Shop By Product Matching "Engine"

Choose your Engine for your 1992 Mazda Navajo


Showing 1 - 10 of 47 products
Image
SKU
Product
Rating
Price

FelPro
  • Intake Manifold Gasket Set
  • Valve cover gskts. incl. PermaDryPlus int. manifold gskts. incl.
  • FEL-PRO MS 98005 T Intake Manifold Gasket Set
  • Product Attributes:
    • Part Material: Permadryplus Rigid Carrier Intake Manifold Gaskets
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
50004P, MS50004P

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1992 - Mazda Navajo V - Lower and Upper 6 Cyl 4.0L 245

Motorad
  • Thermostat-192 Degrees
  • Temperature 198F Includes seal OEM Recommended Temp
  • Standard
  • Product Attributes:
    • Installation Tool Included: No
    • Sealing Flange Outside Diameter: 2.05
    • Flange Thickness: 0.05 In
    • Gasket/Seal Material: Rubber
    • Jiggle Pin Weep Hole: Yes
    • Temperature (Degree): 198
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

This Part Fits the Following OEM/Substitute Numbers:
12T76E, 1601-24097, 198-333, 3199, 3199-TS, 333-198, 33398, 9333198, E6TZ8575A, F2TZ8575A, F5DZ8575A, KH4115171, NI, P3199, TX788D, ZZL015171A

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Mazda Navajo V - 6 Cyl 4.0L 245

Prestone
  • Prestone Amam Gen 2 50/50 6/1 GAL
  • Extended Life 50/50, Ready to Use Prediluted
  • Product Attributes:
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: No Dilution Required
    • Phosphate Free: Yes
    • Boiling Point at 50 50 Mixture: 229
  • for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

Prestone
  • Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
  • Extended Life, Full Strength Concentrate
  • Product Attributes:
    • Biodegradable: No
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: 5 To 7
    • Phosphate Free: Yes
    • Ethylene Glycol: Yes
    • Boiling Point at 50 50 Mixture: 229
  • Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Burst Pressure: 230.000
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.797
    • Non Slip Grip: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
    • Micron Rating: 8.000
    • Torque Nut: No
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
3645, 3I-1412, 6018, F76006, FF833, TP1049

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

Motorad
  • Fail-Safe Thermostat-198 Degrees
  • "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 198F Includes seal OEM Recommended Temp
  • Fail-Safe
  • Product Attributes:
    • Installation Tool Included: No
    • Sealing Flange Outside Diameter: 2.05
    • Flange Thickness: 0.068 In
    • Gasket/Seal Material: Rubber
    • Jiggle Pin Weep Hole: Yes
    • Temperature (Degree): 198
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

This Part Fits the Following OEM/Substitute Numbers:
1601-291008, 7333-198, 73339, 97333198, NI, P7333-198, SS198-3337

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Mazda Navajo V - 6 Cyl 4.0L 245

Derale
  • 16in. Tornado Electric Puller Fan; Standard Mounting Kit
  • 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
  • 16in. Tornado Electric Fan; Standard Kit
  • Tornado Electric Puller Fan
  • Product Attributes:
    • Diameter (in.): 16.000 In.
  • Features:
    • Reliable/Efficient/High Torque Motors
    • 2175 CFM
    • Reversible Design/Can Be Used As Pusher Or Puller
    • Includes Nylon Mounting Kit
  • Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

Fram
  • FRAM, HP1, Oil Filter
  • FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
  • Product Attributes:
    • Non Slip Grip: No
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 500.000
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 22.000
    • Marine Approved: No
    • Outside Diameter: 3.672
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.

This Part Fits the Following OEM/Substitute Numbers:
3120MP, 33120, 86120MP, BF7613, BF992, FF204

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

Derale
  • Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
  • Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
  • Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
  • Electric Fan Controller
  • Features:
    • Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
    • 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
    • Thread in 3/8 in. NPT Temperature Sensor
    • Heavy Duty 40/60 Amp Relay
    • Includes AC Override Circuit
    • Ground Circuit Relay
    • Replacement 3/8 in. NPT Sensor Part Number 16750
  • This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.

Additional Fitment Information:
Vehicle
1992 - Mazda Navajo

FelPro
  • Valve Cover Gasket Set
  • PermaDryPlus
  • FEL-PRO VS 50368 T Valve Cover Gasket Set
  • Product Attributes:
    • Part Material: Permadryplus Rigid Carrier
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
19950, VS325P

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Mazda Navajo V - 6 Cyl 4.0L 245
Showing 1 - 10 of 47 products

Loading...