Shop By Product Matching "DBS"
Choose your Engine for your 1972 Chevrolet Biscayne
Image
Product
Price
- Relief pressure 16 lb
- Safety Lever
This Part Fits the Following OEM/Substitute Numbers:
10330, 10330ST, 12R7S, 1678-290347, 17216, 380170, 7716, 9ST16, P7716, ST16
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | L | 4097 | 6 Cyl 4.1L | 250 |
- Standard Design with 8.5 (in) Ring Gear with Pontiac Axle
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Chevrolet Biscayne | Rear |
- Standard Design with 8.875 (in) Ring Gear with Pontiac Axle
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03507898AB, 051-4086, 15595140, 1559TS, 1559TSK, 1559TV, 2931851, 3507898, 3507898AB, 3744495, 38-01116, 461689, 5-2057, 513000, 6408, 68003414AA, 7451275, 7451809...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Chevrolet Biscayne | Rear |
- Engine Connecting Rod Bearing Pair
- High Performance H Series (Tri-Metal) Standard XN - .001in Extra Oil Clearance / Narrowed
- Clevite H-Series performance bearings have a medium level of eccentricity, high crush, and a hardened steel back and thin overlay. These bearings are made without flash plating for better seating. Use H-Series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | V | - | 8 Cyl 5.7L | 350 |
- Engine Connecting Rod Bearing Pair
- High Performance H Series (Tri-Metal) Standard XN - .001in Extra Oil Clearance / Narrowed
- Clevite H-Series performance bearings have a medium level of eccentricity, high crush, and a hardened steel back and thin overlay. These bearings are made without flash plating for better seating. Use H-Series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
8-7100CH1X, CR807XPNX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | V | - | 8 Cyl 5.7L | 350 |
- Stealth Pro Ratchet Automatic Shifter
- Stealth Pro Ratchet Automatic Shifter; 3/4 Speed; Floor; w/Cover; Includes Shifter Assembly/5 ft. Super Duty Race Cable/Brackets; Black Anodized;
- Product Attributes:
- California Proposition 65 Chemical Name 5: Altretamine
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acifluorfen Sodium
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.040 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: No
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Reverse Lockout Meets NHRA And IHRA Requirements
- Carbon Fiber Look Without The Cost
- Reliable And Race Proven Shifter Design
- The Magnum Grip Stealth Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter and will not allow you to miss a shift by over-shifting a gear. The reverse lockout feature only requires one-hand to operate and meets both NHRA and IHRA safety regulations for racing. Other features include a neutral safety switch, backup light switch, along with a simulated carbon fiber wrapped aluminum cover. The cover is treated to a high quality hydro-dip process and material to add a high-tech and realistic carbon look to your vehicles interior, but at a substantial cost savings versus carbon fiber. This shifter includes our Magnum Grip shift handle with replaceable side grip plates, tough black anodized finish, 5-foot long Super-duty shift cable, gear indicator, cable brackets and transmission levers for use with most popular 3-speed transmissions. Comes with all necessary hardware and detailed instructions for an easy at home installation. Be sure to check out all the optional side grip Comes with all necessary parts for use with three and four-speed automatic transmissions such as 1966 and later Chrysler Torqueflite A727, A904, A500, A518, Ford C4, C5, C6, GM TH200, TH250, TH350, TH400, 2004R, 700R4, 4L60, 4L60E - 4L85E without PRNDL switch. Notes: Ford AOD transmissions require installation kit #40496, AODE and 4R70W require installation kit #40504, E40D and 4R100 require installation kit #40505 and GM 4L60E - 4L85E transmissions with PRNDL switch require cable bracket #70499. Overall dimensions - 10.75L x 2.9W x 12H
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1972 - Chevrolet Biscayne | Automatic | 3 | THM350 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 20
- 508
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.75
- 44
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10-19033, 1031, 11531719925, 1164596, 1220-13, 1220S, 1244106, 129, 1318, 155467, 17021653, 23275, 2372481, 2372482, 2454481, 2493589, 25530, 2907353...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | V | - | Lower | GAS | 8 Cyl 7.4L | 454 |
- W/O A.C.
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 20
- 508
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.75
- 44
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | L | 4098 | Lower | GAS | 6 Cyl 4.1L | 250 |
- Monro-Matic Plus Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12322219, 1440005, 22003121, 22003254, 22046423, 22046424, 22046426, 22046427, 22046428, 22046445, 22046455, 22046456, 22046498, 22063940, 22063941, 22064006, 22064007, 22064040...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Chevrolet Biscayne | Front |
- Tall Style; w/Perimeter Bolts
- Aluminum Valve Cover; Tall Style; w/Perimeter Bolts;
- Aluminum Valve Cover
- Product Attributes:
- Valve Cover Style: Tall
- WARNING CA Proposition 65: No
- Cylinder Head Type: Standard
- Engine Make/Size: Chevy Small Block (262-400)
-
Features:
- Cast Aluminum Construction
- Smooth Polished Finish
- One Hole Each Side
- High quality valve covers that help you solve rocker clearance issues. Great for when you just cant seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Biscayne | V | - | 8 Cyl 6.6L | 400 |
Showing 1 - 10 of 16 products
Loading...