Shop By Product Matching "Dorman"
Image
Product
Price
- Wheel Nut M14-1.50 Capped - 22 Mm Hex, 38.5 Mm Length
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M14-1.50 Overall Length: 1.512 in Color: Gray Wheel Nut Style: Dometop Capped Nut
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 22 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Thread Diameter: 14
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Material:
- Acero
- Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
6509422AA
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Grand Wagoneer |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Greaseable:
- No
- Non
- Control Arm Material:
- Aluminio
- Aluminum
- Control Arm Construction:
- Casting/forged
- Fundición/forjado
- Ball Joint Stud Type:
- Roscado
- Threaded
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Ball Joint Mounting Type:
- Presionar Hacia Adentro
- Press In
- Control Arm Color:
- Plateado
- Silver
- Control Arm Maximum Width: 519
- Ball Joint Installed:
- Oui
- Yes
- Control Arm Type: Casting/forged
- Bushing Inside Diameter:
- 16.2
- 18.2
- Mounting Hole Diameter:
- 16.2
- 18.2
- Mounting Hole Quantity: 3
- Ball Joint Stud Length: 45.5
- Bushing Length:
- 70
- 95
- Control Arm Maximum Length: 427.5
- Grease Fitting Included:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 16
- Contenidos del paquete:
- 1 Brazo De Suspensión
- 1 Rótula
- 1 Tuerca
- Distance Between Bushings: 519
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
11CB252265, 2608733, 68261621AA, 68261621AB, 68261621AC, 68261621AD, 68261621AE, 68401457AB, 68401457AC, CMS251269, CTXMS251269, GS251269
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Jeep Grand Wagoneer | Front Left Lower |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Greaseable:
- No
- Non
- Control Arm Material:
- Aluminio
- Aluminum
- Control Arm Construction:
- Casting/forged
- Fundición/forjado
- Ball Joint Stud Type:
- Roscado
- Threaded
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Ball Joint Mounting Type:
- Presionar Hacia Adentro
- Press In
- Control Arm Color:
- Plateado
- Silver
- Control Arm Maximum Width: 519
- Ball Joint Installed:
- Oui
- Yes
- Control Arm Type: Casting/forged
- Bushing Inside Diameter:
- 16.2
- 18.2
- Mounting Hole Diameter:
- 16.2
- 18.2
- Mounting Hole Quantity: 3
- Ball Joint Stud Length: 45.5
- Bushing Length:
- 70
- 95
- Control Arm Maximum Length: 427.5
- Grease Fitting Included:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 16
- Contenidos del paquete:
- 1 Brazo De Suspensión
- 1 Rótula
- 1 Tuerca
- Distance Between Bushings: 519
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
11CB252266, 2608734, 68261620AA, 68261620AB, 68261620AC, 68261620AD, 68261620AE, 68401456AB, 68401456AC, CMS251270, CTXMS251270, GS251270, TC4006
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Jeep Grand Wagoneer | Front Right Lower |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Jeep Grand Wagoneer | L | 2993 | 6 Cyl 3.0L | 183 |
- Oil And Coolant Temperature Sensor
- Product Attributes:
- Connector Gender:
- Macho
- Male
- Color:
- Gray
- Gris
- Wiring Harness Included:
- No
- Non
- Resistance: 10.7
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Sensor De Temp. Del Refrigerante Del Motor
- Connector Shape:
- Cuadrado
- Square
- Terminal Quantity: 2
- Threaded End Diameter: 0.675
- Connector Gender:
-
Features:
- Direct replacement - this engine coolant temperature sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine coolant temperature sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
5149077AB, 5149096AB, 5S12397, TS5805, TX195, WT5205
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Jeep Grand Wagoneer | L | 2993 | 6 Cyl 3.0L | 183 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 13Mm
- 13 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 3
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 13 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
1013938, 1040, 1054, 1066, 11970pk, 323528, 6506214AA, 6507741AA, 6513414AA, 68094567AA, 7B0103193, 80-06, 80-26, AJ83017, AJ88461, F6TZ6730BA, LF1310404, YF091046Y...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Jeep Grand Wagoneer | L | 2993 | 6 Cyl 3.0L | 183 |
Showing 1 - 6 of 6 products
Loading...