Image
Product
Price
- Water Outlet Gasket
- Type: Water Outlet Gasket Use: Thermostat Housing
- FEL-PRO 35114 Water Outlet Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
0373605, 0374382, 0390042, 1064ST, 11004, 110041, 11050, 110501, 25058, 25282, 30923, 33641, 471114, 724, 74-0017, 7459233, A58, B64...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Pinto | L | - | 4 Cyl 2.3L | 140 |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.89
- Flange Thickness: 0.05 In
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T3E, 13349, 202-192, 20292, 237, 3043066, 33259, 3349, 35349, 4425620, 83500813, 9202192, 96143939, 96282726, P3349, S334192
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Pinto | L | 1989 | 4 Cyl 2.0L | 122 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Ford Pinto |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Ford Pinto |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Ford Pinto |
- Visual Standard Mini Lamp
- Miniature Lamp - Blister Pack
- Wagner Standard BP89 Light Bulb - Multi-Purpose (Card of 2 )
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 750
- Voltage: 13.000
- Wattage: 7.540
- Length:
- 1.438
- 37.000
- Amperage Rating: 0.580
- Brightness: 6.000
- Bulb Base Type: Single Contact Bayonet
- Bulb Type: Miniature Lamp G-6
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Ford Pinto |
- Ford EAO; Cosworth YB Cylinder Head Gasket
- Ford EAO; Cosworth YB .070in. MLS Cylinder Head Gasket; 92.5mm Bore
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Ford/cosworth Yb Group A
-
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
- Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.070". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1974 - Ford Pinto | Base |
- Ford EAO; Cosworth YB Cylinder Head Gasket
- Ford EAO; Cosworth YB .060in. MLS Cylinder Head Gasket; 92.5mm Bore
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Ford/cosworth Yb Group A
-
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
- Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.060". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1974 - Ford Pinto | Base |
- Rear Main Seal Set
- Rubber; Two-piece
- FEL-PRO BS 30136 Rear Main Seal Set
- Product Attributes:
- Part Design or Feature or Use: Two-piece
- Part Material: Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
17050, 7412356, 75050, BS 168, JV730, JV730R, RCS510, RM683P, RM730R, RS29025
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1974 - Ford Pinto | L | - | Rear | 4 Cyl 2.3L | 140 |
- Engine Crankcase Breather Cap
- Product Attributes:
- Neck Diameter: 1.19 In
- Gasket/Seal Material: Rubber
- Shell Diameter: 2.82 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10071, 11071, 12C21, 14071, 31072, 703-1691, 8071, 9MO71, C8AZ6766A, C8AZ6766B, D1AZ6766A, D1ZZ6766A, D60Z6766A, D9RZ6766A, E3AZ6766A, E5UZ6766A, E8TZ6766A, EC1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Pinto | L | - | 4 Cyl 2.3L | 140 |
Showing 1 - 10 of 17 products
Loading...