Image
Product
Price
- White
- Under Body Light Kit; White;
- Under Body Light Kit
- Product Attributes:
- Beam Style: Regular
- Housing Color:
- Black
- Chrome
- WARNING CA Proposition 65: No
- Application: Automotive
- Quantity Sold: 1
- Bulb Technology: Oe
- Housing Shape: Oe
-
Features:
- Rigid® Led Rock Lights Plus 15 ft. Leads To Each Light
- Power Distribution Block
- Includes Switch And Light Mounts
- Rigid® Rock Lights Contain A High Quality Black Aluminum Housing
- Ford Performance worked with one of the most recognized names in Off-Road lighting, RIGID(R), to offer Off-Road Light Kits which work with Ford vehicles. These lights are mounted in the wheel well or other strategic locations to enable off-road vehicles to illuminate trails as well as difficult, rocky terrain. This kit contains 4) RIGID(R) LED Rock Lights (Amber Light) plus 15-foot leads to each light, power distribution block, switch, and light mounts. RIGID(R) Rock Lights contain a high quality black aluminum housing with a durable polycarbonate lens. Warning-this part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including those relating to emission requirements and motor vehicle safety standards. In addition, installation of this part may adversely affect the warranty coverage on your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Ford Focus |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.85 HP At 5797 RPM;CARB E.O. D-269-31 Excludes PZEV Eng. Family 5FMXV02.01GB
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.563 In. (141mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 11.85 Hp @ 5797 Rpm
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.000 In. (76mm)
- Replacement Filter: Rx-4990
- Item Weight: 7.100 Lbs. (3.2 Kg)
- Horse Power Increase: 12 Hp
- RPM: 5797
- Product Box Height: 12.500 In. (318mm)
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 3.000 In. (76mm)
- Package Material: Paperboard
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Focus | L | 1999 | 4 Cyl 2.0L | ZX4 | 122 |
- OEM Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- OEM Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Ford Focus | L | - | Rear | 4 Cyl 2.3L | 140 |
- Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 8.46 HP At 5800 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a chrome-like finish.
- Performance Air Intake System
- Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Performance Air Intake System
- The KN 69-3512TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3512TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Focus | L | - | 4 Cyl 2.3L | ZX4 ST | 140 |
- Performance Air Intake System
- Polished; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5800 RPM;CARB E.O. D-269-38 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]~Excludes PZEV Eng. Family 5FMXV02.01GB
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a chrome-like finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 8.46 Hp @ 5800 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Intake Pipe Inlet Length: 28.500 In. (724mm)
- RPM: 5800
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 28.500 In. (724mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Performance Air Intake System
- The KN 69-3512TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3512TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Focus | L | - | 4 Cyl 2.3L | ZX4 ST | 140 |
- Performance Air Intake System
- Red; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5800 RPM;CARB E.O. D-269-38 Excludes PZEV Eng. Family 5FMXV02.01GB~69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 8.46 Hp @ 5800 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Intake Pipe Inlet Length: 28.500 In. (724mm)
- RPM: 5800
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 28.500 In. (724mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-3512TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3512TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Focus | L | - | 4 Cyl 2.3L | ZX4 ST | 140 |
- Amber
- Under Body Light Kit; Amber;
- Under Body Light Kit
- Product Attributes:
- Beam Style: Regular
- Housing Color:
- Black
- Chrome
- WARNING CA Proposition 65: No
- Application: Automotive
- Quantity Sold: 1
- Bulb Technology: Oe
- Housing Shape: Oe
-
Features:
- Rigid® Led Rock Lights Plus 15 ft. Leads To Each Light
- Power Distribution Block
- Includes Switch And Light Mounts
- Rigid® Rock Lights Contain A High Quality Black Aluminum Housing
- Ford Performance worked with one of the most recognized names in Off-Road lighting, RIGID(R), to offer Off-Road Light Kits which work with Ford vehicles. These lights are mounted in the wheel well or other strategic locations to enable off-road vehicles to illuminate trails as well as difficult, rocky terrain. This kit contains 4) RIGID(R) LED Rock Lights (Amber Light) plus 15-foot leads to each light, power distribution block, switch, and light mounts. RIGID(R) Rock Lights contain a high quality black aluminum housing with a durable polycarbonate lens. Warning-this part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including those relating to emission requirements and motor vehicle safety standards. In addition, installation of this part may adversely affect the warranty coverage on your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Ford Focus |
Showing 1 - 8 of 8 products
Loading...