Image
Product
Price
- Water Outlet Gasket
- 2-1/2in Inside Diameter; Type: Water Outlet Gasket Use: Water Outlet
- FEL-PRO 35063 Water Outlet Gasket
- Product Attributes:
- Part Dimensions: 2 1/2" Id
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1053ST, 11020, 110201, 1192735, 1343030, 1503091M1, 20963, 25140, 30963, 3128233, 3171856, 33631, 3830016, 41217, 494904, 50082, 6022, 677...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Buick Invicta | V | 6572 | 8 Cyl 6.6L | 401 |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T6D, 13078, 13478, 13708, 15478, 15708, 16708, 191, 206-180, 20680, 33038, 3478, 35478, 36708, 3864134, 9206180, P3478, S347180...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Buick Invicta | V | 6572 | 8 Cyl 6.6L | 401 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- Visual Standard Mini Lamp
- Miniature Lamp - Blister Pack
- Wagner Standard BP89 Light Bulb - Multi-Purpose (Card of 2 )
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 750
- Voltage: 13.000
- Wattage: 7.540
- Length:
- 1.438
- 37.000
- Amperage Rating: 0.580
- Brightness: 6.000
- Bulb Base Type: Single Contact Bayonet
- Bulb Type: Miniature Lamp G-6
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- FRAM, PH25, Oil Filter
- Spin-on Oil Filter If space is restricted
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 230.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Marine Approved: No
- Outside Diameter: 3.781
- Gasket Outside Diameter: 2.790
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1-43, 5557147R91, A44081, AL43, C2821A, FP361, LF400, PF1093
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- Standard Miniature Lamp
- OE Type; Miniature Lamp - Boxed
- Wagner Standard 89 Light Bulb - Multi-Purpose (Box of 10)
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 750
- Voltage: 13.000
- Wattage: 7.540
- Length:
- 1.438
- 37.000
- Amperage Rating: 0.580
- Brightness: 6.000
- Bulb Base Type: Single Contact Bayonet
- Bulb Type: Miniature Lamp G-6
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
00234-0089, 89
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
- Thermostat-195 Degrees
- Temperature 195F Higher Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.49
- Flange Thickness: 0.06 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T6E, 13079, 13479, 13709, 1601-290206, 206-195, 20695, 291, 33039, 3479, 3479-TS, 35479, 36709, 3864135, 9206195, P3479, S347195, S370195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Buick Invicta | V | 6572 | 8 Cyl 6.6L | 401 |
- Standard Rotation Thermal Heavy Duty Fan Clutch
- ; Standard Rotation Heavy Duty Thermal Fan Clutch OE Fan Clutch Height
- Standard Rotation Thermal Heavy Duty Fan Clutch
- Fan Clutch
- Product Attributes:
- Mount Dia. MM: 66
- Overall Height IN: 3.34
- Performance Rated?: Yes
- Rotation: Std
- Clutch Type: C - Heavy Duty
- Bolt Quantity: 4
- Use Type: Heavy
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Mount Dia. IN: 2.59
- Electronic Clutch?: Non Electronic
- Overall Height MM: 84.9
- Fan Bolt Circle IN: 3.25
- Dia. IN: 7.2
- Description: Fan Clutches
- Overall Dia. MM: 182.9
- Clutch Maximum Diameter: 7.2
- Bolt Hole Quantity: 4
- Style: Heavy Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: 5/16-18 Hole
- Distance From Clutch To Mounting Flange:
- 1.62
- 1.63
- Mounting Type: Flange
This Part Fits the Following OEM/Substitute Numbers:
067203, 11136956V, 115045, 115046, 115052, 115054, 12306610, 140021, 14006727, 14006731, 14006732, 14006733, 14006734, 14009083, 14010297, 14020686, 14020688, 14044660...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1962 - Buick Invicta |
Showing 1 - 10 of 15 products
Loading...