Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Modular Hose: No
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 12.9
- 328
- End 1 Inside Diameter:
- 1.18
- 30
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
This Part Fits the Following OEM/Substitute Numbers:
16251, 165710T040, 1657137100, 20527S, 23519, 66204, 72458, 72928, 88975751, C72458, C72928
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2018 - Toyota Corolla | L | 1798 | Automatic CVT | Upper - Tee To Engine | GAS | 4 Cyl 1.8L | 110 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Corolla |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Corolla |
- CARTRIDGE OIL FILTER, DEFENSE
- Cartridge filter Cartridge Oil Filter DEFENSE
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Corolla |
- Engine Coolant Thermostat Housing
- Includes housing
- Product Attributes:
- Number Of Outlet Ports: 2
- Bolts Included: No
- Mount Hole Diameter: 0.34 In; 0.34 In; 0.34 In
- Mount Hole Quantity: 3
- Outlet Diameter: 0.67 In; 0.67 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2018 - Toyota Corolla | L | 1798 | Lower | 2ZR-FE | 4 Cyl 1.8L | 110 |
- Engine Coolant Thermostat Housing
- Includes housing
- Product Attributes:
- Number Of Outlet Ports: 2
- Bolts Included: No
- Mount Hole Diameter: 0.34 In; 0.34 In; 0.34 In
- Mount Hole Quantity: 3
- Outlet Diameter: 0.67 In; 0.67 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
This Part Fits the Following OEM/Substitute Numbers:
163230T020, 163230T021, 9CH1020, CH1020
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2018 - Toyota Corolla | L | 1798 | Lower | 2ZR-FE | 4 Cyl 1.8L | 110 |
- FRAM, PH4967, Oil Filter
- Spin-on Oil Filter Spin-on
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.210
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 350.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 14.000
- Marine Approved: No
- Outside Diameter: 2.688
- Gasket Outside Diameter: 2.480
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
32 00 5769, CAS6607, M1-108, ML16825, PH7025, PS-2004, PZ-37
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Corolla |
- FRAM, CH10358, Oil Filter
- Cartridge Oil Filter Cartridge filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 0.560
- Inner Diameter Bottom: 1.110
- Non Slip Grip: No
- Gasket Thickness: 0.156
- Torque Nut: No
- Inside Diameter Top: 1.110
- Gasket Material: Gasket (1) Gasket 1
- Gasket Type: Gasket & O-ring
- Marine Approved: No
- Outside Diameter: 2.390
- Gasket Outside Diameter: 2.000
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
11 42 1 253 919, 1210031-T0301, 30750013, HP-7016, KN-401, LF609, P149
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Corolla |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.2
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.14 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.74 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-291005, 7281-180, 78180, 97281180, NI, P7281-180, SS180-1827
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Toyota Corolla | L | 1798 | 4 Cyl 1.8L | Base | 110 |
- Thermostat-170 Degrees
- Temperature 170F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.2
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.14 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.74 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T35C, 14077, 1601-290214, 17, 281-170, 28170, 33867, 34002, 4077, 48327, 9091603107, 9281170, 94856782, P4077
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Toyota Corolla | L | 1798 | 4 Cyl 1.8L | Base | 110 |
Showing 1 - 10 of 150 products
Loading...