Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- FRAM, CH10075, Oil Filter
- Cartridge Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 0.610
- Inner Diameter Bottom: 1.457
- Non Slip Grip: No
- Gasket Thickness: 0.109
- Torque Nut: No
- Inside Diameter Top: 1.457
- Gasket Material: O-ring (1) O-ring 1
- Gasket Type: O-ring
- Marine Approved: No
- Outside Diameter: 2.876
- Gasket Outside Diameter: 0.813
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
06E 115 562A, 10-30200, 21-8060, 2H0-13440-90, E5205, HP-7015, KN-145, LF574, P7007
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
- WIX Cartridge Lube Metal Free Filter
- Original Equipment Part Number 11 42 7 953 125 with Aluminum Housing Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.91
- Duty Type: Ld
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 2.91
- Class: A
- Inner Diameter Bottom: 1.61
- WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.
This Part Fits the Following OEM/Substitute Numbers:
107509, 11 42 7 640 862, 11 42 7 953 125, 18181, 25.171.00, 75 23 2 01A I02, ADB112110, EF15607, ELH4459, F 026 407 175, FOP284, HU 816 z KIT, L18181, LF695, LVF L795, M 136, M L4539, M1C-155A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2014 - BMW 428i | L | 1997 | Mexico | 4 Cyl 2.0L | 122 |
- Integrated Housing Thermostat-226 Degrees
- Temperature 226F Includes housing and thermostat OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 2
- Jiggle Pin Included: Yes
- Gasket/Seal Material: N/a
- Start to Open Temperature: 226
- Installation Tool Included: No
- Number Of Outlet Ports: 3
- Temperature: 226
- Bolts Included: No
- Opening Temperature: 226
- Outlet Diameter: 1.54 In; 1.02 In; 1.52 In
- Temperature (Degree): 226
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
11537633476, 11537633477, 11538635689, 11538636594, 11538636595, 11538648791, 34788, 49618, 58222, 822-226, 82226, 85991, 902-5135, 9822226, HT226-228, P82226, TM25103, TM25108...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - BMW 428i | L | 1997 | 4 Cyl 2.0L | 122 |
- High Flow Premium Media; H-3.125 in.; OD-2.875 in.; w/o psi Relief Valve
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- Thread Size: N/a
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.100 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 1.656 In. (42mm)
- Gasket Material: Viton Rubber
- Package Material: Corrugated
- PSI Relief Valve: No
- Outside Diameter: 2.875 In. (73mm)
- Removal Nut: No
- Item Height: 3.125 In. (79mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
0418195, 11427541827, 11427566327, 11427580676, 11427640862, 11427854445, 19254713, 27327, 55495105, 57327, 67327, 727, 7327, 84327, ALO8168, CF5607, CH10075, CH8081...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 428i |
Showing 1 - 10 of 147 products
Loading...