Shop By Product Matching "Ford Performance"
Choose your Submodel for your 2014 Ford Fusion
Image
Product
Price
- White
- Under Body Light Kit; White;
- Under Body Light Kit
- Product Attributes:
- Beam Style: Regular
- Housing Color:
- Black
- Chrome
- WARNING CA Proposition 65: No
- Application: Automotive
- Quantity Sold: 1
- Bulb Technology: Oe
- Housing Shape: Oe
-
Features:
- Rigid® Led Rock Lights Plus 15 ft. Leads To Each Light
- Power Distribution Block
- Includes Switch And Light Mounts
- Rigid® Rock Lights Contain A High Quality Black Aluminum Housing
- Ford Performance worked with one of the most recognized names in Off-Road lighting, RIGID(R), to offer Off-Road Light Kits which work with Ford vehicles. These lights are mounted in the wheel well or other strategic locations to enable off-road vehicles to illuminate trails as well as difficult, rocky terrain. This kit contains 4) RIGID(R) LED Rock Lights (Amber Light) plus 15-foot leads to each light, power distribution block, switch, and light mounts. RIGID(R) Rock Lights contain a high quality black aluminum housing with a durable polycarbonate lens. Warning-this part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including those relating to emission requirements and motor vehicle safety standards. In addition, installation of this part may adversely affect the warranty coverage on your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford Fusion |
- Single Straight Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Straight Passenger Side Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp;u-bolt Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2013-2018 Ford Fusion Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.5L, 1.6L 2013-2018 Ford Fusion with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Fusion exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Fusion's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15229 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15229 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1596 | 4 Cyl 1.6L | 97 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 5.41 HP At 5751 RPM;Not Legal For Sale Or Use In California
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.41 Hp @ 5751 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-1637
- Item Weight: 8.800 Lbs. (4 Kg)
- RPM: 5751
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 0.719 In. (18mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 3
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.250 In. (83mm)
- Horse Power Increase: 5 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1596 | 4 Cyl 1.6L | SE | 97 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.41 HP At 5063 RPM;Off-Road Use Only
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 4.000 In. (102mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 8.41 Hp @ 5063 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-4600
- Item Weight: 6.000 Lbs. (2.7 Kg)
- RPM: 5063
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 8 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1499 | 4 Cyl 1.5L | SE | 91 |
- Performance Air Intake System
- Textured Black; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 6.7 HP At 5929 RPM;CARB E.O. D-269-65
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 4.875 In. (124mm)
- Clamp Style: Mini
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.7 Hp @ 5929 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-9350
- Item Weight: 6.900 Lbs. (3.1 Kg)
- RPM: 5929
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 0.813 In. (21mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 7.000 In. (178mm)
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 7.000 In. (178mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 2488 | 4 Cyl 2.5L | SE | 152 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 10.05 HP At 5185 RPM;Not Legal For Sale Or Use In California
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N 10-Year/Million Mile Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 10.05 Hp @ 5185 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.250 In. (83mm)
- Replacement Filter: Ru-1637
- Item Weight: 8.300 Lbs. (3.8 Kg)
- Horse Power Increase: 10 Hp
- RPM: 5185
- Product Box Height: 12.500 In. (318mm)
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 0.719 In. (18mm)
- Package Material: Paperboard
- Product Box Length: 22.250 In. (565mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1999 | GAS | 4 Cyl 2.0L | Titanium | 9 | Turbocharged | 122 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 10.05 HP At 5185 RPM;CARB E.O. D-269-63
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.438 In. (138mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.05 Hp @ 5185 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-1637
- Item Weight: 8.300 Lbs. (3.8 Kg)
- RPM: 5185
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 0.781 In. (20mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 3
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.250 In. (83mm)
- Horse Power Increase: 10 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1999 | GAS | 4 Cyl 2.0L | Titanium | 9 | Turbocharged | 122 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 10.05 HP At 5185 RPM;CARB E.O. D-269-63 57 Series - High Density Polyethylene Tube w/Heat Shield
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.438 In. (138mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.05 Hp @ 5185 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-1637
- Item Weight: 8.300 Lbs. (3.8 Kg)
- RPM: 5185
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 0.781 In. (20mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 3
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.250 In. (83mm)
- Horse Power Increase: 10 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2014 - Ford Fusion | L | 1999 | GAS | 4 Cyl 2.0L | Titanium | 9 | Turbocharged | 122 |
- Amber
- Under Body Light Kit; Amber;
- Under Body Light Kit
- Product Attributes:
- Beam Style: Regular
- Housing Color:
- Black
- Chrome
- WARNING CA Proposition 65: No
- Application: Automotive
- Quantity Sold: 1
- Bulb Technology: Oe
- Housing Shape: Oe
-
Features:
- Rigid® Led Rock Lights Plus 15 ft. Leads To Each Light
- Power Distribution Block
- Includes Switch And Light Mounts
- Rigid® Rock Lights Contain A High Quality Black Aluminum Housing
- Ford Performance worked with one of the most recognized names in Off-Road lighting, RIGID(R), to offer Off-Road Light Kits which work with Ford vehicles. These lights are mounted in the wheel well or other strategic locations to enable off-road vehicles to illuminate trails as well as difficult, rocky terrain. This kit contains 4) RIGID(R) LED Rock Lights (Amber Light) plus 15-foot leads to each light, power distribution block, switch, and light mounts. RIGID(R) Rock Lights contain a high quality black aluminum housing with a durable polycarbonate lens. Warning-this part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including those relating to emission requirements and motor vehicle safety standards. In addition, installation of this part may adversely affect the warranty coverage on your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford Fusion |
Showing 1 - 9 of 9 products
Loading...