Shop By Product Matching "Engine"
Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- Performance Air Intake, fits 2022+ Subaru WRX
- Performance Air Intake, fits 2022+ Subaru WRX
- Product Attributes:
- SellingPoint04: Highly-aggressive Intake Tone Under Acceleration
- SellingPoint05: Powder-coated Airbox Keeps Unwanted Hot Air From Entering The Air Intake
- SellingPoint06: Precision Cnc-machined Aluminum Maf Housing For Improved Flow And Accurate Maf Readings
- SellingPoint07: Mandrel-bent Aluminum Pipe Eliminates Restrictions And Increases Airflow
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Power Gains Of Up To 13.3 Hp And 16.6 Lb-ft On Stock Tune
- SellingPoint03: Dyno-tested For Safe Air/fuel Ratios Without Tuning
- TechSpec Air Filter Part Number: Mmaf-3007
- TechSpec Chassis Codes: N/a
- SellingPoint08: Mishimoto High-flow Oiled Air Filter Receives Maximum Airflow From The Front Of The Vehicle
- SellingPoint09: Us Patent Pending
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Filter Re-oil Is Not Included In Lifetime Warranty.
- SellingPoint15: N/a
- TechSpec Filter Diameter: 5.875
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2022+ Subaru Wrx
- TechSpec Includes: (1) Aluminum Intake Pipe--(1) Cnc-machined Aluminum Maf Sensor Housing--(1) High-flow, Oiled Filter--(1) Powder Coated Airbox--(1) Silicone Coupler--(3) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
-
Features:
- Direct fit for 2022+ Subaru WRX
- Power gains of up to 13.3 HP and 16.6 lb-ft on stock tune
- Dyno-tested for safe air/fuel ratios without tuning
- Highly-aggressive intake tone under acceleration
- Powder-coated airbox keeps unwanted hot air from entering the air intake
- Precision CNC-machined aluminum MAF housing for improved flow and accurate MAF readings
- Mandrel-bent aluminum pipe eliminates restrictions and increases airflow
- Mishimoto high-flow oiled air filter receives maximum airflow from the front of the vehicle
- Mishimoto Lifetime Warranty
- Air intakes are some of the most fundamental bolt-on upgrades to a vehicle, often making them a first for many enthusiasts. The 2022+ Subaru WRX is no different. While the stock set up is adequate for daily commuting, your 2022+ WRX needs to be able to breathe easy to keep up with the demands of an enthusiast's spirited driving. The engineers at Mishimoto set out to unlock your WRX’s full potential with the 2022+ Subaru WRX Performance Air Intake.----Our engineers started by replacing the restrictive stock air filter with our performance oiled cone filter to substantially increase air volume, then paired it with a durable powder-coated steel airbox for superior heat protection. Our CNC-machined, precision-designed MAF housing allows for increased intake air flow while maintaining safe air-fuel ratios, eliminating the need for a tune after installation. This mates with our mandrel-bent aluminum inlet pipe to provide superior airflow over stock and gives your WRX a more aggressive tone under acceleration. This intake boasts a 75.4-percent reduction in air restriction with dyno-proven gains of up to 13.3 HP and 16.6 lb-ft of torque on stock tune.----The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on performance. As with all Mishimoto products, this 2022+ Subaru WRX Performance Air Intake is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
200-60-INT-003
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Engine Cooling - Lower
- 88°C/191°F (OE temp.)
- (88°C/191°F)
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Crankshaft to Camshafts
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 92x109x8mm
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru WRX | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Solenoid/Oil Control Valve Assembly
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
Showing 1 - 10 of 28 products
Loading...