Shop By Product Matching "DBS"
Choose your Engine for your 1974 Ford Country Sedan
Image
Product
Price
- Except WER Axle
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Female Thread - Sae
- Gasket Or Seal Included: No
- Fitting Type, End 1: Female Thread - Sae
- Hose Length, Overall: 10.700
This Part Fits the Following OEM/Substitute Numbers:
150.61303, 176-426, 22.3909, 5636633, 73316, 87-34303, 88523, BH402200, BH73316, D1AZ22822, D1AZ2282A, D6AZ2282B, F73316, H-73316, H71363, H73316, HB81303, SP4870...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Country Sedan | Rear Center |
- Standard Design with 8.5 (in) Ring Gear
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-4118, 12471606, 1563TAV, 1563TS, 1563TS18, 1F70-26-151, 1L24-38A79-AA1L2, 1L24-3A379AA, 1L2Z-3A379AA, 2800459, 2852949, 38-01904, 3868746, 3W1W-1225AA, 3W1Z-1225AA, 41364000, 4202590, 460673...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Country Sedan | Rear |
- Standard Design with 8.7 (in) Ring Gear
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Country Sedan | Rear |
- Standard; 157 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Ratio; 4.5:1 Gear Reduction; 3/4in. Offset
- Ultra Torque Starter; Standard; 157 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Ratio; 4.5:1 Gear Reduction; 3/4in. Offset;
- Ultra Torque Starter
-
Features:
- 2.5 KW/3.4 HP
- Up to 18:1 Compression
- Cranking Power For Over 18:1 Compression
- Can Be Inverted w/Solenoid Down
- 5 Position Rotation
- Great for Big Cubic Inch Engines
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 5 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | 5753 | 8 Cyl 5.8L | Windsor | 351 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 20
- 508
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.75
- 44
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10-19033, 1031, 11531719925, 1164596, 1220-13, 1220S, 1244106, 129, 1318, 155467, 17021653, 23275, 2372481, 2372482, 2454481, 2493589, 25530, 2907353...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | - | Lower | GAS | 8 Cyl 7.5L | 460 |
- Greaseable Premium Universal Joint
- with 3-7/8 (in) Outside Diameter Yoke Span Greasable Premium with Lube Fitting in Body with Steel Driveshaft & Steel Driveshaft Yoke
- MOOG 354 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.625
- 92.075
- Length Axis 2:
- 3.625
- 92.075
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
043710K080, 043750C020, 043750C030, 043750C040, 043750C041, 043750C042, 114-213, 114-530, 114213, 114530, 12473124, 12545626, 15576468, 15580369, 15582093, 2-4800, 20051, 20064...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1974 - Ford Country Sedan | At Transmission |
- W/Police Pkg.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 34.84
- 885
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 34
- 864
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0029974992, 0049979892, 0114596, 0119791, 023145271, 023145271B, 027903137A, 03-02-719-8, 030768, 039289, 0403341, 049903137, 054903137, 054903157, 06346, 074145271J, 0950863, 10-01866...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | - | Alternator | GAS | 8 Cyl 7.5L | 460 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | 7539 | Canada | 8 Cyl 7.5L | 460 |
- Autolite 26 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.822
- 20.88
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 7
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.47
- 62.74
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
05614229, 19, 19157995, 19302742, 19302744, 22231, 22251, 22431, 251, 276, 41-905, 45TS, 46TS, 5020, 5613738, 5613956, 5613957, 5614229...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | - | 8 Cyl 7.5L | 460 |
- FRAM, HP1, Oil Filter
- High Performance Spin-on Oil Filter
- FRAM HIGH PERFORMANCE
- Product Attributes:
- Gasket Inside Diameter: 2.460
- Non Slip Grip: No
- Gasket Thickness: 0.0354
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Grade: Advanced
- Gasket Outside Diameter: 2.814
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Low-restriction synthetic blend racing media designed for high oil flow. The media features 94% efficiency @20 microns for excellent engine protection**
- Silicone anti-drain back valve.
- Recommended maximum oil flow: 10-18gpm, depending on model***
- Maximum burst pressure: 350-500psi, depending on model***
- Maximum operating pressure: 200psi on all models***
- Compatible with all oil types, this filter is optimized for racing and high-performance street cars
- FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
This Part Fits the Following OEM/Substitute Numbers:
041-8144, 105000603000, 15590, 185515, 3120MP, 33120, 3609251, 3690251, 85622, 86120MP, 92622, B2-HPG, B252, B253, BF7613, BF992, BT8328, BT8434...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Country Sedan | V | 7539 | 8 Cyl 7.5L | 460 |
Showing 1 - 10 of 11 products
Loading...