Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW M2 |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW M2 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW M2 |
- BMW F8X M3/M4 Performance Oil Cooler, 2015-2020
- Oil Cooler, fits BMW F8X M3/M4 2015-2020
- Product Attributes:
- SellingPoint04: Increases Oil Capacity By .44 Quarts
- SellingPoint05: Robust Bar-and-plate Construction For Improved Durability And Heat Rejection
- SellingPoint06: Silver Powder-coated Finish For Maximum Protection
- TechSpec Overall Length (in): 29.2
- SellingPoint07: No Cutting Or Modifications Required
- SellingPoint01: Direct Fit For The 2015-2020 Bmw F8x M3, M4, And M2 Competition
- SellingPoint02: Full Aluminum Tig-welded Construction
- SellingPoint03: 46-percent Increase In Core Volume
- TechSpec Chassis Codes: F80--f82--f83--f87
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10: N/a
- TechSpec Note: Fits X3/x4 M Only.
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: S55
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 7
- TechSpec Fluid Capacity (qts): 1.13
- TechSpec Caution: N/a
- TechSpec Applications: 2015-2018 Bmw M3 Sedan--2015-2020 Bmw M4 Coupe--2015-2020 Bmw M4 Convertible--2016 Bmw M4 Gts Coupe--2019-2020 Bmw M4 Cs Coupe--2019-2020 Bmw M2 Competition--2020 Bmw X3 M--2021 Bmw X3 M--2022 Bmw X3 M--2020 Bmw X4 M--2021 Bmw X4 M
- TechSpec Includes: Performance Oil Cooler--replacement O-rings--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 15
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 1.6
-
Features:
- Direct fit for the 2015-2020 BMW F8X M3 and M4
- Full aluminum TIG-welded bar-and-plate construction
- 46-percent increase in core volume
- Increases oil capacity by .44 quarts
- Mishimoto Lifetime Warranty
- Add some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler. True to form, the engineers at BMW designed the M3/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where It'should be. We also added 10mm to the core?s thickness, equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - BMW M2 | Competition |
- BMW F8X M3/M4 Performance Oil Cooler, 2015-2020
- Oil Cooler, fits BMW F8X M3/M4 2015-2020
- Product Attributes:
- SellingPoint04: Increases Oil Capacity By .44 Quarts
- SellingPoint05: Robust Bar-and-plate Construction For Improved Durability And Heat Rejection
- SellingPoint06: Silver Powder-coated Finish For Maximum Protection
- TechSpec Overall Length (in): 29.2
- SellingPoint07: No Cutting Or Modifications Required
- SellingPoint01: Direct Fit For The 2015-2020 Bmw F8x M3, M4, And M2 Competition
- SellingPoint02: Full Aluminum Tig-welded Construction
- SellingPoint03: 46-percent Increase In Core Volume
- TechSpec Chassis Codes: F80--f82--f83--f87
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10: N/a
- TechSpec Note: Fits X3/x4 M Only.
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: S55
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 7
- TechSpec Fluid Capacity (qts): 1.13
- TechSpec Caution: N/a
- TechSpec Applications: 2015-2018 Bmw M3 Sedan--2015-2020 Bmw M4 Coupe--2015-2020 Bmw M4 Convertible--2016 Bmw M4 Gts Coupe--2019-2020 Bmw M4 Cs Coupe--2019-2020 Bmw M2 Competition--2020 Bmw X3 M--2021 Bmw X3 M--2022 Bmw X3 M--2020 Bmw X4 M--2021 Bmw X4 M
- TechSpec Includes: Performance Oil Cooler--replacement O-rings--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 15
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 1.6
-
Features:
- Direct fit for the 2015-2020 BMW F8X M3 and M4
- Full aluminum TIG-welded bar-and-plate construction
- 46-percent increase in core volume
- Increases oil capacity by .44 quarts
- Mishimoto Lifetime Warranty
- Add some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler. True to form, the engineers at BMW designed the M3/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where It'should be. We also added 10mm to the core?s thickness, equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2019 - BMW M2 | L | 2979 | GAS | 6 Cyl 3.0L | Competition | - |
- Cartridge Oil Filter
- Extra Guard
- Product Attributes:
- O-Ring Inside Diameter: 3.172
- Outer Diameter Top: 2.876
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- O-Ring (1) Outside Diameter: 0.587
- Washable: No
- Non Slip Grip: No
- Torque Nut: No
- O-Ring Outside Diameter: 3.310
- Top Inside Diameter: 1.615
- Outer Diameter Bottom: 2.876
- Filter Media Material: Cellulose/synthetic Blend
- Washer Inside Diameter: 0.473
- Anti-Drain Back Valve: No
- O-Ring Thickness: 0.138
- O-Ring (1) Thickness: 0.055
- Washer Thickness: 0.055
- O-Ring (1) Inside Diameter: 0.473
- Height: 3.113
- Washer Outside Diameter: 0.587
- Housing Color: Na
- Grade: Advanced
- Inside Diameter Bottom: 1.615
- Bypass Relief Valve: No
This Part Fits the Following OEM/Substitute Numbers:
06E 115 562A, 10-30200, 11 42 7 541 827, 11 42 7 566 327, 11 42 7 640 862, 11 42 7 854 049, 11 42 7 854 445, 11 42 7 953 125, 11 42 7 953 129, 11 42 8 683 196, 11 42 8 683 204, 21-8060, 27327, 2H0-13440-90, 3307, 37327, 47327, 57327...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - BMW M2 | L | 2979 | 6 Cyl 3.0L | - |
- WIX Cartridge Lube Metal Free Filter
- Original Equipment Part Number 11427854445; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.893
- Duty Type: Ld
- Micron: 22.00
- BetaRatio: 2/20/75=22/34/43
- Media Material: Cellulose
- Outer Diameter Bottom: 2.893
- Class: A
- Inner Diameter Bottom: 1.614
- WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.
This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 247, 0 986 AF1 178, 0418195, 0FE00395, 1 457 429 269, 10-ECO062, 11 42 7 541 827, 11 42 7 566 327, 11427523201, 11427854049, 11427854445, 11427953129, 11428683196, 14093, 25.058.00, 27327, 314 322 0000, 3307...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - BMW M2 | L | 2979 | Canada | 6 Cyl 3.0L | - |
- Valve Cover Actuator Seal
- Product Attributes:
- Inside Diameter:
- 0.82 In
- 0.82 In.
- Package Contents: 1 Gasket
- Flange Thickness:
- 0.125 In
- 0.125 In.
- Contenidos del paquete: 1 Junta
- Inside Diameter:
-
Features:
- Direct replacement - this electronic variable valve lift eccentric shaft actuator seal is designed to match the fit of an original seal on specified vehicle years, makes and models
- Ideal solution - this seal is engineered to help prevent engine failure from critical loss of lubricant when an original seal has failed from heat or is leaking
- Durable construction - made from quality materials for long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This electronic variable valve lift eccentric shaft actuator seal is designed to match the fit of a leaking or failed original seal. It is engineered to help prevent engine failure from critical loss of lubricant on specified vehicles.
This Part Fits the Following OEM/Substitute Numbers:
11377502022, 458320
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Manuf. Body Code | Body | CID |
|---|---|---|---|---|---|---|---|
| 2019 - BMW M2 | L | 2979 | N55B30A | 6 Cyl 3.0L | F87 | Coupe | - |
- Engine Oil Filter Housing
- Product Attributes:
- Grade Type: Regular
- Package Contents:
- 1 Oil Filter Housing
- Filter
- Filter Thread Diameter: 2.5
- Contenidos del paquete:
- 1 Caja Del Filtro De Aceite
- Filtro
- Mounting Hole Quantity: 4
-
Features:
- Direct replacement - this engine oil filter housing is designed to match the fit and function of the original housing on specified vehicles
- Restores functionality - reliable replacement for a missing part that has failed due to cracking from over-tightening
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine oil filter housing is designed to match the fit and function of the original housing on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
11427548032, 11427597635, 11428642289, 11428683206, SK117133
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - BMW M2 | L | 2979 | 6 Cyl 3.0L | - |
- High Flow Premium Media; H-3.125 in.; OD-2.875 in.; w/o psi Relief Valve
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Item Weight: 0.100 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 1.656 In. (42mm)
- Gasket Material: Viton Rubber
- Package Material: Corrugated
- PSI Relief Valve: No
- Removal Nut: No
- Item Height: 3.125 In. (79mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
0418195, 11427541827, 11427566327, 11427580676, 11427640862, 11427854445, 19254713, 27327, 55495105, 57327, 67327, 727, 7327, 84327, ALO8168, CF5607, CH10075, CH8081...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - BMW M2 |
Showing 1 - 10 of 99 products
Loading...