Image
Product
Price
- Engine Valve Lifter
- Box of 1
- Sealed Power HT-2271 Lifter (Pack of 4)
- Product Attributes:
- Design Feature 1: Hydraulic Lash Adj.
- Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.
-
Suggested Purchase Quantity: 32
- Most jobs typically require 32 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1025392, 123-80, 213-1766, 362271, 5302 1077, AJ03-12-100, F1AE6C501BB, F1AZ6C501A, F1AZ6C501B, F2AE6C501AB, F65E6C501AA, F67J6C501AA, F6DZ6C501A, F77Z6500AB, HL7000, JB2271, L4600, LIFFD6...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
- Water Outlet Gasket
- Type: Water Outlet Gasket Use: Water Outlet
- FEL-PRO 35489 Water Outlet Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
112461, 5F9Z 8255AC, 74-0219, 7452949, 9403116, 9XB0-68-07S, C31302, F1VY 8255-A, G31302, WO8403, WO8666
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
- Rear Main Seal Set
- PTFE Rubber One-piece Protective sleeve/Installation tool incl.
- FEL-PRO BS 40644 Rear Main Seal Set
- Product Attributes:
- Part Design or Feature or Use: One-piece
- Part Material: Ptfe Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
JV1635, RS30025
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | Rear | 6 Cyl 3.0L | 181 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Ford Escape |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Ford Escape |
- Spin-On Oil Defense, DL10575
- DEFENSE Spin-on Oil Filter
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.38 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.58 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7354-180, 73548, 97354180, NI, P7354-180, SS180-4537
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Ford Escape |
- Integrated Housing Thermostat-180 Degrees
- Temperature 185F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Jiggle Pin Included: Yes
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 180
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 180
- Bolts Included: No
- Opening Temperature: 180
- Outlet Diameter: 1.30 In; 0.74 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-316621, 1F7015171B, 3M4Z8575AB, 3M4Z8575B, 439-180, 47685, 48708, 512-185, 51280, 85689, 85980, 902-733, 9512185, L32715170A, L33615170, L35715170B, P51280, RT1193...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | L | 2488 | 4 Cyl 2.5L | 152 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.39 In
- Shell Diameter: 2.74 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10117, 10117ST, 11117, 12590905, 12C47, 14119, 1F1Z6766AA, 1L2Z6763AA, 1L2Z6766AA, 1L5Z6763AA, 2078-328160, 2L3Z6582AA, 2L3Z6582CA, 2L3Z6582DA, 2L3Z6582FA, 2L3Z6582FB, 31275, 4C2Z6582CA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 174 products
Loading...