Image
Product
Price
- Recommended Replacement 105,000 miles, Normal Driving Conditions
- Timing Belt
- Product Attributes:
- : Yes
- Top Width:
- 1.15
- 29
- Tooth Pitch:
- .37500
- 9.525
- Construction: Hi Temp
- Timing Marks: No
- Effective Length:
- 1067
- 42.01
- Tooth Profile: Round Tooth
This Part Fits the Following OEM/Substitute Numbers:
250245, 40245, 4667606, 95245, B245, CD-245, T245, TB-245, TB245
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Plymouth Neon | Camshaft |
- Radiator cap
- Relief Pressure 16 lb
- Standard
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
04596444AA, 04693175AA, 05278697AA, 06410487, 06410685, 06410782, 09975778, 10036879, 10049770, 10226, 10230, 10230ST, 10283897, 10409635, 12339878, 12474637, 12R7, 14099684...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Thermostat-195 Degrees
- Temperature 195F Includes thermostat and seal Thermostat only OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57E, 14209, 15209, 1601-24339, 208, 33849, 340-195, 34095, 34299, 35209, 4209, 4495721, 4573560, 4573560AB, 4573560AE, 4663565, 5278144AA, 9340195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Head Gasket
- Head Bolts Not Included Head Bolt Replacement Recommended ; PermaTorqueMLS
- FEL-PRO 9036 PT Head Gasket
- Product Attributes:
- Head Gasket Bore: 3.546"
- Head Gasket Manufactured Thickness: .0500"
- Part Material: Permatorquemls
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
20831, 477072AB, 4777071, 4777072, 4777125, 4884021AB, 5013714AA, 5014127AB, 5014127AC, 5096 212AA, 5096212aa, 5936A, AC5550
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Thermostat Gasket
- Type: Thermostat Gasket Use: Thermostat Housing Thermostat seal
- FEL-PRO 35588 Thermostat Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
112801, 4495721, 5278144AA, C31646
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Safety Lever Radiator Cap
- Relief Pressure 16 lb
- Safety Lever
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.48
- Lever Type:
- Safety Lever
- Yes
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: Yes
- Safely remove your radiator cap by venting the pressure from the cooling system before removing the cap. Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10330, 10330ST, 12R7S, 1678-290347, 17216, 380170, 7716, 9ST16, P7716, ST16
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Plymouth Neon |
- Thermostat-180 Degrees
- Temperature 180F Includes thermostat and seal Thermostat only Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57D, 1601-24338, 180-043, 340-180, 34080, 4208, 9340180, NI, P4208
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.31 In
- Shell Diameter: 2.72 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
0457 3497AB, 10111, 11111, 12C12, 14111, 2078-290325, 31118, 4573497, 4573497AB, 4621875, 4648831AA, 4648832AA, 4648832AB, 4666082AA, 4667724, 4667827, 4777536, 4884739AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | 4 Cyl 2.0L | 122 |
- Cut to Length, 4"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 50
- 600
- End 1 Inside Diameter:
- .625
- 16
- End 2 Inside Diameter:
- .625
- 16
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Plymouth Neon | L | 1996 | Pipe-2 To Engine | GAS | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 111 products
Loading...