Image
Product
Price
- TPMS Aluminum Clamp-In Valve Stem For Dorman DiRECT-FIT Sensor
- Fits only Dorman DIRECT-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Reemplazo Del Vástago De La Válvula De Sujeción Tpms De Los Sensores Dorman
- Material:
- Aluminio Anodizado
- Anodized Aluminum
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
- TPMS Rubber Snap-In Stem for Dorman DiRECT-FIT or MULTi-FIT Sensor
- Fits only Dorman DIRECT-FIT or Dorman Programmable Universal MULTI-FIT TPMS Sensors Replacement Snap-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Juego De Válvulas De Sujeción A Presión Que Funciona Con Todos Los Sensores Dorman Tpms
- Material:
- Caucho
- Élastomère
- Rubber
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
- Ti-Blue Open End Knurled Wheel Nuts
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: Custom Performance Thread Direction: Clockwise (Right) Package Quantity: 20 Packaging Type: Clamshell Thread Type: Fine Carbon Steel Thread Size: M14-1.50 Overall Length: 48 mm Color: Ti-Blue Chrome Wheel Nut Style: Bulge Seat Open End Width: 22 mm
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Custom Performance
- Rendimiento Personalizado
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Bulge Seat Open End
- Hex Size: 17 Mm
- Diseño de extremo abierto: Sí
- Color:
- Cromo Ti-blue
- Ti-blue Chrome
- Estilo de la tuerca de la rueda: Base Saliente Extremo Abierto
- Shank Included:
- No
- Non
- Thread Diameter: 14
- Contenidos del paquete: 20 Tuercas De Ruedas
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- Oui
- Yes
- Depth: 48
- Material:
- Acero Al Carbono
- Carbon Steel
-
Features:
- Exclusive design - these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip
- Quality materials - made of tough steel for durability and positive tool contact
- Cost-effective solution - offers the high-performance look of titanium racing hardware at a competitive price
- Quality tested - these lug nuts have undergone try-on, corrosion and material testing to ensure a quality fit and long service life
- Upgrade the look of your wheel hardware with these racing-inspired lug nuts. Designed with an open end to accommodate long studs, these nuts are finished with a knurled texture for better grip when spinning them by hand.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
- Wheel Nut M14-1.50 Metric- 21mm Hex, 44.5mm Length
- Aluminum Wheels Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Carbon Steel Thread Size: M14-1.50 Overall Length: 44.5 mm Color: Gray Wheel Nut Style: Dometop Capped Nut Width: 31 mm
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- Threads Per Inch: 16.93
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 21 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Shank Included:
- No
- Non
- Thread Diameter: 14
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Depth: 41
- Material:
- Acero Al Carbono
- Carbon Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
ACPZ1012B
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
- Wheel Nut M14-1.50 Metric - 21 mm Hex, 44.5 mm Length
- Aluminum Wheels Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 6 Packaging Type: Card Thread Type: Fine Carbon Steel Thread Size: M14-1.50 Overall Length: 44.5 mm Color: Gray Wheel Nut Style: Dometop Capped Nut Width: 31 mm
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- Threads Per Inch: 16.93
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 21 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Shank Included:
- No
- Non
- Thread Diameter: 14
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Depth: 41
- Material:
- Acero Al Carbono
- Carbon Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
ACPZ1012B
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
- 4WD Vacuum Reservoir
- 4WD Vacuum
- Product Attributes:
- Color/Finish:
- Black
- Negro
- Noir
- Inside Diameter: 2.3
- Connector Gender:
- Macho
- Male
- Hose Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Mounting Hardware Included:
- No
- Non
- Vacuum Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Vacuum Port Diameter: 5
- Contenidos del paquete: 1 Canasta De Almacenamiento De Vacío
- Material:
- Plastic
- Plástico
- Color/Finish:
-
Features:
- Direct replacement - this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
- Ideal solution - this reservoir is a reliable replacement for an original part that is missing or damaged
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
AL3Z19A566A
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2018 - Ford Lobo | 4WD |
- Hub And Bearing Mounting Bolts
- Knuckle to Hub Package Quantity: 1
- Product Attributes:
- Bolt Grade: 10.9
- Hex Size: 18 Mm
- Thread Type:
- Fine
- Fino
- Thread Diameter: 0.562
- Contenidos del paquete: 4 Pernos
- Material:
- Acero Al Carbono
- Carbon Steel
-
Features:
- Direct replacement - the single-use torque-to-yield bolts in this kit directly replace the original single-use bolts on certain vehicle years, makes, and models
- Ideal solution - made of durable materials to reliably replace bolts with rounded-off or damaged threads
- Position-specific design - precision-made to securely mount the hub assembly to the rear wheels on certain vehicles
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Single-use bolts must be replaced during brake service on certain vehicles to prevent the wheel from separating from the hub. The set of hub and bearing mounting bolts includes everything you need, with bolts that match the factory design, stretching when torqued to provide precise clamping force.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
W706890S439
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford Lobo | Front |
- Lower Steering Shaft
- Product Attributes:
- Universal Joint Quantity: 2
- End 2 Type:
- Internal Profile
- Perfil Interno
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete:
- 1 Eje De La Columna De La Dirección
- 2 Pernos
- End 1 Type:
- External Profile
- Internal Profile
- Perfil Interno, Perfil Externo
- Installation Instructions Included:
- No
- Non
- Spline Quantity: 0
- Material:
- Acero
- Steel
- Finish:
- Mate
- Matte
- Universal Joints Included:
- Oui
- Sí
- Yes
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
FL3Z3B676A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford Lobo | Lower |
- Exhaust Manifold Kit
- Product Attributes:
- Collector Port Diameter: 2.6
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- No
- Non
- Tube Wall Thickness: 0.125
- Port Shape:
- Redondo
- Round
- Mounting Hole Quantity: 7
- Heat Shield Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Color:
- Cast Iron
- Hierro Fundido
- Oxygen Sensor Port:
- No
- Non
- Contenidos del paquete:
- 1 Junta
- 1 Múltiple De Escape
- Material:
- Cast Iron
- Hierro Fundido
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
JL3Z9430C
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Ford Lobo | V | 3496 | Right | 6 Cyl 3.5L | 213 |
- TPMS Aluminum Clamp-In Valve Stem For Dorman MULTi-FIT Sensor
- Fits only Dorman Programmable Universal MULTI-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Juego De Válvulas De Sujeción Para Grampar De Repuesto Para Sensor Dorman Multi-fit
- Material:
- Aluminio Anodizado
- Anodized Aluminum
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford Lobo |
Showing 1 - 10 of 46 products
Loading...