Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2025 - Ford Ranger |
- WIX Fuel (Complete In-Line) Filter
- Original Equipment Part Number 2C5Z9155BC
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.318
- Burst Pressure: 75
- Duty Type: Ld
- Micron: 14.00
- Media Material: Cellulose
- Outer Diameter Bottom: 2.01
- Class: A
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0FE00321, 23243, 2C5E9155BB, 2C5Z9155AA, 2C5Z9155BC, 3243, 33243, 5002200263, 61633243, 73243, 86243, BF7802, F65481, F65574, F65574P, FF260, FF756DL, FG1011...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2025 - Ford Ranger | V | - | United States | 6 Cyl 2.7L | 164 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number BE8Z6731AB Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2025 - Ford Ranger | L | 2300 | Canada | 4 Cyl 2.3L | 140 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 25011520 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2025 - Ford Ranger | V | 2956 | United States | 6 Cyl 3.0L | Raptor | 181 |
- FRAM, XG3614, Oil Filter
- 3/4" Thread Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: 3/4-16
- Grade: Ultimate
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Ford Ranger | L | 2300 | 4 Cyl 2.3L | 140 |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter 3/4" Thread
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Ford Ranger | L | 2300 | 4 Cyl 2.3L | 140 |
Showing 1 - 6 of 6 products
Loading...