Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Toyota Corolla |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota Corolla | Rear |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota Corolla | Front |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota Corolla | Rear |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota Corolla | Front |
- Easy fit Car Cover, 4 Layer; 14' 1" to 15' Vehicle Lgth; Includes Lock, Cable, Bag
- Universal Easy fit Car Cover 4 Layer; Includes Lock, Cable, and Storage Bag; 14' 1" to 15' Vehicle Length
- Product Attributes:
- Size: 14 Ft. 1 Inch To 15 Ft. Long
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
- Unique Easy fit Car Cover has a 4-layer non-woven polypropylene construction that blocks harmful paint contaminants. With a rugged Spun Bond outer layer attached to two melt blown middle layers of added protection and joined with a softer inner layer to produce a water resistant fabric that protects vehicle finish from the elements while maintaining breath-ability to avoid temperature and moisture build-up under the cover.
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 1986 - Toyota Corolla | DLX | Sedan |
- HM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Hm Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23886
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23886. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1984-1995 Toyota Pickup, 1984-1997 Toyota Corolla, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-11690 and 17410-11700, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-11160, 18450-16050...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | Sport GTS | - |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23893
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23893 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1983-1989 Toyota Corolla and 1985-1988 Chevrolet Nova, this direct-fit catalytic converter also interchanges with OE parts 18450-11100 and 18450-11110, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
18450-11100, 18450-11110, 18450-15021, 18450-15040, 18450-15110, 18450-15120, 18450-16020, 18450-16120, 18450-16330, 18450-16390, 1845011100, 1845011110, 1845015021, 1845015040, 1845015110, 1845015120, 1845016020, 1845016120...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | LE | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23893 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1983-1989 Toyota Corolla and 1985-1988 Chevrolet Nova, this direct-fit catalytic converter also interchanges with OE parts 18450-11100 and 18450-11110, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
18450-11030, 18450-11040, 18450-11080, 18450-11100, 18450-11110, 18450-15021, 18450-15040, 18450-15110, 18450-15120, 18450-16020, 18450-16120, 18450-16180, 18450-16220, 18450-16330, 18450-16390, 1845011100, 1845011110, 1845015021...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | LE | - |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23886. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1984-1995 Toyota Pickup, 1984-1997 Toyota Corolla, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-11690 and 17410-11700, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
17410-02090, 17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-02060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | Sport GTS | - |
Showing 1 - 10 of 10 products
Loading...