Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut~22mm Thread
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Water Outlet Gasket
- Type: Water Outlet Gasket Use: Thermostat Housing Thermostat seal
- FEL-PRO 35489 Water Outlet Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
112461, 5F9Z 8255AC, 74-0219, 7452949, 9403116, 9XB0-68-07S, C31302, F1VY 8255-A, G31302, WO8403, WO8666
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Rear Main Seal Set
- PTFE Rubber One-piece Protective sleeve/Installation tool incl.
- FEL-PRO BS 40644 Rear Main Seal Set
- Product Attributes:
- Part Design or Feature or Use: One-piece
- Part Material: Ptfe Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
JV1635, RS30025
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | Rear | 8 Cyl 5.4L | 330 |
- Engine Connecting Rod Bearing Pair
- OE Replacement A Series (Aluminum) Standard
- Carrying on a tradition of durability and dependability, Clevite Bi-Metal (aluminum) engine bearings feature 100% lead-free aluminum silicon. Engineered with 60% more silicon than comparable competitive replacements, they provide better conditioning of journal surfaces. This results in greater seizure and wear resistance.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1985A, CR868SI
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Engine Connecting Rod Bearing Pair
- OE Replacement A Series (Aluminum) Standard
- Carrying on a tradition of durability and dependability, Clevite Bi-Metal (aluminum) engine bearings feature 100% lead-free aluminum silicon. Engineered with 60% more silicon than comparable competitive replacements, they provide better conditioning of journal surfaces. This results in greater seizure and wear resistance.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Lincoln Mark LT |
- Thermostat-195 Degrees
- Temperature 195F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
13254, 13779, 14989, 15779, 1601-290267, 228-195JV, 22896, 262, 33469, 34058, 35779, 369-195, 3779, 3L3Z8575AA, 3L3Z8575AC, 46359, 49359, 7L3Z8575B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19DJ, 13778, 13968, 1601-290266, 162, 228-180JV, 22881, 33468, 33468S, 3778, 9228180JV, P3778, S377180, XL3Z8575AA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Engine Coolant Reservoir Cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Valve OD: 1.30 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10238, 10238ST, 11238, 12R20, 1678-290338, 17038, 1M5Z8A080AA, 1W1Z8100AA, 217237S000, 217239FD0A, 31406, 3S4Z8A080AA, 3S4Z8A080AB, 3S4Z8A080AC, 5S4Z8101AA, 5S4Z8A080AA, 703-1726, 7038...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.39 In
- Shell Diameter: 2.74 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10117, 10117ST, 11117, 12590905, 12C47, 14119, 1F1Z6766AA, 1L2Z6763AA, 1L2Z6766AA, 1L5Z6763AA, 2078-328160, 2L3Z6582AA, 2L3Z6582CA, 2L3Z6582DA, 2L3Z6582FA, 2L3Z6582FB, 31275, 4C2Z6582CA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
Showing 1 - 10 of 159 products
Loading...