Image
Product
Price
- Crankcase Tube Vent Fitting;
- Crankcase Tube Vent Fitting
-
Features:
- Crankcase Tube Vent Fitting
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Jeep Wrangler |
- Electric Fan Kit, Direct Fit
- 2400 CFM
- Electric Fan Kit, Direct Fit
- Jeep YJ and TJ Electric Fan Kit
- Product Attributes:
- Airflow: Puller
- CFM: 2400
- Mounting: 10 X 22-5/8
- Depth: 1-5/8
-
Features:
- Electric Fan Kit, Direct Fit
- This direct fit electric cooling fan assembly is the same as all of our products: the kit comes complete from the factory without the need to spend extra on necessities such as power steering reservoir brackets or coolant recovery tank brackets. Everything you MIGHT need is included, except of course the tools. Leave your drill in your toolbox, you won't need it here. We take a thermostatically-controlled high performance 16" skewed blade electric fan motivated by a 265 watt IP68 certified waterproof/dustproof motor and a laser-cut heavy duty aluminum shroud, along with all necessary brackets, fittings, relay harness, and mounting hardware to create the ultimate direct fit electric fan on the market. Fits ALL 4 and 6 cylinder Jeep Wrangler YJ's and TJ's.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Jeep Wrangler |
- H3;100% Fitment;Compact and Powerful;Patented Thermal Management
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Jeep Wrangler | Front |
- H3;100% Fitment;Compact and Powerful;Patented Thermal Management
- (COMPARE TO ORIGINAL - OPTION 1)
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Jeep Wrangler | Front |
- Remote Transmission Cooler Kit, Complete Kit, Direct Fit
- 16 Row Plate and Fin Complete Kit
- Remote Transmission Cooler Kit, Complete Kit, Direct Fit
- Jeep YJ and TJ Transmission Cooler Kit
- Product Attributes:
- Airflow: Puller (reversible)
- Hose length (feed): 72-1/2
- CFM: 500
- Depth: 5-1/2
- Hose length (return): 82-1/4
-
Features:
- Remote Transmission Cooler Kit, Complete Kit, Direct Fit
- perfect for rock crawling and off road use when airflow is speed limited. Thermostatically controlled fan provides cooling when needed, the entire assembly is frame mounted for strength, requires no drilling for installation and can rotate almost 90° to give it the ability to rotate from a vertical plane for highway and street use to horizontal to tuck it out of harms way when off-roading. Complete kit comes with everything you need for a professional installation except the tools.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Jeep Wrangler |
- Sold In Pairs; C Series; 18 in. x 10.375 in.; 4x4 Logo; Black
- Premier Fit Splashguards; Sold In Pairs; C Series; 18 in. x 10.375 in.; 4x4 Logo; Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- Designed to fit most fender configurations. Popular models and colors provide maximum coverage of market with limited number of SKU's. Molded to original equipment specifications, guards remain flexible down to negative 40 degrees Fahrenheit and will not crack or discolor. Supplied with installation instructions and mounting hardware. Packaged one pair per display card.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Jeep Wrangler | Rear |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23221
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23221 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1993-1995 Jeep Wrangler, 1993-1995 Jeep Cherokee, and more, this direct-fit catalytic converter also interchanges with OE parts 5083 053AB and 52018128, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
5083 053AB, 5083 054AD, 5083053AB, 5083054AD, 5201 7717, 5201 7718, 5201 8128, 5201 8141, 52017718, 52018128, 52018141, 5202 0110, 52020110
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 242 |
- GS900 Series - Custom Fit Grille Bug Screen
- GS900 Series - Custom Fit Grille Bug Screen, with heavy duty tear resistant mesh screen, no drill installation with stick a stud system
- Fia GS900 Series - Custom Fit Bug Grille Screen is made from heavy duty tear resistant mesh. In the spring, summer and fall it protects the grill and radiator from stone chips, bugs, and debris. Quick and easy installation with Fia's patented Stick-A-Stud no drill installation system. Using a 3M adhesive backed stud fastener, just peel and stick to surface and snap on either the bug screen. No tools are required for installation.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Jeep Wrangler |
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen, includes winter front and bug screen, with stick a stud no drill installation system.
- WF920 Series custom fit winter fronts and bug screens are designed to provide benefits in both winter and summer. Made from all weather heavy duty quilted vinyl, the winter front promotes better fuel economy. It aids in providing faster engine warm up and interior heat. It keeps diesel engines at optimal operating temperatures with adjustable air flow doors. In the spring and summer, the bug screen, made from heavy duty tear resistent mesh, protects the rad and grille from bugs, stones and debris. The winter front and bug screen are interchangeable using Fia's patented Stick A Stud no drill installation system. Using a 3M adhesive backed stud fastener, just peel and stick to surface and snap on either the winter front or bug screen. No tools are required for installation. Optional screw on hardware kit included.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Jeep Wrangler |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23221. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1993-1995 Jeep Wrangler, 1993-1995 Jeep Cherokee, and more, this direct-fit catalytic converter also interchanges with OE parts 5083 053AB and 52018128, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
5083 053AA, 5083 053AB, 5083 054AA, 5083 054AB, 5083 054AD, 5083 054AE, 5083053AB, 5083054AD, 5201 7717, 5201 7718, 5201 8128, 5201 8141, 5201 9480AB, 5201 9480AC, 5201 9480AD, 52017717, 52017718, 52018128...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 242 |
Showing 1 - 10 of 11 products
Loading...