Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mitsubishi Outlander Sport | L | 1998 | 4 Cyl 2.0L | 122 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mitsubishi Outlander Sport |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mitsubishi Outlander Sport |
- Head Gasket
- Head Bolts Not Included Head Bolt Replacement Recommended ; PermaTorqueMLS
- FEL-PRO 26557 PT Head Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mitsubishi Outlander Sport | L | 1998 | 4 Cyl 2.0L | 122 |
- FRAM, XG9688, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 310.000
- Replaceable Filter: No
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 3.020
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1719859, CB35
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mitsubishi Outlander Sport |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mitsubishi Outlander Sport |
- WIX Spin-On Lube Filter
- Original Equipment Part Number MZ 690072 Factory filled synthetic oil - WIX XP or WIX Premium Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 363
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
27356MP, 57356MP, 618-57356MP, 67356BP, 7356MP
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Mitsubishi Outlander Sport | L | 1998 | United States | 4 Cyl 2.0L | 122 |
- FRAM, PH9688, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 8.000
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 3.020
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
24346, 33935, 3I-1288, FF1073, FS19520, P559114, TP1057, WD-394
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mitsubishi Outlander Sport |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 28.88
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 105.89
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- 5.46
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1011A178, 13256, 22212-25000, 22212-25002, E-5283, EV168, EVHY11, V3256
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Mitsubishi Outlander Sport | L | 1998 | DOHC | 4B11 | 4 Cyl 2.0L | 122 |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Mitsubishi Outlander Sport | L | 1998 | DOHC | 4B11 | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 89 products
Loading...