Shop By Product Matching "GF"
Image
Product
Price
- Front Lower Suspension Ball Joint
- with OE Steel Knuckles
- MOOG K80149 Front Lower Suspension Ball Joint for Ford F-150
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 1.750
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Ford Expedition | Front Lower |
- Front Lower Suspension Ball Joint
- with OE Steel Knuckles Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation
- MOOG K80149 Front Lower Suspension Ball Joint for Ford F-150
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 1.750
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104298, 104368, 2601584, 2L1Z3050A, 410-34795, 46D2314A, 505-1314, 536-242, 610.65015, BJ85045, BJ85045RD, BJ85045XL, DW-K80149, FA2219, FA80149, GFA80149, GK80149, JBJ1035...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Ford Expedition | Front Lower |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Ford Expedition |
- WIX Fuel (Complete In-Line) Filter
- Original Equipment Part Number 2M5Z9155CA If Shorter Clips Are Required - Order Part # WCK11 separately - Contains Ten "Duckbill" Clips Per Box
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.318
- Duty Type: Ld
- Micron: 10.00
- Media Material: Cellulose
- Class: A
- Outlet: 5/16
- Inlet: 5/16
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 450 905 939, 0431034, 1075138, 1271652GT, 1272019GT, 1465 018, 147082001, 23595, 25-0113, 2M519155AA, 2M5Z9155CA, 31.769.00, 33595, 3595, 3620901, 3964 918, 4244, 4724...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Ford Expedition | V | - | Mexico | 8 Cyl 5.4L | 330 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number F1AZ6731BD Also Available In Master Pack Version Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Capacity: 0.00
- Burst Pressure: 275
- Duty Type: Ld
- Flow Rate: 11-13 Gpm
- Media Material: Synthetic
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 333, 0 451 103 334, 0 986 AF0 068, 0 986 AF1 138, 0 986 AF1 172, 00FE00336, 0410813, 0986627634, 0D5419, 0FE00336, 1000-FL51372, 10028130, 1220841, 1372, 1501014, 1503016, 15426, 159...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Ford Expedition | V | - | Mexico | 8 Cyl 5.4L | 330 |
- Sportz SUV Tent (with screen room)
- Napier Sportz SUV Tent with Screen Room
- The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2006 - Ford Expedition | Sport Utility |
- Sportz SUV Tent (with screen room)
- Napier Sportz SUV Tent with Screen Room
- The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2006 - Ford Expedition | Sport Utility |
- FRAM, PH8A, Oil Filter
- Spin-on Oil Filter 3/4" Thread
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.422
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 230.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Grade: Advanced
- Gasket Outside Diameter: 2.797
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
000-983-0607, 00120-00001, 00120-00012, 02-7088230, 041-0745, 041-8159, 041-8756, 1-5360, 1-829195, 1-8A, 10-00041, 10-00074, 10-00132, 10-00280, 10-00314, 10-00520, 10-00967, 10-50132...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Expedition | V | - | 8 Cyl 5.4L | 330 |
- Front Floor Mats
- Tech Info: Front floor mat set. Driver's side mat attaches to factory carpet hook. Fits all F150 models (not Heritage Edition).
- Heavy Duty Floor Mats - Front Floor Mats
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front Row
- CA Prop 65: Y
- Category: Heavy Duty Floor Mats
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
- The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
- Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You’re welcome.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- UniEdge™ creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs—containing the mess, until you can yank, dump, wash and repeat.
- Our exclusive StayPut Cleats™ help keep your liner from shifting around underfoot like lesser liners.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem, we’ll replace it.
- Proudly made in the USA.
- Our Drivers Heel Pad is made extra thick for added protection from your lead foot.
- It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip™ material stands up to harsh chemicals, while its UniEdge™ and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats™ keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2006 - Ford Expedition | Front | United States |
- Gray; Behind 2nd Row Seating
- Cargo Liner; Gray; Behind 2nd Row Seating;
- Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Complete Trunk/Cargo Area Protection
- Computer Designed To Fit Your Vehicle
- Raised Lip To Keep Spills/Dirt/Grease Off Interior
- Made From Proprietary Custom Blended TPO
- Flexible Under Extreme Temperatures
- Textured Finish Keeps Cargo From Shifting
- Easy Installation
- Quick And Easy Cleanup
- WeatherTech Cargo Liners provide complete trunk - cargo area protection. Our cargo liners are computer designed to fit your vehicle and have a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your carpeting from normal wear and tear. Made from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under temperature extremes. The WeatherTech Cargo Liner features a textured finish which helps to keep cargo from shifting, and is perfect for hauling just about anything. Available in three colors, Black, Tan or Grey. Available for car trunks, SUVs and minivans. WeatherTech Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle's bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech Bumper Protector comes in two sizes: 30 in. long x 30 in. wide and 30 in. long x 40 in. wide. Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Ford Expedition |
Showing 1 - 10 of 10 products
Loading...