Shop By Product Matching "Engine"
Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
This Part Fits the Following OEM/Substitute Numbers:
045310250A, 0K9A210250, 0K9A210250A, 10082, 11082, 12C30, 14082, 145610250, 2078-290334, 2651038000, 31083, 45310250, 703-1332, 8082, 887110250, 887110250A, 9MO82, KK15010250...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Mazda 929 | V | 2954 | 6 Cyl 3.0L | 180 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10188065, 14052461, 14100796, 15225914, 15612113, 15664400, 15732305, 15782203, 15863393, 16199M, 1645476, 20781031, 20809018, 22537653, 22726953, 22757689, 25530817, 28475...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1994 - Mazda 929 | V | 2954 | Thermostat To Engine | GAS | 6 Cyl 3.0L | 180 |
- Antifreeze/Coolant
- Asian Vehicle Red Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Red Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Toyota®, Lexus®, Scion® and others) requiring a red, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- Antifreeze/Coolant
- Dex-Cool® Antifreeze/Coolant Concentrate 1 GA
- Dex-Cool Orange Concentrate - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- 50/50
- Concentrate
- Flash Point - Deg. F: 212 -
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Concentrate
- Flash Point - Deg. C: 100 -
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- OE Coolant is Green OE Match
- PEAK OET Asian Extended Life Green 50/50 Pre-Diluted; 1 Gallon
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- Antifreeze/Coolant
- Dex-Cool® Antifreeze/Coolant Ready-to-Use 1 GA
- Dex-Cool Orange Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Mazda 929 |
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- M20x1.5
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- Spin-On Adapter Ports Up Filter Mount Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Remote filter thread size: 3/4-16
- Adapter inlet size: 1/2 Npt
- Remote filter inlet size: 1/2 Npt
- Remote filter landing: 2-1/2, 2-3/4, 3-1/2
- Adapter thickness: 1-3/4, 2
-
Features:
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- This Universal single filter kit allows oil filter to be relocated to a convenient, easy-access location. Includes a high quality, die cast aluminum 1/2" NPT ports up filter mount and a 1/2" NPT ports spin-on adapter with most everything you need for an easy installation. Filter mount uses Fram PH8A Oil Filter or equivalent. Designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter location. This all-new version has a billet style look and has an ultra-bright, polished appearance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Mazda 929 | V | 2954 | 6 Cyl 3.0L | 180 |
Showing 1 - 10 of 70 products
Loading...