Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Dodge Intrepid |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 561 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-8
- Average Rated Life: 1000
- Voltage: 12.800
- Wattage: 12.420
- Filament Quantity: 1
- Amperage Rating: 0.970
- Brightness: 12.000
- Bulb Base Type: Rigid Loop
- Bulb Type: T-3 Bulb 3/8 (9.5mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
21019524, 561, 561CP, 8769401700, 9433040, D1AZ13466A, L0000561
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Dodge Intrepid |
- FRAM, TG16, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: 3/4-16
- Grade: Premium
- Gasket Outside Diameter: 2.797
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 15,000 miles (24,000 kilometers)
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
00120-00005, 00120-00007, 00120-00011, 0128889-1A, 02 04 495, 039306, 041-0743, 041-8060, 041-8092, 041-8096, 041-8098, 041-8148, 041-8159, 041-8160, 041-8731, 041-8749, 050487, 05281090...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Dodge Intrepid | V | 2736 | 6 Cyl 2.7L | 167 |
- FRAM, PH16, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.797
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
00120-00005, 00120-00007, 00120-00011, 0128889-1A, 02 04 495, 039306, 041-0743, 041-8060, 041-8092, 041-8096, 041-8098, 041-8148, 041-8159, 041-8160, 041-8731, 041-8749, 050487, 05281090...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Dodge Intrepid | V | 2736 | 6 Cyl 2.7L | 167 |
Showing 1 - 4 of 4 products
Loading...