Shop By Product Matching "FX45"
Image
Product
Price
- NGK Laser Iridium High Ignitability Spark Plug
- Gap 0.044" OE Equivalent Design; OE Spark Plug Is High Ignitability. For Optimal Performance, Replace With High Ignitability Spark Plugs. 105,000 mi OE Mfr Recommended Service Interval
- Laser Iridium High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Dilkar7b11
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Dilkar7b11
- Resistor Type: Yes
- Stock Number: 1406
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.01
- 51.0
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
- DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1406, 22401 EZ37C, 22401-1LA1C, 22401-1LA7C, 3442, 4712, 9693, FXE22HR11, IXEH22TT
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Infiniti FX35 | V | 3498 | 6 Cyl 3.5L | - |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 7440 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-6
- Average Rated Life: 300
- Voltage: 12.000
- Wattage: 21.000
- Filament Quantity: 1
- Amperage Rating: 1.750
- Brightness: 36.600
- Bulb Base Type: Single Contact Wedge
- Bulb Type: T-6 Bulb 3/4 (19mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Infiniti FX35 | Rear |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 7440 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-6
- Average Rated Life: 300
- Voltage: 12.000
- Wattage: 21.000
- Filament Quantity: 1
- Amperage Rating: 1.750
- Brightness: 36.600
- Bulb Base Type: Single Contact Wedge
- Bulb Type: T-6 Bulb 3/4 (19mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
13503356, 13584303, 15821754, 2626189940, 2626189943, 2626189946, 2626189949, 2626189961, 2626189970, 33303S2R901, 33303S30003, 33303SL4003, 33303TZ5A01, 3M7Z13466A, 5PW833310000, 7119904756, 7119905328, 7440...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Infiniti FX35 |
- with Outer Race Width 17mm
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Infiniti FX35 | Rear | AWD |
- Includes Inner Bushings
- w/Ball Joint & Bushing
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Infiniti FX35 | Rear Left Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Infiniti FX35 | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 3.7 Liter, with AWD
- This is the transmission mount located at the rear of the engine compartment. The bracket attached to this mount is not included (reuse or order from the dealer).
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Infiniti FX35 | Rear | AWD |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This is the transmission mount located at the rear of the engine compartment. The bracket attached to this mount is not included (reuse or order from the dealer).
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Infiniti FX35 | Rear | AWD |
- Front Rear Suspension Stabilizer Bar Link Kit For INFINITI FX35 QX70 FX50 FX37
- TOR Front Rear Suspension Stabilizer Bar Link Kit For INFINITI FX35 QX70 FX50 FX37 - Left Right Side (Driver Passenger) KTR-104163
- TOR
- Product Attributes:
- WebNameEbay4: For Infiniti Fx35 Qx70 Fx50 Fx37 Front Rear Suspension Stabilizer Bar Link Kit
- ComponentsSummaryRegularWithBrands: 4x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 4x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Tor Suspension Stabilizer Bar Link Kit (both Side) + 2x Rear Tor Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Tor Front Rear Suspension Stabilizer Bar Link Kit Ktr-104163
- ComponentsSummaryShortWithBrands: 4x Tor Link Kit
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Suspension Stabilizer Bar Link Kit (both Side) + 2x Rear Suspension Stabilizer Bar Link Kit (both Side)
- WebNameLong: Tor Front Rear Suspension Stabilizer Bar Link Kit For Infiniti Fx35 Qx70 Fx50 Fx37 - Left Right Side (driver Passenger) Ktr-104163
- WebNameShort: Front Rear Suspension Stabilizer Bar Link Kit For Infiniti Fx35 Qx70 Fx50 Fx37 Ktr-104163
- ComponentsSummaryRegular: 4x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Tor Front Rear Suspension Stabilizer Bar Link Kit For Infiniti Fx35 Qx70 Fx50 Fx37 - Left Right Side (driver Passenger) Ktr-104163
- WebNameEbay2: [front+rear] Suspension Stabilizer Bar Link Kit For Infiniti Fx35 Qx70 Fx50 Fx37
- WebNameEbay3: Suspension Stabilizer Bar Link Front Rear Kit For Infiniti Fx35 Qx70 Fx50 Fx37
- WebNameEbay: Front Rear Suspension Stabilizer Bar Link Kit For Infiniti Fx35 Qx70 Fx50 Fx37
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK750401 SL61171XL SL61171PR SL61171 GS30885 MS30885 K750401 2653155 TK750401
- Kit Includes: 2x Front Suspension Stabilizer Bar Link Kit (Both Side) + 2x Rear Suspension Stabilizer Bar Link Kit (Both Side)
- Part Reference Numbers : BK750401 SL61171XL SL61171PR SL61171 GS30885 MS30885 K750401 2653155 TK750401 BK750402 SL61172XL SL61172PR SL61172 GS30886 MS30886 K750402 2653156 TK750402 BK750703 SL61521XL SL61521PR SL61521 GS30887 MS30887 K7507
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2653152, 2653153, 2653155, 2653156, 534-077, 534-082, 545-1869, 545-1870, K750401, K750402, K750702, K750703, MS30885, MS30886, MS30887, MS30888, N/A, SL61521...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Infiniti FX35 | Front and Rear |
- Front Disc Brake Rotors And Ceramic Pads Kit For INFINITI FX35 FX45 FX37 QX70
- CMX Front Disc Brake Rotors And Ceramic Pads Kit For INFINITI FX35 FX45 FX37 QX70 K8C-100164
- CMX Rotors And CMX
- Product Attributes:
- WebNameEbay4: For Infiniti Fx35 Fx45 Fx37 Qx70 Front Disc Brake Rotors And Ceramic Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Cmx Disc Brake Rotor, 1x Cmx Brake Pad Set
- ComponentsSummaryShort: 2x Disc Rotor 1x Brake Pad
- ComponentsSummaryLongWithBrands: 2x Front Cmx Disc Brake Rotor (both Side) + 1x Front Ceramic Cmx Brake Pad Set (hardware Included)
- WebNamePlain: Cmx Front Disc Brake Rotors And Ceramic Pads Kit K8c-100164
- ComponentsSummaryShortWithBrands: 2x Cmx Disc Rotor 1x Cmx Brake Pad
- NumberOfPieces: 3
- ComponentsSummaryLong: 2x Front Disc Brake Rotor (both Side) + 1x Front Ceramic Brake Pad Set (hardware Included)
- WebNameLong: Cmx Front Disc Brake Rotors And Ceramic Pads Kit For Infiniti Fx35 Fx45 Fx37 Qx70 K8c-100164
- WebNameShort: Front Disc Brake Rotors And Ceramic Pads Kit For Infiniti Fx35 Fx45 Fx37 Qx70 K8c-100164
- ComponentsSummaryRegular: 2x Disc Brake Rotor, 1x Brake Pad Set
- WebNameRegular: Cmx Front Disc Brake Rotors And Ceramic Pads Kit For Infiniti Fx35 Fx45 Fx37 Qx70 K8c-100164
- WebNameEbay2: [front] Disc Brake Rotors And Ceramic Pads Kit For Infiniti Fx35 Fx45 Fx37 Qx70
- WebNameEbay3: Disc Brake Rotors And Ceramic Pads Front Kit For Infiniti Fx35 Fx45 Fx37 Qx70
- WebNameEbay: Front Disc Brake Rotors And Ceramic Pads Kit For Infiniti Fx35 Fx45 Fx37 Qx70
-
Features:
- Exclusive CeramiX™ High-Density Ceramic compound provides optimal braking performance (Stable Friction, High Temperature Stability, Extended Lifetime Durability) while maintaining low dust and noise
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- Rubberized Multi-Layer Stainless Steel Shim reduces noise, vibration, and harshness for complete quietness
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to increase durability
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Kit Includes: 2x Front Disc Brake Rotor (Both Side) + 1x Front Ceramic Brake Pad Set (Hardware Included)
- Kit Variations: K8A-104640 K8F-100501 K8S-100531 K8T-100540 KDA-100153 KDC-100145 KDF-100758 KDS-100683 KDT-100781 KGA-100314 KGC-100124 KGF-100378 KGS-100382 KGT-100406
- Part Reference Numbers : AG31475 CR31475 PR31475 31475 YH200440C YH200440 120.42092 121.42092 BR900420 NI-4016 248880574 48880574 748880574 900420 Q31475 980574 BD180159 8221 7766 SG7766X PF7766X AD7766 QE7766X SS7766X UP7766X D888 888
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Infiniti FX35 | Front |
Showing 1 - 10 of 10 products
Loading...