Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Torque Nut: No
- Gasket Material: Base
- Gasket Type: O-ring
- Housing Color: White
- Inside Thread Diameter: 20mm X 1.5mm
- Bypass Relief Valve Setting: 13.000
- Outside Diameter: 2.690
- Gasket Outside Diameter: 2.810
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1661964-5, 51461, BW5141, FF1032, LF3571, WC21, WF2096, WFR-82022
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.38 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T120E, 192-644, 19301PHM305, 19301RMX306, 34818, 446-192, 44692, 54692, 9446192, NI, P44692
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Insight | L | 995 | 3 Cyl 1.0L | 61 |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Inside Thread Diameter: 20mm X 1.5mm
- Bypass Relief Valve Setting: 13
- Outside Diameter: 2.690
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Torque Nut: No
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
489, 576366-5125, ACD60, AR94510, AZF025, F538, FF4012, HF6184, HF742, HFR-86184, PT390-MPG
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Insight |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.24 In
- Shell Diameter: 2.18 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10134, 11134, 12C64, 14136, 2078-317698, 31284, 703-1670, 8136, 9MO136, MO136, P8136
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Insight | L | 995 | 3 Cyl 1.0L | 61 |
Showing 1 - 10 of 79 products
Loading...