Shop By Product Matching "Fit"
Image
Product
Price
- Installation Tool Required
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference: 916
- Instruction Manual Included: Sheet A
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 35.51
- 902
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: Special Installation Tool
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
12603509, 12624100, 19178068, 19210691, 19210961, 2249471, 25-040355SF, 355K4S, 4040355S, 4040394S, 4K355SF, 4PK902F, 4PK926EE, 4PK939 (STRETCH FIT), 8126241000, 8192106910, E040357, EB009...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2009 - Hummer H2 | V | - | Air Conditioning | FLEX | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Gear Reduction Type 1.4KW Compression Ratio: 11:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Stagger Bolt; Compression Ratio:10 : 1; Finish:Silver/Black; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.7 Kilo Watts
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 10 : 1
- Make: Chevrolet
- Finish: Silver/black
- Category: Starters
- Power Output: 1.7 Kilo Watts
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Staggered Bolt Mounting Plate
- Flywheel Tooth Number: 168-tooth
- Weight: 8.3 Lbs.
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Stagger Bolt Compression Ratio: 10 : 1 Finish: Silver/Black Flywheel Tooth Number: 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Staggered Bolt Mounting Plate Power Output: 1.7 Kilo Watts
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 10 : 1
- Make: Chevrolet
- Finish: Silver/black
- Category: Starters
- Power Output: 1.7 Kilo Watts
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Staggered Bolt Mounting Plate
- Flywheel Tooth Number: 168-tooth
- Weight: 8.3 Lbs.
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 15 : 1
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Flywheel Tooth Number: 153 & 168-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Gear Reduction Type 2.2KW Compression Ratio :15:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 15 : 1
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Flywheel Tooth Number: 153 & 168-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Hummer H2 | V | 6162 | 8 Cyl 6.2L | 376 |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 8.510
- Outer Pad Height: 2.640
- Outer Pad Width: 8.510
- FMSI Number: D784-7652
- Inner Pad Height: 2.640
- Inner Pad Overall Thickness: 0.735
- Mounting Hardware Included: Yes
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.735
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0784.20, 0784.80, 102.07840, 103.07840, 103.14110, 104.07840, 105.07840, 106.07840, 108.07840, 14-784-12, 15886468, 15886469, 16-784, 16-784-12, 17-784, 171-0978, 171-621, 171-645...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Hummer H2 | Front |
- Replaces PGD784C
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 8.510
- Outer Pad Height: 2.640
- Outer Pad Width: 8.510
- FMSI Number: D784-7652
- Inner Pad Height: 2.640
- Inner Pad Overall Thickness: 0.735
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.735
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0784.20, 0784.80, 102.07840, 103.07840, 103.14110, 104.07840, 105.07840, 106.07840, 108.07840, 14-784-12, 15886468, 15886469, 16-784, 16-784-12, 17-784, 171-0978, 171-621, 171-645...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Hummer H2 | Front |
- Replaces ATD784C
- Raybestos Specialty - Truck
- Product Attributes:
- Inner Pad Width: 8.510
- Outer Pad Height: 2.640
- Outer Pad Width: 8.510
- FMSI Number: D784-7652
- Inner Pad Height: 2.640
- Inner Pad Overall Thickness: 0.735
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.735
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0784.20, 0784.80, 102.07840, 103.07840, 103.14110, 104.07840, 105.07840, 106.07840, 108.07840, 14-784-12, 15886468, 15886469, 16-784, 16-784-12, 17-784, 171-0978, 171-621, 171-645...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Hummer H2 | Front |
Showing 1 - 10 of 20 products
Loading...