Shop By Product Matching "FX45"
Choose your Engine for your 1978 GMC K25
Image
Product
Price
- FRAM, PH5, Oil Filter
- With anti-drain back valve Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 3.140
- Non Slip Grip: Yes
- Gasket Thickness: 0.250
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 230.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Grade: Advanced
- Gasket Outside Diameter: 3.563
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
05579680, 05715388, 1-13, 102, 1025280-M91, 104, 1060, 1061, 1146873-3, 13, 132, 1350-5061, 14957, 162, 17-1729-4, 173233, 18-7876, 19210338...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - GMC K25 | V | - | 8 Cyl 5.0L | 305 |
- W/A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1468
- 57.81
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1448
- 57
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0035591800, 0035591892, 0075221958, 0215411, 03-02-639-6, 0302730, 0320432, 0341848, 0403574, 071058, 10-01940, 10568, 10570, 10A1450, 11340, 11502127, 11502257, 11518...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - GMC K25 | L | - | Fan, Power Steering and Air Pump | GAS | 6 Cyl 4.1L | 250 |
- Standard; 153/168 Tooth Flywheel; 250 ft./lbs Torque; 18:1 Compression Rate; 4.4:1 Gear Reduction; Straight Mount
- Ultra Torque Starter; Standard; 153/168 Tooth Flywheel; 250 ft./lbs Torque; 18:1 Compression Rate; 4.4:1 Gear Reduction; Straight Mount;
- Ultra Torque Starter
-
Features:
- 2.5 KW/3.4 HP
- Up to 18:1 Compression
- Clears Most Headers and Oil Pans
- Can Be Inverted w/Solenoid Down
- 4 Position Rotation
- Great for Big Cubic Inch Engines
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 4 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - GMC K25 | V | - | 8 Cyl 5.0L | 305 |
Showing 1 - 3 of 3 products
Loading...