Shop By Product Matching "Exhaust"

Choose your Engine for your 2006 Mazda B3000


Showing 1 - 10 of 17 products
Image
SKU
Product
Rating
Price

Mahle
Additional Fitment Information:
Vehicle
2006 - Mazda B3000

Mahle
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
2006 - Mazda B3000

FelPro
  • EGR/Exhaust Air Supply Gasket
  • FEL-PRO 70149 EGR/Exhaust Air Supply Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
34188, 61-0065, 7413966, AJ03-20-305, E6AZ9D476B, F37Z9D476B, F65Z9D476A, G30625, NCE4774AA, ZZM120305, ZZM220305

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Mazda B3000 V 2986 Valve To Manifold 6 Cyl 3.0L 182

Magnaflow
  • Single Passenger Side Rear Exit
  • Street Series Stainless Cat-Back System
  • Street Series Stainless Cat-Back System
  • Product Attributes:
    • Main Piping Diameter: 2.5
    • Muffler Type: Straight-through
    • Tip Diameter: 3.5
    • Muffler Finish: Satin
    • Tip Finish: Polished
    • Tip Shape: Round
    • Exit Style: Single Passenger Side Rear
    • Tip Type: Welded;single Wall;angle Cut;cut Edge
    • Inlet Connection Type: Bolt-on
    • Subtitle: Cat-back

Additional Fitment Information:
Vehicle Block CC Engine Body CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L Extended Cab Pickup 182

Magnaflow
  • Off Road Pro Series Gas Stainless Cat-Back
  • Turn Down In Front Of Rear Tire Exit
  • Off Road Pro Series Gas Stainless Cat-Back
  • Off-Road Pro Series Gas Stainless Cat-Back
  • Product Attributes:
    • Main Piping Diameter: 2.5
    • Muffler Type: Straight-through
    • Tip Diameter: 3
    • Muffler Finish: Satin
    • Tip Finish: Satin
    • Tip Shape: Round
    • Exit Style: Turndown In Front Of Rear Tire
    • Tip Length: 11
    • Tip Type: Clamp-on;single Wall;turndown;cut Edge
    • Inlet Connection Type: Bolt-on
    • Subtitle: Cat-back

Additional Fitment Information:
Vehicle Block CC Engine Body CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L Extended Cab Pickup 182

MBRP Exhaust
  • 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; 409 Stainless Steel;Meets EPA Standards
  • Armor Plus Cat Back Exhaust System; 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; 409 Stainless Steel;
  • Armor Plus Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • Tip Diameter: 2.500 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Exit Style: Turn Down
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
  • Features:
    • Rugged And Dependable
    • Stands Up To The Harshest Road Conditions
    • Performance Gains That You Can Feel
    • Delivers The Power
    • Bolt On Design
    • Limited Lifetime Warranty
  • RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it.T409 Stainless Steel tubing is easy to clean. If you're looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don't find yourself faced with lots of precipitation and salt, this is all you're ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. Its important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRPs manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L 71.8 182

MBRP Exhaust
  • Armor Plus Cat Back Exhaust System
  • 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; 409 Stainless Steel
  • Armor Plus Cat Back Exhaust System; 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; 409 Stainless Steel;
  • XP Series Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • Tip Diameter: 2.500 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
    • Exit Style: Turn Down
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
  • Features:
    • Rugged And Dependable
    • Stands Up To The Harshest Road Conditions
    • Performance Gains That You Can Feel
    • Delivers The Power
    • Bolt On Design
    • Limited Lifetime Warranty
  • RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it.T409 Stainless Steel tubing is easy to clean. If you're looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don't find yourself faced with lots of precipitation and salt, this is all you're ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. Its important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRPs manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L 71.8 182

MBRP Exhaust
  • 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; Aluminized;Meets EPA Standards
  • Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; Aluminized;
  • Armor Lite Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • Tip Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
    • Exit Style: Turn Down
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Bolt On Design
    • Utilizes OEM Hangers
    • 3 Year Warranty
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L 71.8 182

MBRP Exhaust
  • Armor Lite Cat Back Exhaust System
  • 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; Aluminized
  • Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Extension Pipe/Muffler/Hardware/2.5 in. Tip; Single Side Turn Down Exit; Aluminized;
  • Installer Series Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • Tip Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
    • Exit Style: Turn Down
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Bolt On Design
    • Utilizes OEM Hangers
    • 3 Year Warranty
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L 71.8 182

MBRP Exhaust
  • 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.5 in. OD Tip; Single Side Exit; Aluminized;Meets EPA Standards
  • Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.5 in. OD Tip; Single Side Exit; Aluminized;
  • Armor Lite Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Exit Style: Straight
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Bolt On Design
    • Utilizes OEM Hangers
    • 3 Year Warranty
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length CID
2006 - Mazda B3000 V 2986 6 Cyl 3.0L 71.8 182
Showing 1 - 10 of 17 products

Loading...