Image
Product
Price
- Camshaft Bridge Cover
- Product Attributes:
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Mounting Hardware Included:
- No
- Non
- Color:
- Gris Metálico
- Metallic Gray
- Mounting Hole Diameter: 7.5
- Intake & Exhaust Camshaft Bore Diameter: 24 Mm
- Contenidos del paquete: 1 Puente Del árbol De Levas Del Motor
- Diámetro del orificio del árbol de levas de admisión y escape: 24mm
- Depth: 2
- Material:
- Aluminio
- Aluminum
- Gasket Or Seal Included:
-
Features:
- Better fix - this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants
- Upgraded materials - the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory's multi-piece plastic design
- Fully tested - in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
- Ensures performance - engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures
- On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design's plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter - small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations.
This Part Fits the Following OEM/Substitute Numbers:
06H103144F, 06H103144G, 06H103144H, 06H103144J, 06H103144K
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | CAEB | 4 Cyl 2.0L | 121 |
- Wheel Bearing Assembly - Front, Rear
- Repair Kit
- Product Attributes:
- Snap Rings Included:
- No
- Non
- Bearing Shape:
- Cilíndrico
- Cylindrical
- Bolt Circle Diameter: 126 Mm
- Anillo de retención incluido: No
- Brida de rueda incluida: No
- Spline Quantity: 0
- Hub Included:
- No
- Non
- Hub Material:
- Acero
- Steel
- Inside Diameter: 62
- Anti Lock Braking System:
- No
- Non
- Bearing Generation: Gen 2
- Drive Type:
- Driven
- Impulsado
- Flange Bolts Included:
- No
- Non
- Wheel Flange Included:
- No
- Non
- Wheel Studs Included:
- No
- Non
- Bearing Material:
- Acero
- Steel
- Contenidos del paquete: 1 Rodamiento De Rueda
- Bearing Type:
- Ball
- Rótula
- Snap Rings Included:
-
Features:
- Direct replacement - this wheel bearing is designed to match the fit and function of the original part on specified vehicles
- Restores functionality - this bearing is made to fit and fully restore part functionality after the original bearing fails
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This wheel bearing is designed to match the fit and function of the original part on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
4H0498625F, 512574, 513301, BR930817, H513301, WA512574, WE60683
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Audi A6 | Front |
- Fuel Pressure Sensor
- Product Attributes:
- Color/Finish:
- Black
- Negro
- Noir
- Sensor Type:
- Fuel Pressure
- Presión Del Combustible
- Connector Gender:
- Macho
- Male
- Mounting Hardware Included:
- No
- Non
- Maximum Pressure Reading: 100
- Terminal Type:
- Aspa
- Blade
- Thread Diameter: 0.39
- Contenidos del paquete: 1 Sensor De Presión Del Combustible
- Connector Shape: Ovalado
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 3
- Color/Finish:
-
Features:
- Direct replacement - this fuel pressure sensor is designed to match the fit and function of the original sensor on specified vehicle
- Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This fuel pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
06E906051E, 06E906051J, 06E906051K, 06F127505N, 2260014, 5S16103, FPS15, FPS515
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Audi A6 | V | 2773 | At Fuel Pump | 6 Cyl 2.8L | - |
- Turbocharger Recirculation Valve
- Product Attributes:
- Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Color:
- Black
- Negro
- Noir
- Mounting Hole Diameter: 0.25
- Contenidos del paquete: 1 Válvula De Desviación Del Turbocargador
- Mounting Hole Quantity: 3
- Material:
- Plastic
- Plástico
- Port Quantity:
-
Features:
- Direct replacement - this turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality - reliable replacement for an original valve that has failed due to a cracked diaphragm
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
06F145710B, 06F145710C, 06F145710G, 06F201282, 06F201282B, 06H145710C, 06H145710D, 06H145710J, 7D1160, DV183, DV185, EC6064, G62001, SK911240, TBV1013
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | 4 Cyl 2.0L | 121 |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conexión Lateral
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
102-7515, 1526012, 1CB10213, 2606374, 2607738, 2607742, 6CB70110, 8K0407510A, 8K0407510B, 8K0407510J, 8K0407510M, 8K0407510N, 8K0407510R, CA1475B, CB10213, CB12058, CB12078, CB12098...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Audi A6 | Front Right Upper Rearward |
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
- Daytime Running Lights Control Module - Led
- w/LED Lights
- Product Attributes:
- Electronic Component Replacement Type: Complete Control Module
- Connector Gender:
- Macho
- Male
- Mounting Position:
- En La Luz Delantera
- In-headlamp
- Wire Gauge Measurement: 0
- Wiring Harness Length: 0
- Body Width: 3
- Water Resistant:
- No
- Non
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Installation Hardware Included:
- No
- Non
- Terminal Quantity: 18
- Body Material:
- Aluminio Fundido
- Cast Aluminum
- Goma
- Rubber
- Body Thickness: 1.25
- Wiring Harness Included:
- No
- Non
- Terminal Type:
- Clavija
- Pin
- Body Length: 3.5
- Contenidos del paquete: 1 Lastre Hid
- Tipo de reemplazo del componente eléctrico: Módulo De Control Completo
- Body Color:
- Black
- Negro
- Plata
- Silver
- Wire Quantity: 0
-
Features:
- Direct replacement - this high-intensity discharge lighting ballast is made to match the fit and performance of the original HID ballast on specific vehicle applications
- Restores functionality - reliable replacement for an original part that has failed due to a voltage surge in electrical system
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This high-intensity discharge lighting ballast is designed to match the fit and performance of the original HID ballast and restore proper headlight function on specified vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4G0907397F, 4G0907697F
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
- M14-1.50 Wheel Bolt - 17mm Hex, 26mm Thread Length
- 1 Piece Bolt Packaging Type: Box Package Quantity: 10
- Product Attributes:
- Estilo del asiento: Rótula
- SAE or Metric:
- Metric
- Métrico
- Thread Pitch:
- 1,5mm
- 1.5 Mm
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Bolt Grade: Grade 8
- Hex Size:
- 17 Mm
- 17mm
- Color:
- Black
- Negro
- Noir
- Thread Diameter: 14
- Contenidos del paquete: 10 Lengüetas De Perno
- Seat Style: Ball
- Longitud total: 48.2 Mm
- Flange Diameter: 23
- Material:
- Acero
- Steel
-
Features:
- Ideal replacement - this wheel lug bolt is a direct replacement for the original hardware
- Durable construction - made of quality materials for safe, reliable service
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life
- This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
This Part Fits the Following OEM/Substitute Numbers:
27804B, 431601139, 431601139A, 431601139C, 443601139A, 443601139D, 447601139B, 477601139, 477601139B, 561-133, 610-318B, 803601139, 803601139C, 8D0601139D, 97235, B142290, BD60999, RB27804B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Audi A6 | Front |
- M14-1.50 Wheel Bolt - 17mm Hex, 26mm Thread Length
- 1 Piece Bolt Packaging Type: Box Package Quantity: 10
- Product Attributes:
- Estilo del asiento: Rótula
- SAE or Metric:
- Metric
- Métrico
- Thread Pitch:
- 1,5mm
- 1.5 Mm
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Bolt Grade: Grade 8
- Hex Size:
- 17 Mm
- 17mm
- Color:
- Black
- Negro
- Noir
- Thread Diameter: 14
- Contenidos del paquete: 10 Lengüetas De Perno
- Seat Style: Ball
- Longitud total: 48.2 Mm
- Flange Diameter: 23
- Material:
- Acero
- Steel
-
Features:
- Ideal replacement - this wheel lug bolt is a direct replacement for the original hardware
- Durable construction - made of quality materials for safe, reliable service
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life
- This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Audi A6 | Rear |
Showing 1 - 10 of 19 products
Loading...