Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | Pipe To Engine | GAS | 6 Cyl 3.6L | Naturally Aspirated | 217 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Cadillac XTS |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Cadillac XTS |
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Cadillac XTS |
- FRAM, PH10575, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 3.140
- Non Slip Grip: Yes
- Gasket Thickness: 0.225
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 3.550
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1719859, 3I-1211, 51516MP, 85516MP, CO1392, LF226, PF932, T08-1071
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Cadillac XTS |
- Thermostat Insert- 180 Degrees
- Temperature 180F Includes Insert and housing Gasket Insert OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: Yes
- Sealing Flange Outside Diameter: 1.37
- Bypass Diameter: 1.38 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T036D, 15148, 1601-496608, 34163, 34163S, 34734, 46148, 462180, 57198, 719-180, 71980, 9719180, P71980, QRT58
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | 6 Cyl 3.6L | Naturally Aspirated | 217 |
- Engine Coolant Reservoir Cap
- Relief pressure 20 lb Located on surge tank
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10271, 10271ST, 12R05, 13502353, 13502509, 1678-325922, 17062, 20838623, 68096261AA, 703-1546, 7062, 9202799, 9T62, P7062, RC115, T62
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | 6 Cyl 3.6L | Naturally Aspirated | 217 |
- Engine Oil Filler Cap
- Product Attributes:
- Shape: Round
- Grade Type: Regular
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Mounting Type: Cam On
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
12662196, 12667313, 8190, 9MO190, MO190
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | 6 Cyl 3.6L | Turbocharged | 217 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
12583570, 12593353, 12621520, 12631205, 12642163, 12642516, 12650077, 12662195, 14152, 1692078J00, 8152, FC220, FC232, FC243, MO152, NI, P8152
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | 6 Cyl 3.6L | Naturally Aspirated | 217 |
- Integrated Housing Thermostat-180 Degrees
- Temperature 180F Includes housing, thermostat, and gasket Complete Housing OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: Yes
- Bolt Hole Quantity: 3
- Jiggle Pin Included: Yes
- Gasket/Seal Material: Metal
- Start to Open Temperature: 180
- Installation Tool Included: No
- Number Of Outlet Ports: 4
- Temperature: 180
- Bolts Included: Yes
- Opening Temperature: 180
- Outlet Diameter: 0.64 In; 0.75 In; 0.78 In; 1.32 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
This Part Fits the Following OEM/Substitute Numbers:
1011-180, 10118, 10118DL, 12603830, 12631889, 12638836, 12651113, 12681132, 15-81750, 180-1101, 50258, 51011, 85947, 902-693, 91011180, N/I, P10118
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Cadillac XTS | V | 3564 | 6 Cyl 3.6L | Naturally Aspirated | 217 |
Showing 1 - 10 of 90 products
Loading...