Image
Product
Price
- Rear Main Seal Set
- PTFE Rubber One-piece Protective sleeve/Installation tool incl.
- FEL-PRO BS 40644 Rear Main Seal Set
- Product Attributes:
- Part Design or Feature or Use: One-piece
- Part Material: Ptfe Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
JV1635, RS30025
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Mazda B2500 | L | 2492 | Rear | 4 Cyl 2.5L | - |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- Visual Standard Mini Lamp
- Miniature Lamp - Blister Pack
- Wagner Standard BP194 Light Bulb - Multi-Purpose (Card of 2 )
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2f
- Average Rated Life: 2500
- Voltage: 14.000
- Wattage: 3.780
- Length:
- 1.052
- 27.000
- Amperage Rating: 0.270
- Brightness: 2.000
- Bulb Base Type: Wedge
- Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- 194;White;Super Bright;360degree diffused lens
- Want a bright LED bulb offering improved style and visibility at a great price? Eco Series produces 600 lumens light output. The compact size makes it fit into every application
- Product Attributes:
- Light Output: 600 Lumen
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Amp Draw per Bulb: 0.65 Amps @ 12v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- LED Source: up to 23 x 3020 LEDs
- Up to 600LM total output per bulb (high mode)
- Color: White/Amber/Red
- Current draw: 0.65A @ 12V (high mode)
- Voltage: 9V - 18V DC
- Diffused 360 degree lens creates smooth all-around illumination
- Compact size similar to stock bulb to ensure there are no fitment or clearance issues
- Polarity reversible contact points
- ECO Series LED bulbs offer improved style and visibility at a great price. The size is similar to the OEM bulb so converting to LED bulbs is as easy as changing the stock bulb. The smooth 360degree diffused lens illumination brightens the darkest spaces and make your vehicle stand out.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- FRAM, PH3600, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.470
- Non Slip Grip: Yes
- Gasket Thickness: 0.250
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.813
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
9710-1619, HP-4002, LF241, LF3393, PF1118, T08-1060, T08-1069
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- 16in. Tornado Electric Puller Fan; Standard Mounting Kit
- 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
- 16in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 16.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mazda B2500 |
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- .878
- 22
- Belt Material: Hsn
- OE Comparison Rating: Oe Exact
- Timing Marks: No
- Pitch:
- .375
- 9.5
- Cog Quantity: 131
- Pitch Length:
- 1248
- 49.125
- Profile Type: Modified Curvilinear (iii)
- Cord Material: Fiberglass
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
026-1009, 250276, 40276, 425-0276, 65770, 95276, 95276FN, B276, CD-276, F57E 6268 AA, F57E 6268 BB, F57Z 6268 A, OHC276, T276, TB-276, TB276, TX276, ZZM312205...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Mazda B2500 | L | 2492 | GAS | 4 Cyl 2.5L | - |
- Rear Main Seal Set
- Rubber; One-piece
- FEL-PRO BS 40620 Rear Main Seal Set
- Product Attributes:
- Part Design or Feature or Use: One-piece
- Part Material: Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
17054, 17267, 7412745, E2ZZ6701A, E5ZZ6701A, E9SZ6701A, F1AZ6701A, F1SZ6701A, F4AZ-6701-A, F4AZ6701A, JV1612, JV523, RM1612, RS29550
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Mazda B2500 | L | 2492 | Rear | 4 Cyl 2.5L | - |
- Thermostat-192 Degrees
- Temperature 192F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.5
- Flange Thickness: 0.11 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
13820, 14990, 1601-291053, 306-192, 30692, 33570S, 34037, 34037S, 34080, 452-192, 45820, 45990, 9306192, F4PZ8575AA, F57Z8575A, F6TZ8575AC, F87Z8575BA, F8CZ8575AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Mazda B2500 | L | 2492 | 4 Cyl 2.5L | - |
Showing 1 - 10 of 62 products
Loading...