Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford Focus |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford Focus |
- Engine Mount
- OEM Replacement
This Part Fits the Following OEM/Substitute Numbers:
A5646, AV6Z6038A, C5646
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | Automatic Dual Clutch | Front | 4 Cyl 2.0L | Titanium | 122 |
- FRAM, XG3614, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 310.000
- Replaceable Filter: No
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
5214435, AF27, B23145, BE-231, FB100
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Engine Coolant Water Outlet
- Product Attributes:
- Installation Tool Included: No
- Gasket Type: Seal
- Number Of Outlet Ports: 5
- Mounting Hardware Included: No
- Gasket/Seal Material: Rubber
- Mounting Hole Quantity: 4
- Seal Type: Rubber
- Outlet Diameter: 0.48 In; 0.60 In; 0.64 In; 0.74 In; 1.29 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | Turbocharged | 122 |
- Engine Coolant Water Outlet
- Product Attributes:
- Installation Tool Included: No
- Gasket Type: Seal
- Number Of Outlet Ports: 5
- Mounting Hardware Included: No
- Gasket/Seal Material: Rubber
- Mounting Hole Quantity: 4
- Seal Type: Rubber
- Outlet Diameter: 0.48 In; 0.60 In; 0.64 In; 0.74 In; 1.29 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
This Part Fits the Following OEM/Substitute Numbers:
902-684, 9CH2690, CH2690, CJ5Z8K556B, NI
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 9 | Turbocharged | 122 |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.500
- Non Slip Grip: Yes
- Gasket Thickness: 0.078
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.859
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
2900535100, 600-211-6240, A44081, B236, LF283, LF3415, PF2158, RV-51
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Integrated Housing Thermostat-195 Degrees
- Temperature 195F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Jiggle Pin Included: Yes
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 195
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 195
- Bolts Included: No
- Opening Temperature: 195
- Outlet Diameter: 1.29 In; 0.73 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
48729, 514-195, 51495, 85981, 902-1071, 9514195, CP9Z8592G, HT195-415, P51495
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | Naturally Aspirated | 122 |
- Engine Coolant Reservoir Cap
- Relief pressure 21 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Valve OD: 2.04 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10262, 12R01, 1678-290983, 17057, 30680002, 31549, 703-4112, 7057, 9T57, BE8Z8100A, DG9Z8100A, P7057, RS531, T57
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Focus | - | - | - Cyl -L | - |
- Integrated Housing Thermostat-180 Degrees
- Temperature 180F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Jiggle Pin Included: No
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 180
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 180
- Bolts Included: No
- Opening Temperature: 180
- Outlet Diameter: 1.29 In; 0.73 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-290254, 441-180, 48728, 514-185, 51480, 51485, 85994, 902-682, 9514185, CJ5Z8575A, LF7015170, P51480, TI20282, TI20290
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | 4 Cyl 2.0L | Turbocharged | 122 |
Showing 1 - 10 of 101 products
Loading...