Shop By Product Matching "HVAC"
Choose your Submodel for your 1996 Honda Accord
Image
Product
Price
- Small I.D. Heater Hose
- Product Attributes:
- : .63
- Centerline Length: 14
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
11143, 11410, 16248M, 16394M, 19143, 19410, 63989, 79721-SV4-000, 87245-48600, E87888
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | Valve To Intake Manifold | 4 Cyl 2.2L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- for fan or temp
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1996 - Honda Accord | Value Package |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | 4 Cyl 2.2L | - |
- Molded
- Outlet - Heater to Engine
- Outlet - Heater to Eng.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | 4 Cyl 2.2L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1996 - Honda Accord | V | 2675 | 4 | 6 Cyl 2.7L | EX | - |
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Honda Accord |
- Improved Design
- for fan or temp
- Set (3 Knobs; Carded)
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1996 - Honda Accord | Value Package |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | 4 Cyl 2.2L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | Pipe-4 To Pipe-5 | GAS | 4 Cyl 2.2L | N/A | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 1996 - Honda Accord | L | 2156 | Pipe-3 To Pipe-4 | GAS | 4 Cyl 2.2L | VTEC | - |
Showing 1 - 10 of 14 products
Loading...