Image
Product
Price
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 26
- 660
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 18
- 203
- 457
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K20161211, 10387758, 14076098, 15032160, 15149281, 1608770, 18150L, 23538, 25505363, 25509454, 28469, 294019, 2L3Z 18472 BB, 2L3Z 18472 BC, 32002247, 4107, 4361125, 43819...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | L | 2190 | Heater To Pipe-1 | GAS | 4 Cyl 2.2L | 134 |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | L | 2190 | Pipe-1 To Water Pump | GAS | 4 Cyl 2.2L | 134 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet S10 | V | - | 6 Cyl 4.3L | 262 |
- Small I.D. Molded
- Heater to Pipe 2 Re-use existing flow restrictor.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | L | 2190 | 4 Cyl 2.2L | Xtreme | 134 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet S10 | V | - | 6 Cyl 4.3L | 262 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 23.8
- 605
- End 1 Inside Diameter:
- .71
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .71
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11707, 15978377, 18139L, 19707, 63504, 8159783770, 88389, E88389
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | V | - | Heater To Engine | GAS | 6 Cyl 4.3L | 262 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 36.8
- 935
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11070, 15105740, 15729000, 18275L, 19070, 63505, 8157290000, 87739, D87739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | V | - | Heater To Water Pump | GAS | 6 Cyl 4.3L | 262 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10079, 10145763, 10241617, 12386911, 14005S, 15652879, 15668784, 15781525, 18079, 19129802, 22729506, 63223, 64325, 64425, 8156528790, 86112, 86115, 8724550360...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet S10 | L | 2190 | Pipe-1 To Engine | GAS | 4 Cyl 2.2L | 134 |
Showing 1 - 8 of 8 products
Loading...