Negro
- Noir
- Socket Points: 4
- Head Tool Size: 0.25 In
- Thread Diameter: 0.6
- Contenidos del paquete: 1 Tapón De Drenaje
- Describe Type: Oil Drain Plug
- Head Drive Type:
- Cuadrado
- Square
- Material:
- Plastic
- Plástico
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
12713651, 55498782
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Cadillac XT5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle |
|---|
| 2025 - Cadillac XT5 |
- Schrader 90 degree EZ-sensor - Programmable TPMS Sensor (Sensor Body Only)
- Use 33500 if 33900 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree No stem Nickel-Plated Brass Core
- Product Attributes:
- Washer Included: No
- Manufacturer Warranty: 2 Years
- Grommets Included: Yes
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 53 Inch/lbs.
- Valve Stem Included: No
- Attachment Type: Clamp-in
- Mounting Location: Wheel
- Programmed/Programmable: Programmed
- Frequency: 314.9mhz, 315mhz, 433mhz
- Core Material: Nickel-plated Brass
- Recommended Torque (N-m): 6 N-m
- Valve Cap Included: No
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Ready out of the box
- OE fit, form, and function
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with rubber snap-in valve stems or fixed angle aluminum clamp-in stems, available in silver and matte black. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.
Additional Fitment Information:
| Vehicle |
|---|
| 2025 - Cadillac XT5 |
- Raybestos Specialty - Street Performance
- Product Attributes:
- Overall Height:
- 2.004
- 50.9
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.641
- 16.25
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Inside Diameter:
- 214
- 8.425
- Center Hole Diameter:
- 2.657
- 67.5
- Stud/Lug Hole Quantity: 6
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.181
- 30
- Surface Type: Smooth
- Mounting Bolt Hole Quantity: 6
- Discard Thickness:
- 1.063
- 27
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120
- 4.724
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.62174, 121.62174, 126.62174SL, 126.62174SR, 127.62174L, 127.62174R, 128.62174L, 128.62174R, 13516727, 13516729, 13526769, 13536149, 13546861, 13588401, 41345, 600-46047, BD180686E, BR901698...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2025 - Cadillac XT5 | Front |
- Aeroskin Hood Protector; Chrome
- Aeroskin Hood Protector - Chrome
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Low Profile
- WEB: Color: Chrome
- WEB: Material: Thermoplastic Abs
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Available in nail-tough acrylic or impact-resistant ABS plastic (depending on finish).
- Choose dark smoke, matte black, or chrome finish.
- The lowest profile protection available for that sleek, custom touch.
- Custom-molded to match the contours of your hood. Instantly adds a custom look to your ride.
- Mounts in minutes with 3M automotive grade adhesive mounting tape (included).
- Made in the USA with global materials.
- Put the first name in low-profile hood protection to work at the front of your rig. The AVS Aeroskin® keeps bugs, dirt and debris off your paint and out of your way while adding that better-than-factory custom touch. Built from high-quality ABS impact-resistant acrylic available in dark smoke finish, matte black or chrome. Custom molded to the contours of your vehicle to fit better and last longer. Its simple, no-drill installation with 3M automotive-grade adhesive tape gets your car, truck, van or SUV fully protected, looking good, and back on the road in no time. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2025 - Cadillac XT5 | United States |
- Ventvisor Deflector; Smoke; Low Profile; In-Channel Mount; 4 piece
- In-Channel Mount
- Ventvisor Low Profile Deflector; Smoke; In-Channel Mount; 4 piece
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Low Profile
- WEB: Color: Smoke
- WEB: Material: Modified Acrylic
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Gives your ride that customized high-speed, low-profile look.
- Blocks wind noise, circulates fresh air, and keeps your cab cooler.
- Its high-grade, UV-resistant acrylic material is scratch resistant, car wash safe, and will never fade.
- Mounts in minutes with 3M automotive grade adhesive mounting tape (included).
- Covered by the AVS limited lifetime warranty.
- Made in the USA with global materials.
- Hit the open road in style with the lowest profile window deflector on the market. The AVS Low Profile Ventvisor is designed to complete the look of your vehicle by adding subtle style while maintaining the functionality you desire from a side window de?ector. Made of impact resistant acrylic with a dark smoke finish or warp-resistant ABS construction in a chrome or matte black finish, this Ventvisor is strong yet ?exible enough to withstand all of nature’s elements, from rain and ice to scratching branches and glaring sun. It comes custom-molded to match your vehicle’s year, make, and model, and hugs the contours of your car for a sleek, aerodynamic look. Installation is hassle-free and can be done it minutes from the comfort of your own home. No drilling or tools required, just attach using the included 3M automotive grade adhesive. Once installed, it’s easy to refresh your morning commute by rolling down your windows and circulating air through your cab, keeping it fresh and scent-free even in bad weather. When parked, leave the windows cracked to prevent heat buildup while keeping rain out. Plus, it’s backed by a Limited Lifetime Warranty. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2025 - Cadillac XT5 | United States |
- FRAM, PH12750, Oil Filter
- Spin-on Oil Filter OE Style
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.39
- Non Slip Grip: Yes
- Gasket Thickness: 0.38
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M22x1.5
- Grade: Advanced
- Gasket Outside Diameter: 2.77
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
100412, 12693541, FD12750, FF12750, M9512, MOPH12750, MSL10412, PH1500, PL21495, S45013, UPF63R, VO-201, WL10412, WL610412, WPH1500, XG12750
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Cadillac XT5 | V | - | 6 Cyl 3.6L | 222 |
Showing 1 - 10 of 32 products
Loading...