Shop By Product Matching "GF"
Choose your Engine for your 1960 Chevrolet Biscayne
Image
Product
Price
- WIX Fuel Cartridge (Special Type) Filter
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 0.640
- Duty Type: Ld
- Micron: 40.00
- Media Material: Sintered Bronze
- Outer Diameter Bottom: 0.640
- Class: B
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
13, 2224653, 299, 3050, 3087, 33050, 3I1091, 4173, 45163, 5002200277, 52050, 5651689, 5651924, 61633050, 7013404, 73018, 73050, 7457146...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | 5704 | United States | 8 Cyl 5.7L | 348 |
- FRAM, PH30, Oil Filter
- Use if spin-on kit was installed Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 3.140
- Non Slip Grip: Yes
- Gasket Thickness: 0.250
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 230.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Grade: Advanced
- Gasket Outside Diameter: 3.563
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
0681-08746, 1-30, 10-82200, 10006, 1025280-M91, 1035637-M91, 1046, 106, 1069, 11-09948-000, 1146873, 1146873-3, 11468733, 127644, 1681-08746, 17-1735-8, 173232, 18-7824...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | 5704 | 8 Cyl 5.7L | 348 |
- 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style
- Mastertorque Starter; 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style;
- Mastertorque Starter
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Durable Black Wrinkle Finish
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | - | 8 Cyl 4.6L | 283 |
- W/O A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1138
- 44.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1118
- 44
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0059979592, 0106500, 011348, 0117100, 0118600, 012146, 0219489, 027017644, 03-02-223-4, 03-02-392-3, 0403444, 0540743902, 0951113, 0HA3282, 10-01874, 10-446, 102751, 10438...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | - | Fan and Power Steering | GAS | 8 Cyl 4.6L | 283 |
- W/A.C.; 1st Design
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1138
- 44.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1118
- 44
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | - | Fan and Power Steering | GAS | 8 Cyl 4.6L | 283 |
- W/A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1138
- 44.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1118
- 44
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | - | Fan and Power Steering | GAS | 8 Cyl 5.7L | 348 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1049
- 41.33
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1029
- 40.5
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0019975392, 0019976292, 0049923992, 0049973972, 0049973992, 0059975692, 0059979892, 0069971092, 0069979892, 0233632, 027128616Y, 0400217, 0400301, 0406947, 059119137, 059119137A, 076145107, 0951025...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | L | - | Fan and Generator | GAS | 6 Cyl 3.9L | 236 |
Showing 1 - 7 of 7 products
Loading...