Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- Engine Coolant Reservoir Cap
- Relief pressure 30 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Diameter: 2.44
- Valve OD: 1.21 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10247, 11247, 12R25, 1678-290342, 17043, 17111468076, 17111742231, 17117639022, 31332, 703-1399, 7043, 9T42, DLR14703, P7043, T42
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - BMW 320i | L | 2171 | 6 Cyl 2.2L | 132 |
- 16in. Tornado Electric Puller Fan; Standard Mounting Kit
- 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
- 16in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 16.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- Integrated Housing Thermostat-207 Degrees
- Temperature 207F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 4
- Jiggle Pin Included: No
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 207
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 207
- Bolts Included: No
- Opening Temperature: 207
- Outlet Diameter: 1.52 In; 1.52 In
- Temperature (Degree): 207
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
11530139877, 11531437040, 11537509227, 12T108D, 14602, 423-206, 4602, 4602-TS, 467-185, 56718, 85955, 86177, 902-813, 9467185, P4602, QRT72, TH6499.97J, TM1397...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - BMW 320i | L | 2171 | 6 Cyl 2.2L | 132 |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- PRO-TEC Cartridge Lube Metal Free Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 3.268
- Duty Type: Ld
- Micron: 22.00
- BetaRatio: 2/20/75=22/34/45
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 3.268
- Class: A
- Inner Diameter Bottom: 1.583
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1223, 178, 21223, 21223MP, 31223, 5001201201, 51223, 51223XP, 61223, 61223BP, 618-51223, 618-51223MP, 8-51223, 85223, AC 6222 E, B5247, CF482, CF5247...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2005 - BMW 320i | L | 2171 | Mexico | 6 Cyl 2.2L | 132 |
- High Flow Premium Media; H-3.969 in.; OD 3.281 in.; Cartridge; Viton Rubber Gasket Material
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- Thread Size: N/a
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 1.656 In. (42mm)
- Gasket Material: Viton Rubber
- Package Material: Corrugated
- PSI Relief Valve: No
- Outside Diameter: 3.281 In. (83mm)
- Removal Nut: No
- Item Height: 3.969 In. (101mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
0418149, 11421427908, 11421740534, 11427509430, 11427512300, 11427512301, 178, 21223, 51223, 61223, 72202, 85223, 88997057, 91223, 92223, AC6222E, AL8081, ALO8107...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
- Oil Filter
- H-3.969 in.; OD-3.281 in.
- K/N Performance Silver Cartridge Oil Filters are constructed with a high flow design that helps to improve engine performance by reducing oil filter restriction.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Inside Diameter: 1.656 In. (42mm)
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.500 In. (89mm)
- Package Material: Paperboard
- Product Box Length: 3.500 In. (89mm)
- PSI Relief Valve: No
- Outside Diameter: 3.281 In. (83mm)
- Removal Nut: No
- Item Height: 3.969 In. (101mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Cartridge Oil Filters are constructed with a high flow design that helps to improve engine performance by reducing oil filter restriction. K&N Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life and are engineered to handle virtually all grades of synthetic, conventional and blended motor oils. The pleated media provides high filtration capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation.
This Part Fits the Following OEM/Substitute Numbers:
0418149, 11421427908, 11421740534, 11427509430, 11427512300, 11427512301, 1223, 178, 21223, 51223, 61223, 72202, 85223, 88997057, 91223, 92223, AC6222E, AL8081...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - BMW 320i |
Showing 1 - 10 of 201 products
Loading...