Image
Product
Price
- HVAC Blower Motor Resistor
- 250 Degree Fahrenheit Thermal Limiter Excludes Dealer Installed Air Conditioning
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20261, 33-31981, 3A1124, 4C2Z19A706BA, BMR036, BMR10, E7TZ19A706A, JA1176, JA1502, RU1013, RU318, ZZL161D85, ZZL261D85, ZZM161D85
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
- Blower Motor Speed Resistor and Harness Pigtail
- 250 Degree Fahrenheit Thermal Limiter Factory Air Conditioning Includes Connector wo/Air Conditioning
- Product Attributes:
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Gasket Or Seal Included:
-
Features:
- Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality - made to perform like original equipment to restore full HVAC operation
- Trustworthy quality - backed by team of engineers and quality specialists in the USA
- This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20261, 3A1124, 4C2Z19A706BA, BMR036, E7TZ19A706A, JA1176, RU1013, RU318
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10030, 10239523, 10354454, 12553625, 14002S, 1405569A06, 1405616E10, 1405632F12, 14056V5022, 1628142020, 1628236030, 1628542010, 1629142020, 1635206, 1635221, 18030, 1J0122447BR, 24504912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Bronco | V | 5753 | Tee To Intake Manifold | GAS | 8 Cyl 5.8L | 351 |
- Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Bronco | V | 5753 | Tee To Water Pump | GAS | 8 Cyl 5.8L | 351 |
- Cut to Length, 32"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Bronco | V | 5753 | Heater To Tee | GAS | 8 Cyl 5.8L | 351 |
- Cut to Length, 32"; Protective sleeve required
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Bronco | V | 5753 | Heater To Pipe-1 | GAS | 8 Cyl 5.8L | 351 |
- with Integral A/C, with Thermal Limiter 250 Degrees Fahrenheit
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
- HVAC Blower Motor Resistor For Ford E-350 Super Duty E-250 F-150 F-250 F-350 HD
- with Factory Installed Air Condiitoning without Connector
- Mpulse HVAC Blower Motor Resistor SEN-2BMR0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger HD Club Wagon Bronco Aerostar Explorer Windstar Mazda II B4000 B3000 B2300 E-450
- Mpulse
- Product Attributes:
- WebNameEbay4: For Ford E-350 Super Duty E-250 F-150 Hd Hvac Blower Motor Resistor Sen-2bmr0284
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Resistor
- ComponentsSummaryShort: Hvac Blower Motor Resistor
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Resistor
- WebNamePlain: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Resistor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Resistor
- WebNameLong: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger Hd Club Wagon Bronco Aerostar Explorer Windstar Mazda Ii B4000 B3000 B2300 E-450 Navajo F-700 F-53 Motorhome Chassis F-800 F-600 F-200
- WebNameShort: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline
- ComponentsSummaryRegular: Hvac Blower Motor Resistor
- WebNameRegular: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger Hd Club Wagon Bronco Aerostar Explorer Windstar Mazda Ii B4000 B3000 B2300 E-450
- WebNameEbay2: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150
- WebNameEbay3: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 Hd
- WebNameEbay: Hvac Blower Motor Resistor For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Hd
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 3A1124 RU1013 2BMR0284 BR223 4C2Z-19A706-BA E7TZ-19A706-A RU318
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0284, 3A1124, 4C2Z-19A706-BA, BR223, E7TZ-19A706-A, N/A, RU1013, RU318
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
- Back Seat Heater
- Back Seat Heater
- Product Attributes:
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Actual Color: Black
-
Features:
- Provides Instant Warmth And Air Circulation
- Swivel Mounted Bracket
- Compact 12V Heater Wires
- 300W Heater Warms Vehicle Quickly
- The Back Seat Heater provides instant warmth and air circulation to keep backseat passengers warm and cozy. The heater has a swivel mounted bracket, compact 12V heater wires and 300W heater to warm your vehicle quickly. There is a limited 1 year warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Ford Bronco |
Showing 1 - 10 of 10 products
Loading...