Shop By Product Matching "Fit"

Choose your Engine for your 1979 GMC P1500


Showing 1 - 10 of 14 products
Image
SKU
Product
Rating
Price

Proform
  • Fits BB Chevy Engines
  • Electric Engine Water Pump; Aluminum;Fits BB Chevy Engines; Finish:Black
  • Sold Individually
  • Product Attributes:
    • Rotation: Standard
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • Impeller Vane Quantity: 1
    • Make: Chevrolet
    • Finish: Black
    • Outlet Quantity: 1
    • Hub Height: 7
    • Category: Water Pumps
    • Installation Warnings: No
    • Applications: Chevy Big Block Engines
    • Hub Hole Quantity: 1
    • Impeller Rotation: Standard
    • Pulley Included: No
    • Hub Hole Thread Size: 1 Ntp
    • Feature/Benefit: The New Chevy Big-block Electric Water Pump Features A Durable 12-volt Motor Pumping Up To 35+ Gallons Of Water Per Minute.
    • Engine: Chevy Big Block
    • Flow Rate: 35 Gpm
    • Pump Flow: 35 Gpm
    • Hub Hole Thread Diameter: 1
    • Includes Back Housing: Yes
    • Mounting Hole Quantity: 4
    • Water Pump Drive Type: Electric
    • Thermostat And Housing Included: No
    • Condition: New
    • Impeller Material: Aluminum
  • The new Chevy big-block electric water pump features a durable 12-volt motor pumping up to 35+ gallons of water per minute. Each pump is made from durable but light-weight die-cast aluminum with epoxy powder coating for corrosion resistance. Comes with FREE billet aluminum inlet fitting, and mating weather-tight connector. Draws 6 amps.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits BB Chevy Engines
  • Electric Engine Water Pump Aluminum Fits BB Chevy Engines Finish: Black
  • Sold Individually
  • Product Attributes:
    • Rotation: Standard
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • Impeller Vane Quantity: 1
    • Make: Chevrolet
    • Finish: Black
    • Outlet Quantity: 1
    • Hub Height: 7
    • Category: Water Pumps
    • Installation Warnings: No
    • Applications: Chevy Big Block Engines
    • Hub Hole Quantity: 1
    • Impeller Rotation: Standard
    • Pulley Included: No
    • Hub Hole Thread Size: 1 Ntp
    • Feature/Benefit: The New Chevy Big-block Electric Water Pump Features A Durable 12-volt Motor Pumping Up To 35+ Gallons Of Water Per Minute.
    • Engine: Chevy Big Block
    • Flow Rate: 35 Gpm
    • Pump Flow: 35 Gpm
    • Hub Hole Thread Diameter: 1
    • Includes Back Housing: Yes
    • Mounting Hole Quantity: 4
    • Water Pump Drive Type: Electric
    • Thermostat And Housing Included: No
    • Condition: New
    • Impeller Material: Aluminum
  • The new Chevy big-block electric water pump features a durable 12-volt motor pumping up to 35+ gallons of water per minute. Each pump is made from durable but light-weight die-cast aluminum with epoxy powder coating for corrosion resistance. Comes with FREE billet aluminum inlet fitting, and mating weather-tight connector. Draws 6 amps.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits GM Applications 73 to 89
  • High-Performance
  • Sold Each
  • Product Attributes:
    • Category: Distributors
    • Feature/Benefit: Engineered With Low Saturation For Maximum Spark Intensity
    • Applications: All Gm Applications 1973 To1989
    • Make: Gm
  • Engineered with low saturation for maximum spark intensity

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 L - 6 Cyl 4.8L 292

Proform
  • Fits BB Chevy
  • Stamped Steel;Chrome; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Tall
  • Sold As One Pair
  • Product Attributes:
    • Emblem: Chevrolet & Bowtie Emblem
    • Grade Type: Premium
    • Mounting Hardware Included: No
    • Grommets Included: Yes
    • Oil Filler Cap Included: No
    • Make: Chevrolet
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Hold Down Tabs Included: No
    • Finish: Chrome
    • Contains Oil Baffles: Yes
    • Category: Valve Covers
    • Cylinder Head Type: Ohv
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Material:
      • Stamped Steel
      • Steel
    • PCV Grommet Included: Yes
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Engine: Chevy Big Block
    • Breather Grommet Included: Yes
    • Valve Cover Gasket Included: No
    • Valve Cover Height: Tall
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Mounting Location: Perimeter
    • Baffeled: Yes
    • Surface Type: Logo
    • Construction: Stamped
    • Material Thickness:
      • 0.125
      • 3
    • Breather Cap Included: No
    • Emblem Style: Recessed Red & Black Emblem
    • Mounting Bolt(s) Included: No
    • Inside Clearance Height:
      • 3.625
      • 92
    • Sheen Level: High Gloss
    • Valve Cover Type: Tall
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits BB Chevy
  • Stamped Steel Chrome with Bowtie Logo Fits BB Chevy Mounting Bolt(s) Included: No Emblem Style: Recessed Red and Black Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Tall
  • Sold As One Pair
  • Product Attributes:
    • Emblem: Chevrolet & Bowtie Emblem
    • Grade Type: Premium
    • Mounting Hardware Included: No
    • Grommets Included: Yes
    • Oil Filler Cap Included: No
    • Make: Chevrolet
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Hold Down Tabs Included: No
    • Finish: Chrome
    • Contains Oil Baffles: Yes
    • Category: Valve Covers
    • Cylinder Head Type: Ohv
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Material:
      • Stamped Steel
      • Steel
    • PCV Grommet Included: Yes
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Engine: Chevy Big Block
    • Breather Grommet Included: Yes
    • Valve Cover Gasket Included: No
    • Valve Cover Height: Tall
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Mounting Location: Perimeter
    • Baffeled: Yes
    • Surface Type: Logo
    • Construction: Stamped
    • Material Thickness:
      • 0.125
      • 3
    • Breather Cap Included: No
    • Emblem Style: Recessed Red & Black Emblem
    • Mounting Bolt(s) Included: No
    • Inside Clearance Height:
      • 3.625
      • 92
    • Sheen Level: High Gloss
    • Valve Cover Type: Tall
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits BB Chevy
  • Sold As One Pair
  • Product Attributes:
    • Emblem: Chevrolet & Bowtie Emblem
    • Grade Type: Premium
    • Mounting Hardware Included: No
    • Grommets Included: Yes
    • Oil Filler Cap Included: No
    • Make: Chevrolet
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Hold Down Tabs Included: No
    • Finish: Chrome
    • Contains Oil Baffles: Yes
    • Category: Valve Covers
    • Cylinder Head Type: Ohv
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Material:
      • Stamped Steel
      • Steel
    • PCV Grommet Included: Yes
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Engine: Chevy Big Block
    • Breather Grommet Included: Yes
    • Valve Cover Gasket Included: No
    • Valve Cover Height: Tall
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Mounting Location: Perimeter
    • Baffeled: Yes
    • Surface Type: Logo
    • Construction: Stamped
    • Material Thickness:
      • 0.125
      • 3
    • Breather Cap Included: No
    • Emblem Style: Recessed Red & Black Emblem
    • Mounting Bolt(s) Included: No
    • Inside Clearance Height:
      • 3.625
      • 92
    • Sheen Level: High Gloss
    • Valve Cover Type: Tall
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Engine Engine VIN CID
1979 - GMC P1500 V - OHV 8 Cyl 7.4L S 454

Proform
  • Fits Chevy V8-V6 Engines
  • High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
  • Sold Each
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio:
      • 11.0:1
      • 3.75:1
    • Grade Type: Performance
    • Feature/Benefit: High-torque, Gear-reduction Design.
    • Compression Ratio: 11 : 1
    • Nose Cone Type: Open Nose
    • Make: Chevrolet
    • Family: Mini Hitachi
    • Finish: Natural
    • Category: Starters
    • Power Output: 1.4 Kw
    • Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
    • Mounting Plate: Straight Bolt Mounting Plate
    • Solenoid Attached: Yes
    • Flywheel Tooth Number: 153 & 168-tooth
    • Mounting Type: Flange
    • Material: Aluminum/steel
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits Chevy V8-V6 Engines
  • High-Torque Starter Gear Reduction Type 1.4KW Compression Ratio: 11:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
  • Sold Each
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio:
      • 11.0:1
      • 3.75:1
    • Grade Type: Performance
    • Feature/Benefit: High-torque, Gear-reduction Design.
    • Compression Ratio: 11 : 1
    • Nose Cone Type: Open Nose
    • Make: Chevrolet
    • Family: Mini Hitachi
    • Finish: Natural
    • Category: Starters
    • Power Output: 1.4 Kw
    • Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
    • Mounting Plate: Straight Bolt Mounting Plate
    • Solenoid Attached: Yes
    • Flywheel Tooth Number: 153 & 168-tooth
    • Mounting Type: Flange
    • Material: Aluminum/steel
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits Chevy V8-V6 Engines
  • High-Torque Starter Stagger Bolt Compression Ratio: 10 : 1 Finish: Silver/Black Flywheel Tooth Number: 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Staggered Bolt Mounting Plate Power Output: 1.7 Kilo Watts
  • Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio: 3.75:1
    • Feature/Benefit: High-torque, Gear-reduction Design.
    • Compression Ratio: 10 : 1
    • Make: Chevrolet
    • Finish: Silver/black
    • Category: Starters
    • Power Output: 1.7 Kilo Watts
    • Applications: Chevy Small Block Engines And Chevy Big Block Engines
    • Mounting Plate: Staggered Bolt Mounting Plate
    • Flywheel Tooth Number: 168-tooth
    • Weight: 8.3 Lbs.
    • Material: Aluminum/steel
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454

Proform
  • Fits Chevy V8-V6 Engines
  • High-Torque Starter; Stagger Bolt; Compression Ratio:10 : 1; Finish:Silver/Black; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.7 Kilo Watts
  • Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio: 3.75:1
    • Feature/Benefit: High-torque, Gear-reduction Design.
    • Compression Ratio: 10 : 1
    • Make: Chevrolet
    • Finish: Silver/black
    • Category: Starters
    • Power Output: 1.7 Kilo Watts
    • Applications: Chevy Small Block Engines And Chevy Big Block Engines
    • Mounting Plate: Staggered Bolt Mounting Plate
    • Flywheel Tooth Number: 168-tooth
    • Weight: 8.3 Lbs.
    • Material: Aluminum/steel
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 - GMC P1500 V - 8 Cyl 7.4L 454
Showing 1 - 10 of 14 products

Loading...