Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford Lobo |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford Lobo |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.94
- Duty Type: Ld
- Micron: 21.00
- Length: 0.00
- Flow Rate: 10-12 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Inner Diameter Bottom: 0.00
- BetaRatio: 2/20=6/20
- Media Material: Enhanced Cellulose
- Outer Diameter Bottom: 0.00
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
57502MP, 618-57502MP, 67502BP, 7502MP, PTL57502MP
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford Lobo | V | 4951 | Mexico | 8 Cyl 5.0L | 302 |
- Thermostat-195 Degrees
- Temperature 195F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
13254, 13779, 14989, 15779, 1601-290267, 228-195JV, 22896, 262, 33469, 34058, 35779, 369-195, 3779, 3L3Z8575AA, 3L3Z8575AC, 46359, 49359, 7L3Z8575B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 6223 | 8 Cyl 6.2L | 380 |
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19DJ, 13778, 13968, 1601-290266, 162, 228-180JV, 22881, 33468, 33468S, 3778, 9228180JV, P3778, S377180, XL3Z8575AA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 6223 | 8 Cyl 6.2L | 380 |
- Engine Coolant Reservoir Cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Valve OD: 1.30 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10238, 10238ST, 11238, 12R20, 1678-290338, 17038, 1M5Z8A080AA, 1W1Z8100AA, 217237S000, 217239FD0A, 31406, 3S4Z8A080AA, 3S4Z8A080AB, 3S4Z8A080AC, 5S4Z8101AA, 5S4Z8A080AA, 703-1726, 7038...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 4951 | 8 Cyl 5.0L | 302 |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F Alternate Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7265-180, 76580, 97265180, NI, P7265-180, SS180-6527
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 6223 | 8 Cyl 6.2L | 380 |
- Fail-Safe Thermostat-195 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 195F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-291000, 7265-195, 76595, 97265195, NI, P7265-195, SS195-6527
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 6223 | 8 Cyl 6.2L | 380 |
- Thermostat-160 Degrees
- Temperature 160F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 160
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
160JV-822, 228-160JV, 22861, 3776, 9228160JV, NI, P3776
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 6223 | 8 Cyl 6.2L | 380 |
- Thermostat-190 Degrees
- Temperature 190F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.39
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.38 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.58 In
- Temperature (Degree): 190
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
34238, 34238S, 459180, 46238, 49229, 49238, 56559, 655-190, 65590, 9655190, BL3Z8575A, BR3Z8575C, BR3Z8575E, P65590, RT1227
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford Lobo | V | 4951 | 8 Cyl 5.0L | 302 |
Showing 1 - 10 of 20 products
Loading...