Image
Product
Price
- Camshaft Bridge Cover
- Product Attributes:
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Mounting Hardware Included:
- No
- Non
- Color:
- Gris Metálico
- Metallic Gray
- Mounting Hole Diameter: 7.5
- Intake & Exhaust Camshaft Bore Diameter: 24 Mm
- Contenidos del paquete: 1 Puente Del árbol De Levas Del Motor
- Diámetro del orificio del árbol de levas de admisión y escape: 24mm
- Depth: 2
- Material:
- Aluminio
- Aluminum
- Gasket Or Seal Included:
-
Features:
- Better fix - this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants
- Upgraded materials - the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory's multi-piece plastic design
- Fully tested - in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
- Ensures performance - engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures
- On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design's plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter - small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations.
This Part Fits the Following OEM/Substitute Numbers:
06H103144F, 06H103144G, 06H103144H, 06H103144J, 06H103144K
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | CCTA | 4 Cyl 2.0L | 121 |
- Engine Intercooler
- Product Attributes:
- Inlet Tank Material:
- Aluminio
- Aluminum
- Grade Type:
- Performance
- Rendimiento
- Mounting Hardware Included:
- No
- Non
- Inlet Fitting Gender:
- Macho
- Male
- Outlet Outside Diameter: 15.98
- Core Thickness: 55.25
- Fold Away Mechanism:
- No
- Non
- Color:
- Plateado
- Silver
- Core Color:
- Plateado
- Silver
- Core Material:
- Aluminio
- Aluminum
- Contenidos del paquete: 1 Interenfriador
- Outlet Fitting Gender:
- Macho
- Male
- Core Height: 4
- Inlet Outside Diameter: 16.15
- Type:
- Air Intercooler
- Interenfriador De Aire
- Inlet Tank Material:
-
Features:
- Ideal replacement - this intercooler matches the fit, function and performance of the original equipment intercooler
- Durable construction - this intercooler is made from corrosion-resistant aluminum
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance
- This intercooler is a direct replacement for an original equipment intercooler that has failed from oil contamination or leaks. This part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance.
This Part Fits the Following OEM/Substitute Numbers:
04E145749B, 04E145749F, 04E145749K, 2711382, 96318, V15600004, V15606077
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1395 | 4 Cyl 1.4L | Turbocharged | 85 |
- Engine Intake Manifold
- Product Attributes:
- Deck Height: 3.34
- Elevador alto: No
- Preparado para EGR: Sí
- CNC Ported:
- No
- Non
- Grade Type:
- Equipo Original
- Oem
- Installation Instructions Included:
- No
- Non
- Manifold Height (in): 3.34
- Montaje del compresor de aire acondicionado: No
- Center Maximum Height: 3.34
- Rear Maximum Height: 3.34
- Dimensiones del puerto de salida: 2.72 In.
- Single Or Dual Plane Type:
- Plano Simple
- Single Plane
- Color:
- Black
- Negro
- Noir
- Port Outlet Dimensions:
- 2.72 In
- 2.72 In.
- Heated Choke Port:
- No
- Non
- Material:
- Plastic
- Plástico
- Air Conditioning Compressor Mount:
- No
- Non
- Mounting Hole Diameter: 0.12
- Alternator Mount:
- No
- Non
- Mounting Hole Quantity: 16
- EGR Ready:
- Oui
- Yes
- Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- High-Riser:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Contenidos del paquete: 1múltiple De Admisión
- Front Maximum Height: 7.5
- Street Legal:
- Oui
- Sí
- Yes
-
Features:
- Stronger design - this Dorman OE FIX manifold features a durable cast aluminum arm to eliminate rough running and P2015 codes on specified Volkswagen and Audi vehicles
- Smarter solution - this intake manifold contains the gaskets and upgraded parts for a complete and long-lasting repair, but allows reuse of OEM components known for their durability
- Reliable construction - tested to help ensure identical performance and durability to the OEM unit
- Trustworthy design - built by the industry leader in aftermarket manifolds
- Certain Volkswagen and Audi vehicles are fitted with an intake manifold runner system that's prone to failure. A vacuum diaphragm opens the runner flaps by way of a plastic linkage that connects the flap arm to the diaphragm. The linkage often breaks due to thermal damage, carbon obstruction in the path of the runner flaps and the strong spring which normally holds the flaps in the closed position. The result is often rough running and a P2015 DTC. This OE FIX manifold is designed to replace the original unit, but features a linkage made of durable cast aluminum for years of long service. To reduce unnecessary expense, the IMRC sensor is not included - the factory sensor can almost always be reused. Gaskets for both the upstream and downstream ends of the manifold are included for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
06J 133 201BH, 06J133201BH, V103954
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | 4 Cyl 2.0L | 121 |
- Timing Cover Kit
- Product Attributes:
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 0.125
- Mounting Hole Quantity: 6
- Finish:
- Painted
- Pintado
- Width (in): 10.2
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Material Thickness: 0.15
- Contenidos del paquete:
- 1 Cubierta Del Tiempo Del Motor
- Herrajes De Montaje
- Juntas
- Depth: 2
- Material:
- Plastic
- Plástico
- Grade Type:
-
Features:
- Direct replacement - this engine timing cover matches the fit and function of the original equipment cover
- Durable construction - this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
This Part Fits the Following OEM/Substitute Numbers:
06K103269D, 06K103269F, 06L103269E, TCV0137, V103937
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | Upper | 4 Cyl 2.0L | 121 |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.2
- Mounting Hole Quantity: 4
- Articulación de rótula instalada: Sí
- Ball Joint Stud Length: 21.1
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Aluminio
- Aluminum
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 360.5
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Mounting Type:
- Cono
- Taper
- Contenidos del paquete:
- 1 Brazo De Suspensión
- 1 Rótula
- 1 Tuerca
- Control Arm Color:
- Plateado
- Silver
- Control Arm Maximum Width: 310
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
2608431, 3C0407151H, 5CB70170, CMS701142, NI, TC2161
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Audi Q3 | Front Right Lower |
- Turbocharger Recirculation Valve
- Product Attributes:
- Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Color:
- Black
- Negro
- Noir
- Mounting Hole Diameter: 0.25
- Contenidos del paquete: 1 Válvula De Desviación Del Turbocargador
- Mounting Hole Quantity: 3
- Material:
- Plastic
- Plástico
- Port Quantity:
-
Features:
- Direct replacement - this turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality - reliable replacement for an original valve that has failed due to a cracked diaphragm
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
06F145710B, 06F145710C, 06F145710G, 06F201282, 06F201282B, 06H145710C, 06H145710D, 06H145710J, 7D1160, DV183, DV185, EC6064, G62001, SK911240, TBV1013
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | 4 Cyl 2.0L | 121 |
- Pressurized Coolant Reservoir
- Product Attributes:
- Capacity:
- 0,8 L
- 0.8 L
- Grade Type:
- Equipo Original
- Oem
- Mounting Hardware Included:
- No
- Non
- Mounting Point Quantity: 2
- Mounting Hole Quantity: 2
- Cap Maximum Pressure Rating: 20
- Cap Included:
- Oui
- Sí
- Yes
- Shape:
- Redondo
- Round
- Color:
- Claro
- Clear
- Transparent
- Mounting Brackets Included:
- Oui
- Sí
- Yes
- Maximum Capacity: 1.8
- Pressurized:
- Oui
- Sí
- Yes
- Cap Type:
- Spring Loaded Twist
- Torsión Accionada Por Resorte
- Contenidos del paquete:
- 1 Depósito De Anticongelante
- 1 Sensor
- 1 Tapa
- Working Capacity:
- 0,8 L
- 0.8 L
- Level Sensor Included:
- Oui
- Sí
- Yes
- Material:
- Plastic
- Plástico
- Capacity:
-
Features:
- Direct replacement - this engine coolant reservoir matches the fit and function of the original part
- Ideal solution - engineered for a seamless installation
- Durable construction - manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design - backed by 100 years of automotive aftermarket experience
- This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
This Part Fits the Following OEM/Substitute Numbers:
1K0121407A, 1K0121407F, 21407K, 21407K-T, 603253, 996116, CRT19000S, DAKG-21407K, EPK0030, EPT0030, FRT1513C, SK603253, URO-010686, V100433, VW3014103, VW3014104
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | Front | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Audi Q3 |
- Turbocharger Oil Feed Line
- Product Attributes:
- End 2 Fitting Gender:
- Macho
- Male
- Outlet Fitting Type:
- Macho
- Male
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Gender:
- Female
- Hembra
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- No
- Non
- Color:
- Gris Metálico
- Metallic Gray
- Configuration:
- One Piece
- Una Pieza
- Contenidos del paquete: 1 Línea Del Aceite Del Turbocargador
- Inlet Fitting Type:
- Female
- Hembra
- Material:
- Aluminio
- Aluminum
- End 2 Fitting Gender:
-
Features:
- Direct replacement - this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
06J145778G, 06J145778H, 1067, TFP0326, TL143, TO92363
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | Supply (Upper) | GAS | 4 Cyl 2.0L | Turbocharged | 121 |
- Engine Oil Pan
- w/Oil Level Sensor
- Product Attributes:
- Engine Oil Cooler Return Fitting:
- No
- Non
- Maximum Depth: 2.7
- Sump Location:
- Avant
- Delantero
- Front
- Drain Thread Size: M14x1.5
- Installation Hardware Included:
- No
- Non
- Baffled:
- No
- Non
- Windage Tray Included:
- No
- Non
- Dipstick Port:
- No
- Non
- Gasket Or Seal Included:
- No
- Non
- Sump Type:
- Húmedo
- Wet
- Maximum Width: 11.61
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Cárter De Aceite
- Crank Shaft Wiper Included:
- No
- Non
- Kick Out Type Pan:
- No
- Non
- Drain Plug Included:
- Oui
- Sí
- Yes
- Pickup Included:
- No
- Non
- Material:
- Acero
- Steel
- Engine Oil Cooler Return Fitting:
-
Features:
- Direct replacement - this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly - includes replacement pan and drain plugs to match original components
- Durable design - high-strength coating prevents future corrosion
- Trustworthy value - backed by team of engineers and quality control experts in the United States
- Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
This Part Fits the Following OEM/Substitute Numbers:
03G103707, 06J103600AF, 06J103600AM, 06J103600E, 06J103600G, 06J103600T, 06K103601, 06K103603DD, 103311, 3310091, 3312469904732343, KVWP8A, SK264713, URO-009416, VWP24A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Region | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Audi Q3 | L | 1984 | Lower | CCTA | Canada | 4 Cyl 2.0L | 121 |
Showing 1 - 10 of 24 products
Loading...