Image
Product
Price
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Ford Bronco |
- Transmission Cooling Pan; Reduces Fluid Temps up to 50deg.F; Increase Capacity
- 6-1/8 in. Pan Depth; 4-1/4 in. Tube Depth; 1/8 NPT Temp Bung Size
- Transmission Cooling Pan (Ford E4OD/4R100/5R110)
- Transmission Cooling Pan
- Product Attributes:
- Trans Model:
- Ford- 4r100 (auto) 4 Speed
- Ford- 5r110 (auto) 5 Speed
- Ford- E4od (auto) 4 Speed
- Trans Model:
-
Features:
- Heavy Gauge Stamped Steel Construction
- Two Stage Heat Dissipating Black Finish
- 1/8 in. NPT Temperature Sender Port
- Reduces Fluid Temperatures Up To 50 Degrees Fahrenheit
- Increases Fluid Capacity By 8 qts. 10 oz.
- Patented Turbulator Cooling Tubes Add Heat Transfer Capability
- Magnetic Drain Plug With Increased Magnetic Strength And Rubber/Steel Washer
- 6-1/8 in. Pan Depth
- Derale's Transmission Cooling Pan #14208 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. Designed for Ford's E4OD, 4R100 and later 5R110 & 5R110W heavy duty transmissions, this pan features brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8 in. NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8 in. NPT temperature sender plug.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1996 - Ford Bronco | Eddie Bauer |
- 15 Row Atomic Cool Plate/Fin Remote Transmission Cooler Kit;-6AN
- Plate And Fin Cooler Style; 12-3/4 in. Width; 11-5/8 in. x 4 in. Mounting; 9-3/8 in. Height; 4-5/16 in. Depth; 8 in. Fan Size
- Atomic-Cool Transmission Cooler Kit (-6AN)
- Atomic Cool Remote Transmission Cooler Kit
-
Features:
- Mounts Anywhere Space Permits
- Electric Fan Supplies Optimum Airflow
- Dramatically Extends Engine And Transmission Life
- High Efficiency OEM Style Plate And Fin Cooler
- Clear Anodized Aluminum Shroud
- 500 CFM Reversible Tornado Electric Fan
- -6AN Inlet Size
- Transmission Cooler Kit Includes Fan Mounted Cooler
- Includes Two -6AN Barbed Hose Fittings
- Includes 180 Degrees Fahrenheit In-Line Thermostat
- Includes 5/16 in. and 3/8 in. Compression Fittings And Hardware
- A step up from Tube & Fin type coolers, the Atomic-Cool Remote Transcooler can literally be mounted almost anywhere, making it a popular addition for performance cars, hot rods, muscle cars and trucks. A heavy duty plate and fin cooler coupled with a Tornado fan and aluminum brackets, this kit comes with a complete installation kit to install easily on all vehicles with 5/16 in. or 3/8 in. transmission cooler lines. Also included is an 180°F in-line thermostat for activating the electric fan. The Atomic-Cool is designed for heavy duty towing and hauling, and can add years to the life of your transmission.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Ford Bronco |
- 14in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 22/16.2 Amp Draw High/Low; 14-1/2 in. Width; 14-1/2 in. Height; 2-5/8 in. Depth; 8-3/4 in. x 13-1/4 in. Mounting; Single
- 14in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 14.000 In.
-
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 300 Watt Motor
- 2100 CFM On High Speed/1500 CFM On Low Speed
- A very popular primary cooling fan, this 14 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2100 CFM while drawing up to 22 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Ford Bronco |
- 19 Row Series 10000 Stack Plate Transmission Cooler Kit;-6AN
- Stack Plate Style; Aluminum; 13 in. Width; 12-1/4 in. x 2-7/8 in. Mounting; 7-5/16 in. Height; 2 in. Depth; 10 in. Inlet Dim
- 19-Row Stack Plate Transmission Cooler Kit (-6AN)
- Series 10000 Stack Plate Transmission Cooler Kit
-
Features:
- Most Efficient Heat Exchangers Available
- Furnace Brazed Aluminum Construction w/4 Mounting Brackets
- 19 Row Cooler Design
- Includes Male -6AN Aluminum O-Ring Inlet Fittings
- Includes 3/8 in. Hose Barb Adapters
- Includes Complete Hardware Kit
- With our top of the line 19 Row Stack Plate cooler, -6AN aluminum fittings and hose barb adapters, this highly efficient kit extends transmission life by preventing heat-related transmission failures while also improving shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Ford Bronco |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Ford Bronco |
Showing 1 - 6 of 6 products
Loading...