Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | ZL1 | 376 |
- Engine Conversion Gasket Set
- RTV Sealant Included for Upper Oil Pan Gasket
- FEL-PRO CS 26744-1 Engine Conversion Gasket Set for Chevrolet Corvette
- Product Attributes:
- Grade Type: Premium
-
Features:
- Conversion Sets (CS) provide every gasket for lower engine work - add a Head Set (HS) for complete engine overhaul work
- Application-specific design ensures perfect fit
- Meets or exceeds all original equipment specifications
- Unsurpassed quality you can trust
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | 376 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Camaro |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Camaro |
- Antifreeze/Coolant
- Application Temperature: Year-Round
- Dex-Cool® Antifreeze/Coolant Concentrate 1 GA
- Dex-Cool Orange Concentrate - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- 50/50
- Concentrate
- Flash Point - Deg. F: 212 -
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Concentrate
- Flash Point - Deg. C: 100 -
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Camaro | V | - | 6 Cyl 3.6L | 222 |
- HT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 Active Fuel Management Engine ; Do Not Use this Lifter in Dynamic Fuel Management (DFM) Engines
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | 6 | Supercharged | 376 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Camaro | L | 1998 | 4 Cyl 2.0L | 122 |
- 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Camaro |
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- M22x1.5
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- Spin-On Adapter Ports Up Filter Mount Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Remote filter thread size: 3/4-16
- Adapter inlet size: 1/2 Npt
- Remote filter inlet size: 1/2 Npt
- Remote filter landing: 2-1/2, 2-3/4, 3-1/2
- Adapter thickness: 1-3/4, 2
-
Features:
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- This Universal single filter kit allows oil filter to be relocated to a convenient, easy-access location. Includes a high quality, die cast aluminum 1/2" NPT ports up filter mount and a 1/2" NPT ports spin-on adapter with most everything you need for an easy installation. Filter mount uses Fram PH8A Oil Filter or equivalent. Designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter location. This all-new version has a billet style look and has an ultra-bright, polished appearance.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Camaro |
- LS Engines
- Chrome with Bowtie Logo; LS Engines; Mounting Bolt(s) Included:Yes; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Oil Filler Cap Included: Yes
- Make: Gm
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Gm Ls Series Engines
- Cap Finish: Chrome
- Material:
- Aluminum
- Die Cast Aluminum
- Feature/Benefit: Hurray, The Wait Is Over!
- Engine: Chevy/gm Ls
- Breather Grommet Included: No
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Cap Type: Push-in
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Inside Clearance Height:
- 2.575
- 65.5
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- Hurray, the wait is over! Through innovative engineering, PROFORM has developed a valve cover that will take your generic looking stock LS engine, and give it a totally personalized look. These new valve covers are taller than stock valve covers, and can accommodate a wide variety of large valve train applications. These valve covers are available in 5 different styles, which include raised and recessed emblems. Unique mounting studs, and oil restricting baffles are included. Threaded mounting holes for Integrated Ignition Coil Bracket included. The passenger side valve cover has an oil filler hole. Sold in pairs. U.S. Pat. D657,798. You will need to purchase rubber gaskets for these valve covers separately. We recommend Fel-Pro part no. VS 50504 R. Internal Clearance note. The following rocker configurations will require the valve cover to be slightly modified: Jesel part numbers: KSS-317070, KSS-317575, and KSS-318080. Attention LSX-DR cylinder head owners: these valve covers will fit LSX-DR heads and clear the shaft mounted valvetrain. The mounting bolts included with these LS covers are not compatible with the LSX-DR cylinder heads. LSX-DR owners will need to purchase a LSX-DR mounting bolt kit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | 376 |
Showing 1 - 10 of 137 products
Loading...