Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
- Head Gasket
- Head Bolts Not Included Head Bolt Replacement Recommended 1.50mm Thick OE Number 11-12-7-553-210 ; PermaTorqueMLS
- FEL-PRO 26766 PT Head Gasket
This Part Fits the Following OEM/Substitute Numbers:
11-12-7-553-210
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - BMW 328i xDrive | L | 2996 | 6 Cyl 3.0L | - |
- Engine Mount
- OEM Replacement
This Part Fits the Following OEM/Substitute Numbers:
22116760330, 9682, A4012, B9682, EM-9682
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - BMW 328i xDrive | L | 2996 | Front Left | 6 Cyl 3.0L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - BMW 328i xDrive | L | 2996 | Front Right | 6 Cyl 3.0L | - |
- Integrated Housing Thermostat-207 Degrees
- Temperature 207F Includes housing and thermostat OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Jiggle Pin Included: No
- Gasket/Seal Material: N/a
- Start to Open Temperature: 207
- Installation Tool Included: No
- Number Of Outlet Ports: 4
- Temperature: 207
- Bolts Included: No
- Opening Temperature: 207
- Outlet Diameter: 1.51 In; 1.53 In; 1.02 In; 0.87 In
- Temperature (Degree): 207
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
11537549476, 34246, 465195, 49269, 55682, 568-207, 56807, 56807-TS, 85957, 902-816, 9568207, P56807, TM1497
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - BMW 328i xDrive | L | 2996 | 6 Cyl 3.0L | - |
- FRAM, CH10075, Oil Filter
- Cartridge Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 0.610
- Inner Diameter Bottom: 1.457
- Non Slip Grip: No
- Gasket Thickness: 0.109
- Torque Nut: No
- Inside Diameter Top: 1.457
- Gasket Material: O-ring (1) O-ring 1
- Gasket Type: O-ring
- Marine Approved: No
- Outside Diameter: 2.876
- Gasket Outside Diameter: 0.813
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
06E 115 562A, 10-30200, 21-8060, 2H0-13440-90, E5205, HP-7015, KN-145, LF574, P7007
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
- 16in. Tornado Electric Puller Fan; Standard Mounting Kit
- 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
- 16in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 16.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
- High Flow Premium Media; H-3.125 in.; OD-2.875 in.; w/o psi Relief Valve
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- Thread Size: N/a
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.100 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 1.656 In. (42mm)
- Gasket Material: Viton Rubber
- Package Material: Corrugated
- PSI Relief Valve: No
- Outside Diameter: 2.875 In. (73mm)
- Removal Nut: No
- Item Height: 3.125 In. (79mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
0418195, 11427541827, 11427566327, 11427580676, 11427640862, 11427854445, 19254713, 27327, 55495105, 57327, 67327, 727, 7327, 84327, ALO8168, CF5607, CH10075, CH8081...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - BMW 328i xDrive |
Showing 1 - 10 of 170 products
Loading...