Image
Product
Price
- FRAM, PH2870A, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.210
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Nitrile Rubber
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.480
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
21394MP, 51792XE, 61394BP, CN-10, L20014
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- Engine Coolant Reservoir Cap
- Relief pressure 30 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Diameter: 2.44
- Valve OD: 1.21 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10247, 11247, 12R25, 1678-290342, 17043, 17111468076, 17111742231, 17117639022, 31332, 703-1399, 7043, 9T42, DLR14703, P7043, T42
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
- 16in. Tornado Electric Puller Fan; Standard Mounting Kit
- 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
- 16in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 16.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - BMW 325i |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.79 In
- Shell Diameter: 2.53 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
026103485A, 10079, 10115, 11079, 12C27, 14079, 2078-290332, 26103485, 31100, 703-1373, 8079, 9MO79, MO79, P8079, SO79
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
Showing 1 - 10 of 143 products
Loading...