Image
Product
Price
- Thermostat Gasket
- Type: Thermostat Gasket Use: Thermostat Housing Thermostat inlet
- FEL-PRO 35445 Thermostat Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
039-0132, 112271, 112711, 112861, 16325-0H020, 16325-28010, 16325-62010, 16325-76010, 163250T030, 19185389, 21049-ED00B, 21049ED00A, 21049ET01A, 74-0171, 7714926, 94856781, C31090, C31249...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Nissan Rogue |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Nissan Rogue |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Torque Nut: No
- Gasket Material: Base
- Gasket Type: O-ring
- Housing Color: White
- Inside Thread Diameter: 20mm X 1.5mm
- Bypass Relief Valve Setting: 13.000
- Outside Diameter: 2.690
- Gasket Outside Diameter: 2.810
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1661964-5, 51461, BW5141, FF1032, LF3571, WC21, WF2096, WFR-82022
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Nissan Rogue |
- Oil Pan Drain Plug Gasket
- 0.500in Inside Diameter x 0.750in Outside Diameter Flat Washer Copper
- FEL-PRO 73347 Oil Pan Drain Plug Gasket
- Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Inside Thread Diameter: 20mm X 1.5mm
- Bypass Relief Valve Setting: 13
- Outside Diameter: 2.690
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Torque Nut: No
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
489, 576366-5125, ACD60, AR94510, AZF025, F538, FF4012, HF6184, HF742, HFR-86184, PT390-MPG
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Nissan Rogue |
- Thermostat-180 Degrees
- Temperature 180F Includes seal Located at water inlet OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.26 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T93D, 14678, 1601-90714, 1767082Z10, 212006N210, 21200EA000, 33941, 33941S, 395-180, 427-180, 42718, 46678, 52780, 9427180, QRT17, TX14582D
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
- Thermostat-203 Degrees
- Temperature 203F Includes seal Water Control Valve; Located at water outlet. OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 203
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T122F, 15112, 1601-321906, 212303RC1A, 212306N200, 212306N20A, 21230EL00B, 34160, 455192, 457-205, 45705, 46122, 55705, 9457205, P45705, QRT36, TX16895
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
- Thermostat Kit-180 & 203 Degrees
- Temperature 180F & 203F Includes water outlet gasket and 2 seals Thermostat Kit includes Thermostats located at water inlet & outlet. OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In & 0.05 In
- Bypass Diameter: 1.09 In
- Gasket/Seal Material: Rubber/paper
- Temperature (Degree): 185 And 205
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-496523, 427457, 42780, 457724, 9427457, NI, P42780
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.27 In
- Shell Diameter: 2.47 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10107, 11107, 12C8, 14107, 152550B000, 152551P101, 152551P110, 1525540F00, 1525540F01, 152558B000, 152559N00A, 15255D0103, 15255D0104, 15255D5500, 15255D5501, 1692082Z00, 2078-290324, 31087...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Nissan Rogue | L | 2488 | 4 Cyl 2.5L | 152 |
Showing 1 - 10 of 114 products
Loading...