Image
Product
Price
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T6D, 13078, 13478, 13708, 15478, 15708, 16708, 191, 206-180, 20680, 33038, 3478, 35478, 36708, 3864134, 9206180, P3478, S347180...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford F-100 | V | 3917 | 8 Cyl 3.9L | 239 |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford F-100 | L | 3655 | 6 Cyl 3.6L | 223 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1954 - Ford F-100 |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1954 - Ford F-100 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1954 - Ford F-100 |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 8.0
- Length:
- 240.0
- 9.447
- Top Tip Diameter:
- 0.5
- 13.0
- Title: Engine Push Rod
- Top Tip Type: Cup End
- Bottom Tip Diameter:
- 0.39
- 10.0
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | CID |
|---|---|---|---|---|---|
| 1954 - Ford F-100 | L | 3655 | OHV | 6 Cyl 3.6L | 223 |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 7.92
- 8.0
- Length:
- 239.95
- 240.0
- 9.447
- Top Tip Diameter:
- 0.5
- 0.500
- 12.70
- 13.0
- Title: Engine Push Rod
- Top Tip Type: Cup End
- Bottom Tip Diameter:
- 0.39
- 0.390
- 10.0
- 9.91
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
190-1222, 215-4047, 48043, B6A-6565-E, B7Q-6565-A, COAE-6565-C, EAA-6565-A, EAD-6565-C, MPR-80, PR-1222, PR-1282, PR-3021, PR-80, PR-80S, RP-3021, RP157
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | CID |
|---|---|---|---|---|---|
| 1954 - Ford F-100 | L | 3655 | OHV | 6 Cyl 3.6L | 223 |
- Thermostat-195 Degrees
- Temperature 195F Higher Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford F-100 | L | 3655 | 6 Cyl 3.6L | 223 |
- Thermostat-195 Degrees
- Temperature 195F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T6E, 13079, 13479, 13709, 1601-290206, 206-195, 20695, 291, 33039, 3479, 3479-TS, 35479, 36709, 3864135, 9206195, P3479, S347195, S370195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford F-100 | V | 3917 | 8 Cyl 3.9L | 239 |
- Thermostat-160 Degrees
- Temperature 160F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 160
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T6B, 13076, 13476, 13706, 1389275, 1391226, 15476, 15706, 1601-290205, 16706, 1672619, 1672620, 1672720, 1734957, 1737915, 206-160, 20660, 2463441...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1954 - Ford F-100 | L | 3655 | 6 Cyl 3.6L | 223 |
Showing 1 - 10 of 10 products
Loading...