Image
Product
Price
- 5in. Turbo Back. Single Side Exit. AL
- Not For Use On Vehicles With Catalytic Converter (235 hp California Model)
- 5in. Turbo Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite 5 Inch Turbo Back Single Side Exit with Polished Exhaust Tip
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 20.5
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 6
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 97.9 | SLT | Standard Cab Pickup | 359 |
- Dynomax Exhaust Pipe Spout
- with Clamp
- Dynomax Dynomax 36474 Exhaust Pipe Spout
- Product Attributes:
- Attachment Type: Clamp On
- Mounting Hardware Included: Yes
- Tip Shape: Round
- Tip Edge Style: Rolled
- Tip Outlet Quantity: 1
- Tip Cut: Angle
- Tip Edge Type: Single Wall
- Inlet Inside Diameter: 3
- Outlet Outside Diameter: 4
-
Features:
- CUSTOM LOOK -- Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN -- Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL -- Clamp-on installation for an easy upgrade
- BETTER TOGETHER -- Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
- Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | V | - | 8 Cyl 5.7L | 140.5 | 345 |
- Muffler Bypass 4in. Inlet/Outlet 30in. Overall. T304
- 4 in. Inlet/Outlet Diameter 30 in. Overall Length 304 Stainless Steel 4.5 in. Outlet Diameter Tip Confirm Length Of The Muffler And Install Muffler Delete Of Same Length
- Muffler Bypass Pipe 4in. Inlet/Outlet 30in. Overall. T304 Stainless Steel.
- Armor Pro Single System Muffler Delete Pipe
- Product Attributes:
- Tubing Diameter: 4 Inch
- Vehicle Segment: Universal
- Major: Muffler/resonator
- Bolt-On Yes/No: Yes
- Grade Type: Performance
- UPS Able: Yes
- Minor: 4" Inlet
- Prop 65 (C, R or CR): Cr
-
Features:
- Universal Fit, Durable T304 Stainless Steel Construction.
- MBRP Exhaust, Muffler Bypass Pipe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- 4in. Turbo Back. Single Side Exit. T409
- Not For Use On Vehicles With Catalytic Converter (235 hp California Model)
- 4in. Turbo Back. Single Side Exit. T409 Stainless Steel.
- MBRP Armor Plus Turbo Back 4 Inch Single Side with Polished Tip, For 305hp Models
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 15.75
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Plus
- Exhaust Tip Diameter: 5
- Pipe Material: T409 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 97.9 | Standard Cab Pickup | 359 |
- Exhaust Brake - 2003-2004 Dodge Air/Turbo Mount
- Turbo Mount; Air activated;
- Exhaust Brake - 2003-2004 Dodge 5.9L Air Actuated Turbo Mount
- Exhaust Brake
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: 5.9l Cummins 03-04
- Suggested Product: 1061825
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD's exclusive Variable Orifice Technology
- BD's exclusive alumibronze bushing
- Piston ring-seals
- Stainless steel butterfly shaft
- Proven to stand-up under the harsh, high heat conditions of the exhaust environment
- BD's solid, offset butterfly
- All mounting hardware are made of corrosion resistant stainless steel
- Air compressor included
- There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.
- Spring loaded cylinder
- Pressure regulation
- Provides up to 150 retarding horsepower throughout the engine's RPM range
- Rugged, cast-iron housings
- It has been almost 30 years since we started shipping our first exhaust brakes. With that many hill and mountain roads experienced, we used the knowledge gained to continue to deliver the best designed exhaust brake for your application. Incorporating BD's exclusive Variable Orifice Technology, BD's solid, offset butterfly, spring loaded cylinder and pressure regulation provides up to 150 retarding horsepower throughout the engine's RPM range - not just at high rpm like some designs that use holes or additional parts and claim it as a better idea. A range of rugged, cast-iron housings for Dodge, Ford, Chevy and motor home applications that incorporate BD's exclusive alumibronze bushing, piston ring-seals and stainless steel butterfly shaft has proven to stand-up under the harsh, high heat conditions of the exhaust environment. BD's butterfly valve and rotating shaft are made of stainless steel to resist corrosion. An air compressor is included in most kits for newer pick-up trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Exhaust Manifold w/T4 Flange - Dodge 2003-2007 5.9L
- 2 piece; T4 turbo mounting flange;
- Exhaust Manifold withT4 Flange - Dodge 2003-2007 5.9L
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- T4 mount with fully divided pulse manifold design
- Designed for Borg Warner SX-E T4 installs on the Cummins 5.9 and 6.7
- Cast from High-silicon ductile iron which is designed to withstand extreme temperatures and vibration
- Precision connection joint allows for expansion and contraction, preventing cracks and exhaust leaks
- Quicker turbo spool up with reduced back-pressure and increased power
- Pre-drilled for pyrometer probes
- Gaskets are available separately (1045986-T4)
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- Factory heat shield must be removed;
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Cummins 20-degree Wastegated T6 Exhaust Manifold Dodge 1998.5-2007 5.9L
- T6 Turbo Mount Flange; 45mm Wastegate capped port;
- BD Cummins 20-degree Wastegated T6 Exhaust Manifold Dodge/RAM 1998.5-2007 5.9L
- Wastegated Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045996-wgk
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket, Bolt and Spacers kits are available separately
- Better cylinder exhaust evacuation to keep EGTs down
- Combustion Pulse remains constant with the W/G valve closed
- Machined for use with 45mm Hyper Gate or Turbo Smart
- Block off plate and clamp provided
- Gate port area is 1.67 sq. in. - 33% of T4 / 12% of T6 inlet
- Improves turbo response
- Protect your turbocharger with a performance manifold designed with a waste gate in mind. Cast and machined wastegate port completely divides the manifold into two sections to retain the divided pulse manifold flow. Internal geometry is optimized through Computational Fluid Dynamics (CFD), which increases flow throughout the RPM band for your high flowing T4 of T6 based turbo. Thick-wall cast high silicone ductile iron retains heat energy. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity. 1/8-NPT ports are pre-drilled and tapped.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Exhaust Pulse Manifold w/T6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- T6 Turbo Mount Flange;
- Exhaust Pulse Manifold withT6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket, Bolt and Spacers kits are available separately
- Heavy cast HiSi Ductile Iron retains heat energy
- High temperature black coated
- Drilled and tapped 1/8-NPT ports
- Thick walls allows for drilling/tapping of individual cylinder pyro ports
- Larger runner size helps enhance flow through the manifolds
- Heat expansion joints prevents cracking
- Intended for installation with competition turbos
- Some modifications to vehicle/engine components will be necessary
- No restriction throughout rpm
- Cast ports and runners match inlet gasket within 0.03
- Center Mount can face down or up
- Optimum 20 degree flange helps mounting S400, S500 other larger turbochargers
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 66 products
Loading...