Shop By Product Matching "FX45"
Choose your Submodel for your 2011 Mitsubishi Lancer
Image
Product
Price
- Front Disc Brake Rotor For Mitsubishi Jeep RVR Outlander Patriot Lancer Dodge
- CMX Front Disc Brake Rotor 8-780459 For Mitsubishi Jeep RVR Outlander Patriot Lancer Dodge Chrysler Compass Eclipse Cross 200 Caliber Avenger Sebring Sport - (1 piece only) Left or Right Side
- CMX Rotor
- Product Attributes:
- WebNameEbay4: For Mitsubishi Jeep Rvr Outlander Patriot Lancer Front Disc Brake Rotor 8-780459
- Grade Type: Regular
- ComponentsSummaryLongWithBrands: 1x Front Cmx Disc Brake Rotor
- WebNamePlain: Cmx Front Disc Brake Rotor 8-780459
- ComponentsSummaryShortWithBrands: Cmx Disc Brake Rotor
- ABS Sensor Ring Included: No
- ComponentsSummaryLong: 1x Front Disc Brake Rotor
- Nominal Thickness: 26
- Hat Finish: Regular
- WebNameShort: Front Disc Brake Rotor 8-780459 For Mitsubishi Jeep Rvr Outlander Patriot Lancer Dodge Chrysler 200
- WebNameEbay: Front Disc Brake Rotor For Mitsubishi Jeep Rvr Outlander Patriot Lancer Dodge
- Slotted: No
- Bolt Circle Diameter: 114.3
- Bolt Hole Quantity: 5
- ComponentsSummaryRegularWithBrands: Cmx Disc Brake Rotor
- ComponentsSummaryShort: Disc Brake Rotor
- NumberOfPieces: 1
- Rust Resistant Coating: No
- WebNameLong: Cmx Front Disc Brake Rotor 8-780459 For Mitsubishi Jeep Rvr Outlander Patriot Lancer Dodge Chrysler Compass Eclipse Cross 200 Caliber Avenger Sebring Sport - (1 Piece Only) Left Or Right Side (driver Passenger)
- Surface Type: Smooth
- Construction: Full Cast
- ComponentsSummaryRegular: Disc Brake Rotor
- WebNameRegular: Cmx Front Disc Brake Rotor 8-780459 For Mitsubishi Jeep Rvr Outlander Patriot Lancer Dodge Chrysler Compass Eclipse Cross 200 Caliber Avenger Sebring Sport - (1 Piece Only) Left Or Right Side
- Discard Thickness: 24.4
- WebNameEbay2: [front] Disc Brake Rotor 8-780459 For Mitsubishi Jeep Rvr Outlander Patriot 200
- WebNameEbay3: Disc Brake Rotor Front 8-780459 For Mitsubishi Jeep Rvr Outlander Patriot Lancer
-
Features:
- Make sure to buy two (2)! (One for left side and one for right side)
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Thickness and Metallurgy electronically validated for manufacturing consistency
- Best matched with CMX, TEC, SIM or PPF brake pads
- Covered with Corrosion Inhibiting Oil (CIO) for transport and storage. Must be cleaned with disc brake cleaner to remove oil before installation
- Part Reference Numbers : AC53038 AG53038 CR53038 PR53038 53038 YH145706C YH145706 120.63067 121.63067 SEE BR31346 53235 248880459 48880459 748880459 SEE 126335 Q53038 780459 981036 BD126509
- As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
53038, 53235, 748880459, 780459, 981036, SEE 126335, YH145706
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front | GT |
- Front Right Complete Shock Assembly And TOR Link Kit For Mitsubishi Lancer
- Excludes GTS, Evolution and Ralliart Models
- Transit Auto Front Right (Passenger Side) Complete Shock Assembly And TOR Link Kit For Mitsubishi Lancer Excludes GTS Evolution Ralliart Models KSS-105045
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Mitsubishi Lancer Front Right Complete Shock Assembly And Tor Link Kit
- ComponentsSummaryRegularWithBrands: 1x Unity Automotive Suspension Strut And Coil Spring Assembly, 1x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 1x Complete Strut 1x Link Kit
- ComponentsSummaryLongWithBrands: 1x Front Unity Automotive Suspension Strut And Coil Spring Assembly + 1x Front Tor Suspension Stabilizer Bar Link Kit
- WebNamePlain: Transit Auto Front Right (passenger Side) Complete Shock Assembly And Tor Link Kit Kss-105045
- ComponentsSummaryShortWithBrands: 1x Unity Complete Strut 1x Tor Link Kit
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Suspension Strut And Coil Spring Assembly + 1x Front Suspension Stabilizer Bar Link Kit
- WebNameLong: Transit Auto Front Right (passenger Side) Complete Shock Assembly And Tor Link Kit For Mitsubishi Lancer Excludes Gts Evolution Ralliart Models Kss-105045
- WebNameShort: Front Right Complete Shock Assembly And Tor Link Kit For Mitsubishi Lancer Kss-105045
- ComponentsSummaryRegular: 1x Suspension Strut And Coil Spring Assembly, 1x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Transit Auto Front Right (passenger Side) Complete Shock Assembly And Tor Link Kit For Mitsubishi Lancer Excludes Gts Evolution Ralliart Models Kss-105045
- WebNameEbay2: [front Right] Complete Shock Assembly And Tor Link Kit For Mitsubishi Lancer
- WebNameEbay3: Complete Shock Assembly And Tor Link Front Right Kit For Mitsubishi Lancer
- WebNameEbay: Front Right Complete Shock Assembly And Tor Link Kit For Mitsubishi Lancer
-
Features:
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle's weight
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- Kit Includes: 1x Front Unity Automotive Suspension Strut and Coil Spring Assembly + 1x Front TOR Suspension Stabilizer Bar Link Kit
- Kit Variations: KSS-104839
- Part Reference Numbers : 1331664R 2331664R SR4565 182355 282355 172355 272355 90201281R 90201307R 822221 13042 W1331664R BK750385 BK80258 SL65105PR SL65105XL SL65105 MS80822 GK80258 GS25812 GS80822 MK80258 MS25812 K80258 K750385 1880258 26
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
13042, 1331664R, 172355, 182355, 2331664R, 2651620, 272355, 282355, K750385, MS80822, N/A, SEE, SR4565
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front Right | DE |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.37
- 60.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 3.15
- 80
- Stud/Lug Hole Quantity: 5
- Nominal Thickness:
- 0.39
- 9.9
- Discard Thickness:
- 0.33
- 8.4
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
05105515AA, 08.A114.30, 120.63066, 121.63066, 126.63066SL, 126.63066SR, 127.63066CL, 127.63066CR, 127.63066L, 127.63066R, 128.63066CL, 128.63066CR, 128.63066L, 128.63066R, 14-53036, 1407-79993, 145672, 16011437...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Rear | ES Sportback |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.796
- 45.6
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.511
- 13
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.717
- 69
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.027
- 26.1
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.961
- 24.4
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
05105513AA, 09.N203.10, 120.63068, 121.63068, 126.63068SL, 126.63068SR, 127.63068CR, 127.63068L, 127.63068R, 128.63068CL, 128.63068CR, 128.63068L, 128.63068R, 14-53037, 20-53037, 2053037, 320.63068, 321.63068...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front | ES Sportback |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.799
- 45.7
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.511
- 13
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.717
- 69
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.028
- 26.1
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.961
- 24.4
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
05105514AA, 09.A637.10, 120.63067, 120.63067CRY, 121.63067, 126.63067CSL, 126.63067CSR, 126.63067SL, 126.63067SR, 14-53038, 16011438, 20-53038, 2053038, 227.63067L, 227.63067R, 320.63067, 326251, 43153...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mitsubishi Lancer | Front |
- Air/Fuel Sensor 5 Wire, Direct Fit, Heated, Wire Length: 40.55
- Excludes Calif. O.E. Quality Direct Fit Replacement Sensor
- Air / Fuel Ratio Sensor - OE Style
- Product Attributes:
- Sensor Type: Wide-band
- Connector Gender: Male
- Grade Type: Standard Replacement
- Wiring Harness Length: 40.55
- Thread Diameter: 0.711
- Wire Quantity: 5
- DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement… and a first time fit.; DENSO gives you the right part and the right fit… the first time.
This Part Fits the Following OEM/Substitute Numbers:
1588A228, 18076, 2345051, 24399, 250-25083, 350-35036
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2011 - Mitsubishi Lancer | Upstream | Naturally Aspirated |
- Brake Hose Lock
- 1 In. Diameter Package Quantity: 1
- Product Attributes:
- Color/Finish:
- Plateado
- Silver
- Inside Diameter (in):
- 0.01 In
- 0.01 In.
- Diámetro interior (in): 0.01 In.
- Contenidos del paquete: Bloqueo De La Manguera Del Freno
- Material:
- Acero Al Carbono
- Carbon Steel
- Color/Finish:
-
Features:
- Direct replacement - this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
1457, F3052S, H1457, H1457-2, H14572, H1457DP, H1457K, H3052S
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2011 - Mitsubishi Lancer | L | 1998 | Front | 4 Cyl 2.0L | DE | 122 |
- Rear Disc Brake Rotor For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass
- CMX Rear Disc Brake Rotor 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring - (1 piece only) Left or Right Side (Driver Passenger)
- CMX Rotor
- Product Attributes:
- WebNameEbay4: For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Rear Disc Brake Rotor 8-780457
- Grade Type: Regular
- ComponentsSummaryLongWithBrands: 1x Rear Cmx Disc Brake Rotor
- WebNamePlain: Cmx Rear Disc Brake Rotor 8-780457
- ComponentsSummaryShortWithBrands: Cmx Disc Brake Rotor
- ABS Sensor Ring Included: No
- ComponentsSummaryLong: 1x Rear Disc Brake Rotor
- Hat Finish: Regular
- WebNameShort: Rear Disc Brake Rotor 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass 200 Caliber
- WebNameEbay: Rear Disc Brake Rotor For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass
- Slotted: No
- Bolt Circle Diameter: 114.3
- Bolt Hole Quantity: 5
- ComponentsSummaryRegularWithBrands: Cmx Disc Brake Rotor
- ComponentsSummaryShort: Disc Brake Rotor
- NumberOfPieces: 1
- Rust Resistant Coating: No
- WebNameLong: Cmx Rear Disc Brake Rotor 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring - (1 Piece Only) Left Or Right Side (driver Passenger)
- Surface Type: Smooth
- Construction: Full Cast
- ComponentsSummaryRegular: Disc Brake Rotor
- WebNameRegular: Cmx Rear Disc Brake Rotor 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring - (1 Piece Only) Left Or Right Side (driver Passenger)
- Discard Thickness: 8.4
- WebNameEbay2: [rear] Disc Brake Rotor 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge 200
- WebNameEbay3: Disc Brake Rotor Rear 8-780457 For Jeep Mitsubishi Lancer Patriot Dodge Chrysler
-
Features:
- Make sure to buy two (2)! (One for left side and one for right side)
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Thickness and Metallurgy electronically validated for manufacturing consistency
- Best matched with CMX, TEC, SIM or PPF brake pads
- Covered with Corrosion Inhibiting Oil (CIO) for transport and storage. Must be cleaned with disc brake cleaner to remove oil before installation
- Part Reference Numbers : AC53036 AG53036 CR53036 PR53036 53036 YH145672C YH145672 120.63066 121.63066 BR900334 BR900600 53236 248880457 48880457 748880457 900334 Q53036 780457 BD126539
- As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
53036, 53236, 748880457, 780457, 900334, YH145672
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Rear | ES |
- Front Disc Brake Rotor For Mitsubishi Lancer Dodge Caliber 8-780458
- CMX Front Disc Brake Rotor 8-780458 For Mitsubishi Lancer Dodge Caliber - (1 piece only) Left or Right Side (Driver Passenger)
- CMX Rotor
- Product Attributes:
- WebNameEbay4: For Mitsubishi Lancer Dodge Caliber Front Disc Brake Rotor 8-780458
- Grade Type: Regular
- ComponentsSummaryLongWithBrands: 1x Front Cmx Disc Brake Rotor
- WebNamePlain: Cmx Front Disc Brake Rotor 8-780458
- ComponentsSummaryShortWithBrands: Cmx Disc Brake Rotor
- ABS Sensor Ring Included: No
- ComponentsSummaryLong: 1x Front Disc Brake Rotor
- Nominal Thickness: 26
- Hat Finish: Regular
- WebNameShort: Front Disc Brake Rotor 8-780458 For Mitsubishi Lancer Dodge Caliber
- WebNameEbay: Front Disc Brake Rotor For Mitsubishi Lancer Dodge Caliber 8-780458
- Slotted: No
- Bolt Circle Diameter: 114.3
- Bolt Hole Quantity: 5
- ComponentsSummaryRegularWithBrands: Cmx Disc Brake Rotor
- ComponentsSummaryShort: Disc Brake Rotor
- NumberOfPieces: 1
- Rust Resistant Coating: No
- WebNameLong: Cmx Front Disc Brake Rotor 8-780458 For Mitsubishi Lancer Dodge Caliber - (1 Piece Only) Left Or Right Side (driver Passenger)
- Surface Type: Smooth
- Construction: Full Cast
- ComponentsSummaryRegular: Disc Brake Rotor
- WebNameRegular: Cmx Front Disc Brake Rotor 8-780458 For Mitsubishi Lancer Dodge Caliber - (1 Piece Only) Left Or Right Side (driver Passenger)
- Discard Thickness: 24.4
- WebNameEbay2: [front] Disc Brake Rotor 8-780458 For Mitsubishi Lancer Dodge Caliber
- WebNameEbay3: Disc Brake Rotor Front 8-780458 For Mitsubishi Lancer Dodge Caliber
-
Features:
- Make sure to buy two (2)! (One for left side and one for right side)
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Thickness and Metallurgy electronically validated for manufacturing consistency
- Best matched with CMX, TEC, SIM or PPF brake pads
- Covered with Corrosion Inhibiting Oil (CIO) for transport and storage. Must be cleaned with disc brake cleaner to remove oil before installation
- Part Reference Numbers : AC53037 AG53037 CR53037 PR53037 53037 YH145705C YH145705 120.63068 121.63068 BR900596 BR900610 53234 248880458 48880458 748880458 900610 Q53037 780458 BD126571
- As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
53037, 53234, 748880458, 780458, 900610, YH145705
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front | ES |
- Raybestos Element 3
- Product Attributes:
- Overall Height:
- 2.37
- 60.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.495
- 12.55
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 3.15
- 80
- Stud/Lug Hole Quantity: 5
- Nominal Thickness:
- 0.39
- 9.9
- Discard Thickness:
- 0.33
- 8.4
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
05105515AA, 08.A114.30, 120.63066, 121.63066, 126.63066SL, 126.63066SR, 127.63066CL, 127.63066CR, 127.63066L, 127.63066R, 128.63066CL, 128.63066CR, 128.63066L, 128.63066R, 14-53036, 1407-79993, 145672, 16011437...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Rear | ES Sportback |
Showing 1 - 10 of 541 products
Loading...