Image
Product
Price
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 11.9
- 302
- End 1 Inside Diameter:
- .75
- 19
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
This Part Fits the Following OEM/Substitute Numbers:
11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 88438, 92411JK60A, 96456718, 96553218, D88438
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - INFINITI G35 | V | 3498 | Tee To Engine | GAS | 6 Cyl 3.5L | - |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Left Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Left |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Left Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Left |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Left |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - INFINITI G35 |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - INFINITI G35 |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Right Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Right |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Right Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Right |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - INFINITI G35 | Right |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - INFINITI G35 |
Showing 1 - 10 of 147 products
Loading...